Сборка ядра для Орикса — различия между версиями

Материал из SRNS
Перейти к: навигация, поиск
(Заставляем работать кросскомпилятор)
(Лог загрузки различных ядер)
 
(не показаны 44 промежуточные версии 2 участников)
Строка 21: Строка 21:
 
Поэтому простая подмена uImage тоже работает.
 
Поэтому простая подмена uImage тоже работает.
  
== Шаг 1. Устанавливаем кросскомпилятор ==
+
== Устанавливаем кросскомпилятор ==
  
 
Теоретически этот шаг можно пропустить, воспользовавшись билд-сервером. Но на практике я использовал кросс-компилятор от Xilinx'а.  
 
Теоретически этот шаг можно пропустить, воспользовавшись билд-сервером. Но на практике я использовал кросс-компилятор от Xilinx'а.  
Строка 84: Строка 84:
 
</source>
 
</source>
  
 +
После чего кросскомплилятор начинает успешно работать.
 +
 +
== Собираем Xilinx U-boot ==
 +
 +
Нам потребуется mkimage, которая входит в пакет сборки u-boot'а. Эта утилита позволяет завернуть файл ядра Image в uIamge, который уже может быть запущен u-boot'ом.
 +
 +
Забираем у Xilinx'a:
 +
<source lang="bash">
 +
git clone git://github.com/Xilinx/u-boot-xlnx.git
 +
</source>
 +
 +
Собираем (нам потребуется пока только mkimage, поэтому конкретный конфиг не важен):
 +
<source lang="bash">
 +
cd u-boot-xlnx
 +
make zynq_zc70x_config
 +
make
 +
</source>
 +
 +
В каталоге ./tools появился mkimage, которым мы далее будем пользоваться.
 +
 +
== Ядро от OSADL ==
 +
 +
Существует замечательная контора [https://www.osadl.org/ OSADL], занимающаяся тестированием PREEMPT_RT патча на различных сборках и архитектурах. [https://www.osadl.org/Profile-of-system-in-rack-b-slot-8.qa-profile-rbs8.0.html Они протестировали] ядро 3.12.24 с PREEMPT_RT патчем на ZedBoard. Более того, они предоставляют удобные скрипты, которые сами скачивают все нужные ядра (доступен по ссылке внизу страницы, [[media:ODASL_sct.tar|копия]]).
 +
 +
{{Hider|title = Конфигурационный файл ядра:
 +
|content = <source lang="bash">
 +
#
 +
# Automatically generated file; DO NOT EDIT.
 +
# Linux/arm 3.12.24 Kernel Configuration
 +
#
 +
CONFIG_ARM=y
 +
CONFIG_MIGHT_HAVE_PCI=y
 +
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 +
CONFIG_HAVE_PROC_CPU=y
 +
CONFIG_NO_IOPORT=y
 +
CONFIG_STACKTRACE_SUPPORT=y
 +
CONFIG_LOCKDEP_SUPPORT=y
 +
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 +
CONFIG_RWSEM_GENERIC_SPINLOCK=y
 +
CONFIG_ARCH_HAS_CPUFREQ=y
 +
CONFIG_GENERIC_HWEIGHT=y
 +
CONFIG_GENERIC_CALIBRATE_DELAY=y
 +
CONFIG_NEED_DMA_MAP_STATE=y
 +
CONFIG_VECTORS_BASE=0xffff0000
 +
CONFIG_ARM_PATCH_PHYS_VIRT=y
 +
CONFIG_GENERIC_BUG=y
 +
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 +
CONFIG_IRQ_WORK=y
 +
CONFIG_BUILDTIME_EXTABLE_SORT=y
 +
 +
#
 +
# General setup
 +
#
 +
CONFIG_INIT_ENV_ARG_LIMIT=32
 +
CONFIG_CROSS_COMPILE=""
 +
# CONFIG_COMPILE_TEST is not set
 +
CONFIG_LOCALVERSION=""
 +
CONFIG_LOCALVERSION_AUTO=y
 +
CONFIG_HAVE_KERNEL_GZIP=y
 +
CONFIG_HAVE_KERNEL_LZMA=y
 +
CONFIG_HAVE_KERNEL_XZ=y
 +
CONFIG_HAVE_KERNEL_LZO=y
 +
CONFIG_HAVE_KERNEL_LZ4=y
 +
CONFIG_KERNEL_GZIP=y
 +
# CONFIG_KERNEL_LZMA is not set
 +
# CONFIG_KERNEL_XZ is not set
 +
# CONFIG_KERNEL_LZO is not set
 +
# CONFIG_KERNEL_LZ4 is not set
 +
CONFIG_DEFAULT_HOSTNAME="(none)"
 +
CONFIG_SWAP=y
 +
CONFIG_SYSVIPC=y
 +
CONFIG_SYSVIPC_SYSCTL=y
 +
# CONFIG_POSIX_MQUEUE is not set
 +
# CONFIG_FHANDLE is not set
 +
# CONFIG_AUDIT is not set
 +
 +
#
 +
# IRQ subsystem
 +
#
 +
CONFIG_GENERIC_IRQ_PROBE=y
 +
CONFIG_GENERIC_IRQ_SHOW=y
 +
CONFIG_HARDIRQS_SW_RESEND=y
 +
CONFIG_GENERIC_IRQ_CHIP=y
 +
CONFIG_IRQ_DOMAIN=y
 +
CONFIG_IRQ_DOMAIN_DEBUG=y
 +
CONFIG_IRQ_FORCED_THREADING=y
 +
CONFIG_SPARSE_IRQ=y
 +
CONFIG_KTIME_SCALAR=y
 +
CONFIG_GENERIC_CLOCKEVENTS=y
 +
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 +
CONFIG_ARCH_HAS_TICK_BROADCAST=y
 +
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 +
 +
#
 +
# Timers subsystem
 +
#
 +
CONFIG_TICK_ONESHOT=y
 +
CONFIG_NO_HZ_COMMON=y
 +
# CONFIG_HZ_PERIODIC is not set
 +
CONFIG_NO_HZ_IDLE=y
 +
CONFIG_NO_HZ=y
 +
CONFIG_HIGH_RES_TIMERS=y
 +
 +
#
 +
# CPU/Task time and stats accounting
 +
#
 +
CONFIG_TICK_CPU_ACCOUNTING=y
 +
# CONFIG_IRQ_TIME_ACCOUNTING is not set
 +
# CONFIG_BSD_PROCESS_ACCT is not set
 +
CONFIG_CPU_IDLERUNTIME=y
 +
# CONFIG_TASKSTATS is not set
 +
 +
#
 +
# RCU Subsystem
 +
#
 +
CONFIG_TREE_PREEMPT_RCU=y
 +
CONFIG_PREEMPT_RCU=y
 +
CONFIG_RCU_STALL_COMMON=y
 +
# CONFIG_RCU_USER_QS is not set
 +
CONFIG_RCU_FANOUT=32
 +
CONFIG_RCU_FANOUT_LEAF=16
 +
# CONFIG_RCU_FANOUT_EXACT is not set
 +
# CONFIG_TREE_RCU_TRACE is not set
 +
CONFIG_RCU_BOOST=y
 +
CONFIG_RCU_BOOST_PRIO=1
 +
CONFIG_RCU_BOOST_DELAY=500
 +
# CONFIG_RCU_NOCB_CPU is not set
 +
CONFIG_IKCONFIG=y
 +
CONFIG_IKCONFIG_PROC=y
 +
CONFIG_IKPATCHSET=y
 +
CONFIG_IKPATCHSET_PROC=y
 +
CONFIG_LOG_BUF_SHIFT=17
 +
CONFIG_GENERIC_SCHED_CLOCK=y
 +
# CONFIG_CGROUPS is not set
 +
# CONFIG_CHECKPOINT_RESTORE is not set
 +
# CONFIG_NAMESPACES is not set
 +
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
 +
# CONFIG_SCHED_AUTOGROUP is not set
 +
# CONFIG_SYSFS_DEPRECATED is not set
 +
# CONFIG_RELAY is not set
 +
CONFIG_BLK_DEV_INITRD=y
 +
CONFIG_INITRAMFS_SOURCE=""
 +
CONFIG_RD_GZIP=y
 +
# CONFIG_RD_BZIP2 is not set
 +
# CONFIG_RD_LZMA is not set
 +
# CONFIG_RD_XZ is not set
 +
# CONFIG_RD_LZO is not set
 +
# CONFIG_RD_LZ4 is not set
 +
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 +
CONFIG_SYSCTL=y
 +
CONFIG_ANON_INODES=y
 +
CONFIG_HAVE_UID16=y
 +
CONFIG_EXPERT=y
 +
CONFIG_UID16=y
 +
CONFIG_SYSCTL_SYSCALL=y
 +
CONFIG_KALLSYMS=y
 +
# CONFIG_KALLSYMS_ALL is not set
 +
CONFIG_PRINTK=y
 +
CONFIG_BUG=y
 +
CONFIG_ELF_CORE=y
 +
CONFIG_BASE_FULL=y
 +
CONFIG_FUTEX=y
 +
CONFIG_EPOLL=y
 +
CONFIG_SIGNALFD=y
 +
CONFIG_TIMERFD=y
 +
CONFIG_EVENTFD=y
 +
CONFIG_SHMEM=y
 +
CONFIG_AIO=y
 +
CONFIG_PCI_QUIRKS=y
 +
CONFIG_EMBEDDED=y
 +
CONFIG_HAVE_PERF_EVENTS=y
 +
CONFIG_PERF_USE_VMALLOC=y
 +
 +
#
 +
# Kernel Performance Events And Counters
 +
#
 +
CONFIG_PERF_EVENTS=y
 +
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 +
CONFIG_VM_EVENT_COUNTERS=y
 +
CONFIG_SLUB_DEBUG=y
 +
CONFIG_COMPAT_BRK=y
 +
CONFIG_SLUB=y
 +
CONFIG_SLUB_CPU_PARTIAL=y
 +
# CONFIG_PROFILING is not set
 +
CONFIG_TRACEPOINTS=y
 +
CONFIG_HAVE_OPROFILE=y
 +
# CONFIG_KPROBES is not set
 +
# CONFIG_JUMP_LABEL is not set
 +
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
 +
CONFIG_HAVE_KPROBES=y
 +
CONFIG_HAVE_KRETPROBES=y
 +
CONFIG_HAVE_ARCH_TRACEHOOK=y
 +
CONFIG_HAVE_DMA_ATTRS=y
 +
CONFIG_HAVE_DMA_CONTIGUOUS=y
 +
CONFIG_USE_GENERIC_SMP_HELPERS=y
 +
CONFIG_GENERIC_SMP_IDLE_THREAD=y
 +
CONFIG_GENERIC_IDLE_POLL_SETUP=y
 +
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 +
CONFIG_HAVE_CLK=y
 +
CONFIG_HAVE_DMA_API_DEBUG=y
 +
CONFIG_HAVE_HW_BREAKPOINT=y
 +
CONFIG_HAVE_ARCH_JUMP_LABEL=y
 +
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 +
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 +
CONFIG_HAVE_CONTEXT_TRACKING=y
 +
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 +
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 +
CONFIG_MODULES_USE_ELF_REL=y
 +
CONFIG_CLONE_BACKWARDS=y
 +
CONFIG_OLD_SIGSUSPEND3=y
 +
CONFIG_OLD_SIGACTION=y
 +
 +
#
 +
# GCOV-based kernel profiling
 +
#
 +
# CONFIG_GCOV_KERNEL is not set
 +
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 +
CONFIG_SLABINFO=y
 +
CONFIG_RT_MUTEXES=y
 +
CONFIG_BASE_SMALL=0
 +
CONFIG_MODULES=y
 +
# CONFIG_MODULE_FORCE_LOAD is not set
 +
# CONFIG_MODULE_UNLOAD is not set
 +
# CONFIG_MODVERSIONS is not set
 +
# CONFIG_MODULE_SRCVERSION_ALL is not set
 +
# CONFIG_MODULE_SIG is not set
 +
CONFIG_STOP_MACHINE=y
 +
CONFIG_BLOCK=y
 +
CONFIG_LBDAF=y
 +
# CONFIG_BLK_DEV_BSG is not set
 +
# CONFIG_BLK_DEV_BSGLIB is not set
 +
# CONFIG_BLK_DEV_INTEGRITY is not set
 +
# CONFIG_BLK_CMDLINE_PARSER is not set
 +
 +
#
 +
# Partition Types
 +
#
 +
CONFIG_PARTITION_ADVANCED=y
 +
# CONFIG_ACORN_PARTITION is not set
 +
# CONFIG_AIX_PARTITION is not set
 +
# CONFIG_OSF_PARTITION is not set
 +
# CONFIG_AMIGA_PARTITION is not set
 +
# CONFIG_ATARI_PARTITION is not set
 +
# CONFIG_MAC_PARTITION is not set
 +
CONFIG_MSDOS_PARTITION=y
 +
CONFIG_BSD_DISKLABEL=y
 +
# CONFIG_MINIX_SUBPARTITION is not set
 +
# CONFIG_SOLARIS_X86_PARTITION is not set
 +
# CONFIG_UNIXWARE_DISKLABEL is not set
 +
CONFIG_LDM_PARTITION=y
 +
# CONFIG_LDM_DEBUG is not set
 +
# CONFIG_SGI_PARTITION is not set
 +
# CONFIG_ULTRIX_PARTITION is not set
 +
# CONFIG_SUN_PARTITION is not set
 +
# CONFIG_KARMA_PARTITION is not set
 +
CONFIG_EFI_PARTITION=y
 +
# CONFIG_SYSV68_PARTITION is not set
 +
# CONFIG_CMDLINE_PARTITION is not set
 +
 +
#
 +
# IO Schedulers
 +
#
 +
CONFIG_IOSCHED_NOOP=y
 +
CONFIG_IOSCHED_DEADLINE=y
 +
CONFIG_IOSCHED_CFQ=y
 +
# CONFIG_DEFAULT_DEADLINE is not set
 +
CONFIG_DEFAULT_CFQ=y
 +
# CONFIG_DEFAULT_NOOP is not set
 +
CONFIG_DEFAULT_IOSCHED="cfq"
 +
# CONFIG_FREEZER is not set
 +
 +
#
 +
# System Type
 +
#
 +
CONFIG_MMU=y
 +
CONFIG_ARCH_MULTIPLATFORM=y
 +
# CONFIG_ARCH_INTEGRATOR is not set
 +
# CONFIG_ARCH_REALVIEW is not set
 +
# CONFIG_ARCH_VERSATILE is not set
 +
# CONFIG_ARCH_AT91 is not set
 +
# CONFIG_ARCH_CLPS711X is not set
 +
# CONFIG_ARCH_GEMINI is not set
 +
# CONFIG_ARCH_EBSA110 is not set
 +
# CONFIG_ARCH_EP93XX is not set
 +
# CONFIG_ARCH_FOOTBRIDGE is not set
 +
# CONFIG_ARCH_NETX is not set
 +
# CONFIG_ARCH_IOP13XX is not set
 +
# CONFIG_ARCH_IOP32X is not set
 +
# CONFIG_ARCH_IOP33X is not set
 +
# CONFIG_ARCH_IXP4XX is not set
 +
# CONFIG_ARCH_DOVE is not set
 +
# CONFIG_ARCH_KIRKWOOD is not set
 +
# CONFIG_ARCH_MV78XX0 is not set
 +
# CONFIG_ARCH_ORION5X is not set
 +
# CONFIG_ARCH_MMP is not set
 +
# CONFIG_ARCH_KS8695 is not set
 +
# CONFIG_ARCH_W90X900 is not set
 +
# CONFIG_ARCH_LPC32XX is not set
 +
# CONFIG_ARCH_PXA is not set
 +
# CONFIG_ARCH_MSM is not set
 +
# CONFIG_ARCH_SHMOBILE is not set
 +
# CONFIG_ARCH_RPC is not set
 +
# CONFIG_ARCH_SA1100 is not set
 +
# CONFIG_ARCH_S3C24XX is not set
 +
# CONFIG_ARCH_S3C64XX is not set
 +
# CONFIG_ARCH_S5P64X0 is not set
 +
# CONFIG_ARCH_S5PC100 is not set
 +
# CONFIG_ARCH_S5PV210 is not set
 +
# CONFIG_ARCH_EXYNOS is not set
 +
# CONFIG_ARCH_SHARK is not set
 +
# CONFIG_ARCH_DAVINCI is not set
 +
# CONFIG_ARCH_OMAP1 is not set
 +
 +
#
 +
# Multiple platform selection
 +
#
 +
 +
#
 +
# CPU Core family selection
 +
#
 +
# CONFIG_ARCH_MULTI_V6 is not set
 +
CONFIG_ARCH_MULTI_V7=y
 +
CONFIG_ARCH_MULTI_V6_V7=y
 +
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
 +
# CONFIG_ARCH_MVEBU is not set
 +
# CONFIG_ARCH_BCM is not set
 +
# CONFIG_GPIO_PCA953X is not set
 +
# CONFIG_KEYBOARD_GPIO_POLLED is not set
 +
# CONFIG_ARCH_HIGHBANK is not set
 +
# CONFIG_ARCH_KEYSTONE is not set
 +
# CONFIG_ARCH_MXC is not set
 +
# CONFIG_ARCH_OMAP3 is not set
 +
# CONFIG_ARCH_OMAP4 is not set
 +
# CONFIG_SOC_OMAP5 is not set
 +
# CONFIG_SOC_AM33XX is not set
 +
# CONFIG_SOC_AM43XX is not set
 +
# CONFIG_ARCH_ROCKCHIP is not set
 +
# CONFIG_ARCH_SOCFPGA is not set
 +
# CONFIG_PLAT_SPEAR is not set
 +
# CONFIG_ARCH_STI is not set
 +
# CONFIG_ARCH_SHMOBILE_MULTI is not set
 +
# CONFIG_ARCH_SUNXI is not set
 +
# CONFIG_ARCH_SIRF is not set
 +
# CONFIG_ARCH_TEGRA is not set
 +
# CONFIG_ARCH_U8500 is not set
 +
CONFIG_ARCH_VEXPRESS=y
 +
 +
#
 +
# Versatile Express platform type
 +
#
 +
CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
 +
# CONFIG_ARCH_VEXPRESS_CA9X4 is not set
 +
CONFIG_PLAT_VERSATILE_CLCD=y
 +
CONFIG_PLAT_VERSATILE_SCHED_CLOCK=y
 +
# CONFIG_ARCH_VIRT is not set
 +
# CONFIG_ARCH_WM8850 is not set
 +
CONFIG_ARCH_ZYNQ=y
 +
 +
#
 +
# Xilinx Specific Options
 +
#
 +
CONFIG_XILINX_L1_PREFETCH=y
 +
CONFIG_XILINX_L2_PREFETCH=y
 +
CONFIG_XILINX_AXIPCIE=y
 +
CONFIG_PLAT_VERSATILE=y
 +
CONFIG_ARM_TIMER_SP804=y
 +
 +
#
 +
# Processor Type
 +
#
 +
CONFIG_CPU_V7=y
 +
CONFIG_CPU_32v6K=y
 +
CONFIG_CPU_32v7=y
 +
CONFIG_CPU_ABRT_EV7=y
 +
CONFIG_CPU_PABRT_V7=y
 +
CONFIG_CPU_CACHE_V7=y
 +
CONFIG_CPU_CACHE_VIPT=y
 +
CONFIG_CPU_COPY_V6=y
 +
CONFIG_CPU_TLB_V7=y
 +
CONFIG_CPU_HAS_ASID=y
 +
CONFIG_CPU_CP15=y
 +
CONFIG_CPU_CP15_MMU=y
 +
 +
#
 +
# Processor Features
 +
#
 +
# CONFIG_ARM_LPAE is not set
 +
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 +
CONFIG_ARM_THUMB=y
 +
# CONFIG_ARM_THUMBEE is not set
 +
CONFIG_ARM_VIRT_EXT=y
 +
CONFIG_SWP_EMULATE=y
 +
# CONFIG_CPU_ICACHE_DISABLE is not set
 +
# CONFIG_CPU_DCACHE_DISABLE is not set
 +
# CONFIG_CPU_BPREDICT_DISABLE is not set
 +
CONFIG_KUSER_HELPERS=y
 +
CONFIG_OUTER_CACHE=y
 +
CONFIG_OUTER_CACHE_SYNC=y
 +
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 +
CONFIG_CACHE_L2X0=y
 +
CONFIG_CACHE_PL310=y
 +
CONFIG_ARM_L1_CACHE_SHIFT_6=y
 +
CONFIG_ARM_L1_CACHE_SHIFT=6
 +
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
 +
CONFIG_ARM_NR_BANKS=8
 +
CONFIG_MULTI_IRQ_HANDLER=y
 +
# CONFIG_ARM_ERRATA_430973 is not set
 +
CONFIG_PL310_ERRATA_588369=y
 +
# CONFIG_ARM_ERRATA_643719 is not set
 +
CONFIG_ARM_ERRATA_720789=y
 +
CONFIG_PL310_ERRATA_727915=y
 +
CONFIG_PL310_ERRATA_753970=y
 +
CONFIG_ARM_ERRATA_754322=y
 +
CONFIG_ARM_ERRATA_754327=y
 +
CONFIG_ARM_ERRATA_764369=y
 +
CONFIG_PL310_ERRATA_769419=y
 +
CONFIG_ARM_ERRATA_775420=y
 +
# CONFIG_ARM_ERRATA_798181 is not set
 +
# CONFIG_ARM_ERRATA_773022 is not set
 +
CONFIG_ICST=y
 +
 +
#
 +
# Bus support
 +
#
 +
CONFIG_ARM_AMBA=y
 +
CONFIG_PCI=y
 +
CONFIG_PCI_SYSCALL=y
 +
CONFIG_PCI_MSI=y
 +
# CONFIG_PCI_DEBUG is not set
 +
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
 +
# CONFIG_PCI_STUB is not set
 +
# CONFIG_PCI_IOV is not set
 +
# CONFIG_PCI_PRI is not set
 +
# CONFIG_PCI_PASID is not set
 +
 +
#
 +
# PCI host controller drivers
 +
#
 +
# CONFIG_PCIEPORTBUS is not set
 +
# CONFIG_PCCARD is not set
 +
 +
#
 +
# Kernel Features
 +
#
 +
CONFIG_HAVE_SMP=y
 +
CONFIG_SMP=y
 +
CONFIG_SMP_ON_UP=y
 +
CONFIG_ARM_CPU_TOPOLOGY=y
 +
CONFIG_SCHED_MC=y
 +
CONFIG_SCHED_SMT=y
 +
CONFIG_HAVE_ARM_SCU=y
 +
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
 +
CONFIG_HAVE_ARM_TWD=y
 +
# CONFIG_MCPM is not set
 +
CONFIG_VMSPLIT_3G=y
 +
# CONFIG_VMSPLIT_2G is not set
 +
# CONFIG_VMSPLIT_1G is not set
 +
CONFIG_PAGE_OFFSET=0xC0000000
 +
CONFIG_NR_CPUS=4
 +
CONFIG_HOTPLUG_CPU=y
 +
# CONFIG_ARM_PSCI is not set
 +
CONFIG_ARCH_NR_GPIO=1024
 +
CONFIG_PREEMPT=y
 +
CONFIG_PREEMPT_RT_BASE=y
 +
CONFIG_HAVE_PREEMPT_LAZY=y
 +
CONFIG_PREEMPT_LAZY=y
 +
# CONFIG_PREEMPT_NONE is not set
 +
# CONFIG_PREEMPT_VOLUNTARY is not set
 +
# CONFIG_PREEMPT__LL is not set
 +
# CONFIG_PREEMPT_RTB is not set
 +
CONFIG_PREEMPT_RT_FULL=y
 +
CONFIG_PREEMPT_COUNT=y
 +
CONFIG_HZ_FIXED=0
 +
CONFIG_HZ_100=y
 +
# CONFIG_HZ_200 is not set
 +
# CONFIG_HZ_250 is not set
 +
# CONFIG_HZ_300 is not set
 +
# CONFIG_HZ_500 is not set
 +
# CONFIG_HZ_1000 is not set
 +
CONFIG_HZ=100
 +
CONFIG_SCHED_HRTICK=y
 +
# CONFIG_THUMB2_KERNEL is not set
 +
CONFIG_AEABI=y
 +
# CONFIG_OABI_COMPAT is not set
 +
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 +
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 +
CONFIG_HAVE_ARCH_PFN_VALID=y
 +
CONFIG_HIGHMEM=y
 +
# CONFIG_HIGHPTE is not set
 +
CONFIG_HW_PERF_EVENTS=y
 +
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 +
CONFIG_FLATMEM=y
 +
CONFIG_FLAT_NODE_MEM_MAP=y
 +
CONFIG_HAVE_MEMBLOCK=y
 +
CONFIG_MEMORY_ISOLATION=y
 +
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 +
CONFIG_PAGEFLAGS_EXTENDED=y
 +
CONFIG_SPLIT_PTLOCK_CPUS=4
 +
# CONFIG_COMPACTION is not set
 +
CONFIG_MIGRATION=y
 +
# CONFIG_PHYS_ADDR_T_64BIT is not set
 +
CONFIG_ZONE_DMA_FLAG=0
 +
CONFIG_BOUNCE=y
 +
# CONFIG_KSM is not set
 +
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 +
CONFIG_CROSS_MEMORY_ATTACH=y
 +
# CONFIG_CLEANCACHE is not set
 +
# CONFIG_FRONTSWAP is not set
 +
CONFIG_CMA=y
 +
# CONFIG_CMA_DEBUG is not set
 +
# CONFIG_ZBUD is not set
 +
CONFIG_FORCE_MAX_ZONEORDER=11
 +
CONFIG_ALIGNMENT_TRAP=y
 +
# CONFIG_UACCESS_WITH_MEMCPY is not set
 +
# CONFIG_SECCOMP is not set
 +
# CONFIG_CC_STACKPROTECTOR is not set
 +
# CONFIG_XEN is not set
 +
 +
#
 +
# Boot options
 +
#
 +
CONFIG_USE_OF=y
 +
CONFIG_ATAGS=y
 +
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
 +
CONFIG_ZBOOT_ROM_TEXT=0x0
 +
CONFIG_ZBOOT_ROM_BSS=0x0
 +
# CONFIG_ARM_APPENDED_DTB is not set
 +
CONFIG_CMDLINE="console=ttyPS0,115200n8 root=/dev/mmcblk0p2 rw earlyprintk"
 +
CONFIG_CMDLINE_FROM_BOOTLOADER=y
 +
# CONFIG_CMDLINE_EXTEND is not set
 +
# CONFIG_CMDLINE_FORCE is not set
 +
# CONFIG_CRASH_DUMP is not set
 +
CONFIG_AUTO_ZRELADDR=y
 +
 +
#
 +
# CPU Power Management
 +
#
 +
 +
#
 +
# CPU Frequency scaling
 +
#
 +
CONFIG_CPU_FREQ=y
 +
CONFIG_CPU_FREQ_TABLE=y
 +
CONFIG_CPU_FREQ_GOV_COMMON=y
 +
CONFIG_CPU_FREQ_STAT=y
 +
CONFIG_CPU_FREQ_STAT_DETAILS=y
 +
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
 +
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 +
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 +
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 +
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 +
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 +
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 +
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 +
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 +
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 +
 +
#
 +
# ARM CPU frequency scaling drivers
 +
#
 +
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
 +
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
 +
CONFIG_ARM_ZYNQ_CPUFREQ=y
 +
 +
#
 +
# CPU Idle
 +
#
 +
CONFIG_CPU_IDLE=y
 +
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
 +
CONFIG_CPU_IDLE_GOV_LADDER=y
 +
CONFIG_CPU_IDLE_GOV_MENU=y
 +
 +
#
 +
# ARM CPU Idle Drivers
 +
#
 +
CONFIG_ARM_ZYNQ_CPUIDLE=y
 +
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 +
 +
#
 +
# Floating point emulation
 +
#
 +
 +
#
 +
# At least one emulation must be selected
 +
#
 +
CONFIG_VFP=y
 +
CONFIG_VFPv3=y
 +
CONFIG_NEON=y
 +
# CONFIG_KERNEL_MODE_NEON is not set
 +
 +
#
 +
# Userspace binary formats
 +
#
 +
CONFIG_BINFMT_ELF=y
 +
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 +
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 +
CONFIG_BINFMT_SCRIPT=y
 +
# CONFIG_HAVE_AOUT is not set
 +
# CONFIG_BINFMT_MISC is not set
 +
CONFIG_COREDUMP=y
 +
 +
#
 +
# Power management options
 +
#
 +
# CONFIG_SUSPEND is not set
 +
# CONFIG_PM_RUNTIME is not set
 +
CONFIG_ARCH_HAS_OPP=y
 +
CONFIG_PM_OPP=y
 +
CONFIG_CPU_PM=y
 +
CONFIG_ARCH_SUSPEND_POSSIBLE=y
 +
# CONFIG_ARM_CPU_SUSPEND is not set
 +
CONFIG_NET=y
 +
 +
#
 +
# Networking options
 +
#
 +
CONFIG_PACKET=y
 +
# CONFIG_PACKET_DIAG is not set
 +
CONFIG_UNIX=y
 +
# CONFIG_UNIX_DIAG is not set
 +
CONFIG_XFRM=y
 +
# CONFIG_XFRM_USER is not set
 +
# CONFIG_XFRM_SUB_POLICY is not set
 +
# CONFIG_XFRM_MIGRATE is not set
 +
# CONFIG_XFRM_STATISTICS is not set
 +
# CONFIG_NET_KEY is not set
 +
CONFIG_INET=y
 +
CONFIG_IP_MULTICAST=y
 +
# CONFIG_IP_ADVANCED_ROUTER is not set
 +
CONFIG_IP_PNP=y
 +
CONFIG_IP_PNP_DHCP=y
 +
CONFIG_IP_PNP_BOOTP=y
 +
CONFIG_IP_PNP_RARP=y
 +
CONFIG_NET_IPIP=y
 +
# CONFIG_NET_IPGRE_DEMUX is not set
 +
CONFIG_NET_IP_TUNNEL=y
 +
# CONFIG_IP_MROUTE is not set
 +
# CONFIG_SYN_COOKIES is not set
 +
# CONFIG_NET_IPVTI is not set
 +
# CONFIG_INET_AH is not set
 +
# CONFIG_INET_ESP is not set
 +
# CONFIG_INET_IPCOMP is not set
 +
# CONFIG_INET_XFRM_TUNNEL is not set
 +
CONFIG_INET_TUNNEL=y
 +
CONFIG_INET_XFRM_MODE_TRANSPORT=y
 +
CONFIG_INET_XFRM_MODE_TUNNEL=y
 +
CONFIG_INET_XFRM_MODE_BEET=y
 +
CONFIG_INET_LRO=y
 +
CONFIG_INET_DIAG=y
 +
CONFIG_INET_TCP_DIAG=y
 +
# CONFIG_INET_UDP_DIAG is not set
 +
# CONFIG_TCP_CONG_ADVANCED is not set
 +
CONFIG_TCP_CONG_CUBIC=y
 +
CONFIG_DEFAULT_TCP_CONG="cubic"
 +
# CONFIG_TCP_MD5SIG is not set
 +
CONFIG_IPV6=y
 +
# CONFIG_IPV6_PRIVACY is not set
 +
# CONFIG_IPV6_ROUTER_PREF is not set
 +
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 +
# CONFIG_INET6_AH is not set
 +
# CONFIG_INET6_ESP is not set
 +
# CONFIG_INET6_IPCOMP is not set
 +
# CONFIG_IPV6_MIP6 is not set
 +
# CONFIG_INET6_XFRM_TUNNEL is not set
 +
# CONFIG_INET6_TUNNEL is not set
 +
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 +
CONFIG_INET6_XFRM_MODE_TUNNEL=y
 +
CONFIG_INET6_XFRM_MODE_BEET=y
 +
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 +
CONFIG_IPV6_SIT=y
 +
# CONFIG_IPV6_SIT_6RD is not set
 +
CONFIG_IPV6_NDISC_NODETYPE=y
 +
# CONFIG_IPV6_TUNNEL is not set
 +
# CONFIG_IPV6_GRE is not set
 +
# CONFIG_IPV6_MULTIPLE_TABLES is not set
 +
# CONFIG_IPV6_MROUTE is not set
 +
# CONFIG_NETWORK_SECMARK is not set
 +
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
 +
# CONFIG_NETFILTER is not set
 +
# CONFIG_IP_DCCP is not set
 +
# CONFIG_IP_SCTP is not set
 +
# CONFIG_RDS is not set
 +
# CONFIG_TIPC is not set
 +
# CONFIG_ATM is not set
 +
# CONFIG_L2TP is not set
 +
# CONFIG_BRIDGE is not set
 +
CONFIG_HAVE_NET_DSA=y
 +
CONFIG_VLAN_8021Q=y
 +
# CONFIG_VLAN_8021Q_GVRP is not set
 +
# CONFIG_VLAN_8021Q_MVRP is not set
 +
# CONFIG_DECNET is not set
 +
# CONFIG_LLC2 is not set
 +
# CONFIG_IPX is not set
 +
# CONFIG_ATALK is not set
 +
# CONFIG_X25 is not set
 +
# CONFIG_LAPB is not set
 +
# CONFIG_PHONET is not set
 +
# CONFIG_IEEE802154 is not set
 +
# CONFIG_NET_SCHED is not set
 +
# CONFIG_DCB is not set
 +
# CONFIG_BATMAN_ADV is not set
 +
# CONFIG_OPENVSWITCH is not set
 +
# CONFIG_VSOCKETS is not set
 +
# CONFIG_NETLINK_MMAP is not set
 +
# CONFIG_NETLINK_DIAG is not set
 +
# CONFIG_NET_MPLS_GSO is not set
 +
CONFIG_RPS=y
 +
CONFIG_RFS_ACCEL=y
 +
CONFIG_XPS=y
 +
CONFIG_NET_RX_BUSY_POLL=y
 +
CONFIG_BQL=y
 +
# CONFIG_BPF_JIT is not set
 +
CONFIG_NET_FLOW_LIMIT=y
 +
 +
#
 +
# Network testing
 +
#
 +
# CONFIG_NET_PKTGEN is not set
 +
# CONFIG_NET_DROP_MONITOR is not set
 +
# CONFIG_HAMRADIO is not set
 +
# CONFIG_CAN is not set
 +
# CONFIG_IRDA is not set
 +
# CONFIG_BT is not set
 +
# CONFIG_AF_RXRPC is not set
 +
CONFIG_WIRELESS=y
 +
# CONFIG_CFG80211 is not set
 +
# CONFIG_LIB80211 is not set
 +
 +
#
 +
# CFG80211 needs to be enabled for MAC80211
 +
#
 +
# CONFIG_WIMAX is not set
 +
# CONFIG_RFKILL is not set
 +
# CONFIG_NET_9P is not set
 +
# CONFIG_CAIF is not set
 +
# CONFIG_CEPH_LIB is not set
 +
# CONFIG_NFC is not set
 +
CONFIG_HAVE_BPF_JIT=y
 +
 +
#
 +
# Device Drivers
 +
#
 +
 +
#
 +
# Generic Driver Options
 +
#
 +
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 +
CONFIG_DEVTMPFS=y
 +
CONFIG_DEVTMPFS_MOUNT=y
 +
CONFIG_STANDALONE=y
 +
CONFIG_PREVENT_FIRMWARE_BUILD=y
 +
CONFIG_FW_LOADER=y
 +
CONFIG_FIRMWARE_IN_KERNEL=y
 +
CONFIG_EXTRA_FIRMWARE=""
 +
CONFIG_FW_LOADER_USER_HELPER=y
 +
# CONFIG_DEBUG_DRIVER is not set
 +
# CONFIG_DEBUG_DEVRES is not set
 +
# CONFIG_SYS_HYPERVISOR is not set
 +
# CONFIG_GENERIC_CPU_DEVICES is not set
 +
CONFIG_REGMAP=y
 +
CONFIG_REGMAP_I2C=y
 +
# CONFIG_DMA_SHARED_BUFFER is not set
 +
# CONFIG_DMA_CMA is not set
 +
 +
#
 +
# Bus devices
 +
#
 +
# CONFIG_ARM_CCI is not set
 +
CONFIG_CONNECTOR=y
 +
CONFIG_PROC_EVENTS=y
 +
CONFIG_MTD=y
 +
# CONFIG_MTD_TESTS is not set
 +
# CONFIG_MTD_REDBOOT_PARTS is not set
 +
CONFIG_MTD_CMDLINE_PARTS=y
 +
# CONFIG_MTD_AFS_PARTS is not set
 +
CONFIG_MTD_OF_PARTS=y
 +
# CONFIG_MTD_AR7_PARTS is not set
 +
 +
#
 +
# User Modules And Translation Layers
 +
#
 +
CONFIG_MTD_BLKDEVS=y
 +
CONFIG_MTD_BLOCK=y
 +
# CONFIG_FTL is not set
 +
# CONFIG_NFTL is not set
 +
# CONFIG_INFTL is not set
 +
# CONFIG_RFD_FTL is not set
 +
# CONFIG_SSFDC is not set
 +
# CONFIG_SM_FTL is not set
 +
# CONFIG_MTD_OOPS is not set
 +
# CONFIG_MTD_SWAP is not set
 +
 +
#
 +
# RAM/ROM/Flash chip drivers
 +
#
 +
CONFIG_MTD_CFI=y
 +
# CONFIG_MTD_JEDECPROBE is not set
 +
CONFIG_MTD_GEN_PROBE=y
 +
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 +
CONFIG_MTD_MAP_BANK_WIDTH_1=y
 +
CONFIG_MTD_MAP_BANK_WIDTH_2=y
 +
CONFIG_MTD_MAP_BANK_WIDTH_4=y
 +
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 +
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 +
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 +
CONFIG_MTD_CFI_I1=y
 +
CONFIG_MTD_CFI_I2=y
 +
# CONFIG_MTD_CFI_I4 is not set
 +
# CONFIG_MTD_CFI_I8 is not set
 +
# CONFIG_MTD_CFI_INTELEXT is not set
 +
CONFIG_MTD_CFI_AMDSTD=y
 +
# CONFIG_MTD_CFI_STAA is not set
 +
CONFIG_MTD_CFI_UTIL=y
 +
# CONFIG_MTD_RAM is not set
 +
# CONFIG_MTD_ROM is not set
 +
# CONFIG_MTD_ABSENT is not set
 +
 +
#
 +
# Mapping drivers for chip access
 +
#
 +
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 +
CONFIG_MTD_PHYSMAP=y
 +
# CONFIG_MTD_PHYSMAP_COMPAT is not set
 +
CONFIG_MTD_PHYSMAP_OF=y
 +
# CONFIG_MTD_INTEL_VR_NOR is not set
 +
# CONFIG_MTD_PLATRAM is not set
 +
 +
#
 +
# Self-contained MTD device drivers
 +
#
 +
# CONFIG_MTD_PMC551 is not set
 +
# CONFIG_MTD_DATAFLASH is not set
 +
CONFIG_MTD_M25P80=y
 +
# CONFIG_M25PXX_USE_FAST_READ is not set
 +
# CONFIG_MTD_SST25L is not set
 +
# CONFIG_MTD_SLRAM is not set
 +
# CONFIG_MTD_PHRAM is not set
 +
# CONFIG_MTD_MTDRAM is not set
 +
# CONFIG_MTD_BLOCK2MTD is not set
 +
 +
#
 +
# Disk-On-Chip Device Drivers
 +
#
 +
# CONFIG_MTD_DOCG3 is not set
 +
CONFIG_MTD_NAND_ECC=y
 +
# CONFIG_MTD_NAND_ECC_SMC is not set
 +
CONFIG_MTD_NAND=y
 +
# CONFIG_MTD_NAND_ECC_BCH is not set
 +
# CONFIG_MTD_SM_COMMON is not set
 +
# CONFIG_MTD_NAND_DENALI is not set
 +
# CONFIG_MTD_NAND_GPIO is not set
 +
CONFIG_MTD_NAND_IDS=y
 +
# CONFIG_MTD_NAND_RICOH is not set
 +
# CONFIG_MTD_NAND_DISKONCHIP is not set
 +
# CONFIG_MTD_NAND_DOCG4 is not set
 +
# CONFIG_MTD_NAND_CAFE is not set
 +
# CONFIG_MTD_NAND_NANDSIM is not set
 +
# CONFIG_MTD_NAND_PLATFORM is not set
 +
CONFIG_MTD_NAND_ZYNQ=y
 +
# CONFIG_MTD_ONENAND is not set
 +
 +
#
 +
# LPDDR flash memory drivers
 +
#
 +
# CONFIG_MTD_LPDDR is not set
 +
# CONFIG_MTD_UBI is not set
 +
CONFIG_DTC=y
 +
CONFIG_OF=y
 +
 +
#
 +
# Device Tree and Open Firmware support
 +
#
 +
CONFIG_PROC_DEVICETREE=y
 +
# CONFIG_OF_SELFTEST is not set
 +
CONFIG_OF_FLATTREE=y
 +
CONFIG_OF_EARLY_FLATTREE=y
 +
CONFIG_OF_ADDRESS=y
 +
CONFIG_OF_IRQ=y
 +
CONFIG_OF_NET=y
 +
CONFIG_OF_MDIO=y
 +
CONFIG_OF_PCI=y
 +
CONFIG_OF_PCI_IRQ=y
 +
CONFIG_OF_MTD=y
 +
# CONFIG_PARPORT is not set
 +
CONFIG_BLK_DEV=y
 +
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
 +
# CONFIG_BLK_CPQ_CISS_DA is not set
 +
# CONFIG_BLK_DEV_DAC960 is not set
 +
# CONFIG_BLK_DEV_UMEM is not set
 +
# CONFIG_BLK_DEV_COW_COMMON is not set
 +
CONFIG_BLK_DEV_LOOP=y
 +
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
 +
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 +
# CONFIG_BLK_DEV_DRBD is not set
 +
# CONFIG_BLK_DEV_NBD is not set
 +
# CONFIG_BLK_DEV_NVME is not set
 +
# CONFIG_BLK_DEV_SX8 is not set
 +
CONFIG_BLK_DEV_RAM=y
 +
CONFIG_BLK_DEV_RAM_COUNT=16
 +
CONFIG_BLK_DEV_RAM_SIZE=16384
 +
# CONFIG_BLK_DEV_XIP is not set
 +
# CONFIG_CDROM_PKTCDVD is not set
 +
# CONFIG_ATA_OVER_ETH is not set
 +
# CONFIG_MG_DISK is not set
 +
# CONFIG_VIRTIO_BLK is not set
 +
# CONFIG_BLK_DEV_RBD is not set
 +
# CONFIG_BLK_DEV_RSXX is not set
 +
 +
#
 +
# Misc devices
 +
#
 +
# CONFIG_SENSORS_LIS3LV02D is not set
 +
# CONFIG_AD525X_DPOT is not set
 +
# CONFIG_ATMEL_PWM is not set
 +
# CONFIG_DUMMY_IRQ is not set
 +
CONFIG_HWLAT_DETECTOR=y
 +
# CONFIG_PHANTOM is not set
 +
# CONFIG_SGI_IOC4 is not set
 +
# CONFIG_TIFM_CORE is not set
 +
# CONFIG_ICS932S401 is not set
 +
# CONFIG_ATMEL_SSC is not set
 +
# CONFIG_ENCLOSURE_SERVICES is not set
 +
# CONFIG_HP_ILO is not set
 +
# CONFIG_APDS9802ALS is not set
 +
# CONFIG_ISL29003 is not set
 +
# CONFIG_ISL29020 is not set
 +
# CONFIG_SENSORS_TSL2550 is not set
 +
# CONFIG_SENSORS_BH1780 is not set
 +
# CONFIG_SENSORS_BH1770 is not set
 +
# CONFIG_SENSORS_APDS990X is not set
 +
# CONFIG_HMC6352 is not set
 +
# CONFIG_DS1682 is not set
 +
# CONFIG_TI_DAC7512 is not set
 +
# CONFIG_ARM_CHARLCD is not set
 +
# CONFIG_BMP085_I2C is not set
 +
# CONFIG_BMP085_SPI is not set
 +
# CONFIG_PCH_PHUB is not set
 +
# CONFIG_USB_SWITCH_FSA9480 is not set
 +
# CONFIG_SI570 is not set
 +
# CONFIG_LATTICE_ECP3_CONFIG is not set
 +
CONFIG_SRAM=y
 +
# CONFIG_C2PORT is not set
 +
 +
#
 +
# EEPROM support
 +
#
 +
CONFIG_EEPROM_AT24=y
 +
CONFIG_EEPROM_AT25=y
 +
# CONFIG_EEPROM_LEGACY is not set
 +
# CONFIG_EEPROM_MAX6875 is not set
 +
# CONFIG_EEPROM_93CX6 is not set
 +
# CONFIG_EEPROM_93XX46 is not set
 +
# CONFIG_CB710_CORE is not set
 +
 +
#
 +
# Texas Instruments shared transport line discipline
 +
#
 +
# CONFIG_TI_ST is not set
 +
# CONFIG_SENSORS_LIS3_SPI is not set
 +
# CONFIG_SENSORS_LIS3_I2C is not set
 +
 +
#
 +
# Altera FPGA firmware download module
 +
#
 +
# CONFIG_ALTERA_STAPL is not set
 +
CONFIG_HAVE_IDE=y
 +
# CONFIG_IDE is not set
 +
 +
#
 +
# SCSI device support
 +
#
 +
CONFIG_SCSI_MOD=y
 +
# CONFIG_RAID_ATTRS is not set
 +
CONFIG_SCSI=y
 +
CONFIG_SCSI_DMA=y
 +
# CONFIG_SCSI_TGT is not set
 +
# CONFIG_SCSI_NETLINK is not set
 +
CONFIG_SCSI_PROC_FS=y
 +
 +
#
 +
# SCSI support type (disk, tape, CD-ROM)
 +
#
 +
CONFIG_BLK_DEV_SD=y
 +
# CONFIG_CHR_DEV_ST is not set
 +
# CONFIG_CHR_DEV_OSST is not set
 +
# CONFIG_BLK_DEV_SR is not set
 +
CONFIG_CHR_DEV_SG=y
 +
# CONFIG_CHR_DEV_SCH is not set
 +
CONFIG_SCSI_MULTI_LUN=y
 +
# CONFIG_SCSI_CONSTANTS is not set
 +
# CONFIG_SCSI_LOGGING is not set
 +
# CONFIG_SCSI_SCAN_ASYNC is not set
 +
 +
#
 +
# SCSI Transports
 +
#
 +
# CONFIG_SCSI_SPI_ATTRS is not set
 +
# CONFIG_SCSI_FC_ATTRS is not set
 +
# CONFIG_SCSI_ISCSI_ATTRS is not set
 +
# CONFIG_SCSI_SAS_ATTRS is not set
 +
# CONFIG_SCSI_SAS_LIBSAS is not set
 +
# CONFIG_SCSI_SRP_ATTRS is not set
 +
CONFIG_SCSI_LOWLEVEL=y
 +
# CONFIG_ISCSI_TCP is not set
 +
# CONFIG_ISCSI_BOOT_SYSFS is not set
 +
# CONFIG_SCSI_CXGB3_ISCSI is not set
 +
# CONFIG_SCSI_CXGB4_ISCSI is not set
 +
# CONFIG_SCSI_BNX2_ISCSI is not set
 +
# CONFIG_SCSI_BNX2X_FCOE is not set
 +
# CONFIG_BE2ISCSI is not set
 +
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 +
# CONFIG_SCSI_HPSA is not set
 +
# CONFIG_SCSI_3W_9XXX is not set
 +
# CONFIG_SCSI_3W_SAS is not set
 +
# CONFIG_SCSI_ACARD is not set
 +
# CONFIG_SCSI_AACRAID is not set
 +
# CONFIG_SCSI_AIC7XXX is not set
 +
# CONFIG_SCSI_AIC7XXX_OLD is not set
 +
# CONFIG_SCSI_AIC79XX is not set
 +
# CONFIG_SCSI_AIC94XX is not set
 +
# CONFIG_SCSI_MVSAS is not set
 +
# CONFIG_SCSI_MVUMI is not set
 +
# CONFIG_SCSI_ARCMSR is not set
 +
# CONFIG_SCSI_ESAS2R is not set
 +
# CONFIG_MEGARAID_NEWGEN is not set
 +
# CONFIG_MEGARAID_LEGACY is not set
 +
# CONFIG_MEGARAID_SAS is not set
 +
# CONFIG_SCSI_MPT2SAS is not set
 +
# CONFIG_SCSI_MPT3SAS is not set
 +
# CONFIG_SCSI_UFSHCD is not set
 +
# CONFIG_SCSI_HPTIOP is not set
 +
# CONFIG_LIBFC is not set
 +
# CONFIG_LIBFCOE is not set
 +
# CONFIG_FCOE is not set
 +
# CONFIG_SCSI_DMX3191D is not set
 +
# CONFIG_SCSI_FUTURE_DOMAIN is not set
 +
# CONFIG_SCSI_IPS is not set
 +
# CONFIG_SCSI_INITIO is not set
 +
# CONFIG_SCSI_INIA100 is not set
 +
# CONFIG_SCSI_STEX is not set
 +
# CONFIG_SCSI_SYM53C8XX_2 is not set
 +
# CONFIG_SCSI_QLOGIC_1280 is not set
 +
# CONFIG_SCSI_QLA_FC is not set
 +
# CONFIG_SCSI_QLA_ISCSI is not set
 +
# CONFIG_SCSI_LPFC is not set
 +
# CONFIG_SCSI_DC395x is not set
 +
# CONFIG_SCSI_DC390T is not set
 +
# CONFIG_SCSI_NSP32 is not set
 +
# CONFIG_SCSI_DEBUG is not set
 +
# CONFIG_SCSI_PMCRAID is not set
 +
# CONFIG_SCSI_PM8001 is not set
 +
# CONFIG_SCSI_SRP is not set
 +
# CONFIG_SCSI_BFA_FC is not set
 +
# CONFIG_SCSI_VIRTIO is not set
 +
# CONFIG_SCSI_CHELSIO_FCOE is not set
 +
# CONFIG_SCSI_DH is not set
 +
# CONFIG_SCSI_OSD_INITIATOR is not set
 +
CONFIG_HAVE_PATA_PLATFORM=y
 +
# CONFIG_ATA is not set
 +
# CONFIG_MD is not set
 +
# CONFIG_TARGET_CORE is not set
 +
# CONFIG_FUSION is not set
 +
 +
#
 +
# IEEE 1394 (FireWire) support
 +
#
 +
# CONFIG_FIREWIRE is not set
 +
# CONFIG_FIREWIRE_NOSY is not set
 +
# CONFIG_I2O is not set
 +
CONFIG_NETDEVICES=y
 +
CONFIG_MII=y
 +
CONFIG_NET_CORE=y
 +
# CONFIG_BONDING is not set
 +
# CONFIG_DUMMY is not set
 +
# CONFIG_EQUALIZER is not set
 +
# CONFIG_NET_FC is not set
 +
# CONFIG_NET_TEAM is not set
 +
# CONFIG_MACVLAN is not set
 +
# CONFIG_VXLAN is not set
 +
# CONFIG_NETPOLL is not set
 +
# CONFIG_NET_POLL_CONTROLLER is not set
 +
# CONFIG_TUN is not set
 +
# CONFIG_VETH is not set
 +
# CONFIG_VIRTIO_NET is not set
 +
# CONFIG_NLMON is not set
 +
# CONFIG_ARCNET is not set
 +
 +
#
 +
# CAIF transport drivers
 +
#
 +
 +
#
 +
# Distributed Switch Architecture drivers
 +
#
 +
# CONFIG_NET_DSA_MV88E6XXX is not set
 +
# CONFIG_NET_DSA_MV88E6060 is not set
 +
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
 +
# CONFIG_NET_DSA_MV88E6131 is not set
 +
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
 +
CONFIG_ETHERNET=y
 +
# CONFIG_NET_VENDOR_3COM is not set
 +
# CONFIG_NET_VENDOR_ADAPTEC is not set
 +
# CONFIG_NET_VENDOR_ALTEON is not set
 +
# CONFIG_NET_VENDOR_AMD is not set
 +
CONFIG_NET_VENDOR_ARC=y
 +
# CONFIG_ARC_EMAC is not set
 +
# CONFIG_NET_VENDOR_ATHEROS is not set
 +
CONFIG_NET_CADENCE=y
 +
# CONFIG_ARM_AT91_ETHER is not set
 +
CONFIG_MACB=y
 +
CONFIG_NET_VENDOR_BROADCOM=y
 +
# CONFIG_B44 is not set
 +
# CONFIG_BNX2 is not set
 +
# CONFIG_CNIC is not set
 +
CONFIG_TIGON3=y
 +
# CONFIG_BNX2X is not set
 +
# CONFIG_NET_VENDOR_BROCADE is not set
 +
# CONFIG_NET_CALXEDA_XGMAC is not set
 +
# CONFIG_NET_VENDOR_CHELSIO is not set
 +
# CONFIG_NET_VENDOR_CIRRUS is not set
 +
# CONFIG_NET_VENDOR_CISCO is not set
 +
# CONFIG_DM9000 is not set
 +
# CONFIG_DNET is not set
 +
# CONFIG_NET_VENDOR_DEC is not set
 +
# CONFIG_NET_VENDOR_DLINK is not set
 +
# CONFIG_NET_VENDOR_EMULEX is not set
 +
# CONFIG_NET_VENDOR_EXAR is not set
 +
# CONFIG_NET_VENDOR_FARADAY is not set
 +
# CONFIG_NET_VENDOR_HP is not set
 +
CONFIG_NET_VENDOR_INTEL=y
 +
# CONFIG_E100 is not set
 +
# CONFIG_E1000 is not set
 +
CONFIG_E1000E=y
 +
# CONFIG_IGB is not set
 +
# CONFIG_IGBVF is not set
 +
# CONFIG_IXGB is not set
 +
# CONFIG_IXGBE is not set
 +
# CONFIG_IXGBEVF is not set
 +
# CONFIG_I40E is not set
 +
CONFIG_NET_VENDOR_I825XX=y
 +
# CONFIG_IP1000 is not set
 +
# CONFIG_JME is not set
 +
# CONFIG_NET_VENDOR_MARVELL is not set
 +
# CONFIG_NET_VENDOR_MELLANOX is not set
 +
# CONFIG_NET_VENDOR_MICREL is not set
 +
# CONFIG_NET_VENDOR_MICROCHIP is not set
 +
# CONFIG_NET_VENDOR_MYRI is not set
 +
# CONFIG_FEALNX is not set
 +
# CONFIG_NET_VENDOR_NATSEMI is not set
 +
# CONFIG_NET_VENDOR_NVIDIA is not set
 +
# CONFIG_NET_VENDOR_OKI is not set
 +
# CONFIG_ETHOC is not set
 +
# CONFIG_NET_PACKET_ENGINE is not set
 +
# CONFIG_NET_VENDOR_QLOGIC is not set
 +
CONFIG_NET_VENDOR_REALTEK=y
 +
# CONFIG_8139CP is not set
 +
# CONFIG_8139TOO is not set
 +
CONFIG_R8169=y
 +
# CONFIG_SH_ETH is not set
 +
# CONFIG_NET_VENDOR_RDC is not set
 +
# CONFIG_NET_VENDOR_SEEQ is not set
 +
# CONFIG_NET_VENDOR_SILAN is not set
 +
# CONFIG_NET_VENDOR_SIS is not set
 +
# CONFIG_SFC is not set
 +
# CONFIG_NET_VENDOR_SMSC is not set
 +
# CONFIG_NET_VENDOR_STMICRO is not set
 +
# CONFIG_NET_VENDOR_SUN is not set
 +
# CONFIG_NET_VENDOR_TEHUTI is not set
 +
# CONFIG_NET_VENDOR_TI is not set
 +
# CONFIG_NET_VENDOR_VIA is not set
 +
# CONFIG_NET_VENDOR_WIZNET is not set
 +
CONFIG_NET_VENDOR_XILINX=y
 +
CONFIG_XILINX_EMACLITE=y
 +
CONFIG_XILINX_AXI_EMAC=y
 +
CONFIG_XILINX_PS_EMAC=y
 +
# CONFIG_XILINX_PS_EMAC_HWTSTAMP is not set
 +
# CONFIG_FDDI is not set
 +
# CONFIG_HIPPI is not set
 +
CONFIG_PHYLIB=y
 +
 +
#
 +
# MII PHY device drivers
 +
#
 +
# CONFIG_AT803X_PHY is not set
 +
# CONFIG_AMD_PHY is not set
 +
CONFIG_MARVELL_PHY=y
 +
# CONFIG_DAVICOM_PHY is not set
 +
# CONFIG_QSEMI_PHY is not set
 +
# CONFIG_LXT_PHY is not set
 +
# CONFIG_CICADA_PHY is not set
 +
CONFIG_VITESSE_PHY=y
 +
# CONFIG_SMSC_PHY is not set
 +
# CONFIG_BROADCOM_PHY is not set
 +
# CONFIG_BCM87XX_PHY is not set
 +
# CONFIG_ICPLUS_PHY is not set
 +
# CONFIG_REALTEK_PHY is not set
 +
# CONFIG_NATIONAL_PHY is not set
 +
# CONFIG_STE10XP is not set
 +
# CONFIG_LSI_ET1011C_PHY is not set
 +
# CONFIG_MICREL_PHY is not set
 +
# CONFIG_FIXED_PHY is not set
 +
CONFIG_MDIO_BITBANG=y
 +
# CONFIG_MDIO_GPIO is not set
 +
# CONFIG_MDIO_BUS_MUX_GPIO is not set
 +
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
 +
# CONFIG_MICREL_KS8995MA is not set
 +
# CONFIG_PPP is not set
 +
# CONFIG_SLIP is not set
 +
 +
#
 +
# USB Network Adapters
 +
#
 +
CONFIG_USB_CATC=m
 +
CONFIG_USB_KAWETH=m
 +
CONFIG_USB_PEGASUS=m
 +
CONFIG_USB_RTL8150=m
 +
CONFIG_USB_RTL8152=m
 +
CONFIG_USB_USBNET=m
 +
CONFIG_USB_NET_AX8817X=m
 +
CONFIG_USB_NET_AX88179_178A=m
 +
CONFIG_USB_NET_CDCETHER=m
 +
# CONFIG_USB_NET_CDC_EEM is not set
 +
CONFIG_USB_NET_CDC_NCM=m
 +
# CONFIG_USB_NET_CDC_MBIM is not set
 +
# CONFIG_USB_NET_DM9601 is not set
 +
# CONFIG_USB_NET_SR9700 is not set
 +
# CONFIG_USB_NET_SMSC75XX is not set
 +
# CONFIG_USB_NET_SMSC95XX is not set
 +
# CONFIG_USB_NET_GL620A is not set
 +
CONFIG_USB_NET_NET1080=m
 +
# CONFIG_USB_NET_PLUSB is not set
 +
# CONFIG_USB_NET_MCS7830 is not set
 +
# CONFIG_USB_NET_RNDIS_HOST is not set
 +
CONFIG_USB_NET_CDC_SUBSET=m
 +
# CONFIG_USB_ALI_M5632 is not set
 +
# CONFIG_USB_AN2720 is not set
 +
CONFIG_USB_BELKIN=y
 +
CONFIG_USB_ARMLINUX=y
 +
# CONFIG_USB_EPSON2888 is not set
 +
# CONFIG_USB_KC2190 is not set
 +
CONFIG_USB_NET_ZAURUS=m
 +
# CONFIG_USB_NET_CX82310_ETH is not set
 +
# CONFIG_USB_NET_KALMIA is not set
 +
# CONFIG_USB_NET_QMI_WWAN is not set
 +
# CONFIG_USB_NET_INT51X1 is not set
 +
# CONFIG_USB_IPHETH is not set
 +
# CONFIG_USB_SIERRA_NET is not set
 +
# CONFIG_USB_VL600 is not set
 +
CONFIG_WLAN=y
 +
# CONFIG_ATMEL is not set
 +
# CONFIG_PRISM54 is not set
 +
# CONFIG_USB_ZD1201 is not set
 +
# CONFIG_HOSTAP is not set
 +
# CONFIG_WL_TI is not set
 +
 +
#
 +
# Enable WiMAX (Networking options) to see the WiMAX drivers
 +
#
 +
# CONFIG_WAN is not set
 +
# CONFIG_VMXNET3 is not set
 +
# CONFIG_ISDN is not set
 +
 +
#
 +
# Input device support
 +
#
 +
CONFIG_INPUT=y
 +
# CONFIG_INPUT_FF_MEMLESS is not set
 +
# CONFIG_INPUT_POLLDEV is not set
 +
CONFIG_INPUT_SPARSEKMAP=y
 +
# CONFIG_INPUT_MATRIXKMAP is not set
 +
 +
#
 +
# Userland interfaces
 +
#
 +
CONFIG_INPUT_MOUSEDEV=y
 +
CONFIG_INPUT_MOUSEDEV_PSAUX=y
 +
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 +
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 +
# CONFIG_INPUT_JOYDEV is not set
 +
CONFIG_INPUT_EVDEV=y
 +
# CONFIG_INPUT_EVBUG is not set
 +
 +
#
 +
# Input Device Drivers
 +
#
 +
CONFIG_INPUT_KEYBOARD=y
 +
# CONFIG_KEYBOARD_ADP5588 is not set
 +
# CONFIG_KEYBOARD_ADP5589 is not set
 +
CONFIG_KEYBOARD_ATKBD=y
 +
# CONFIG_KEYBOARD_QT1070 is not set
 +
# CONFIG_KEYBOARD_QT2160 is not set
 +
# CONFIG_KEYBOARD_LKKBD is not set
 +
# CONFIG_KEYBOARD_GPIO is not set
 +
# CONFIG_KEYBOARD_TCA6416 is not set
 +
# CONFIG_KEYBOARD_TCA8418 is not set
 +
# CONFIG_KEYBOARD_MATRIX is not set
 +
# CONFIG_KEYBOARD_LM8323 is not set
 +
# CONFIG_KEYBOARD_LM8333 is not set
 +
# CONFIG_KEYBOARD_MAX7359 is not set
 +
# CONFIG_KEYBOARD_MCS is not set
 +
# CONFIG_KEYBOARD_MPR121 is not set
 +
# CONFIG_KEYBOARD_NEWTON is not set
 +
# CONFIG_KEYBOARD_OPENCORES is not set
 +
# CONFIG_KEYBOARD_SAMSUNG is not set
 +
# CONFIG_KEYBOARD_STOWAWAY is not set
 +
# CONFIG_KEYBOARD_SUNKBD is not set
 +
# CONFIG_KEYBOARD_XTKBD is not set
 +
CONFIG_INPUT_MOUSE=y
 +
CONFIG_MOUSE_PS2=y
 +
CONFIG_MOUSE_PS2_ALPS=y
 +
CONFIG_MOUSE_PS2_LOGIPS2PP=y
 +
CONFIG_MOUSE_PS2_SYNAPTICS=y
 +
CONFIG_MOUSE_PS2_CYPRESS=y
 +
CONFIG_MOUSE_PS2_TRACKPOINT=y
 +
# CONFIG_MOUSE_PS2_ELANTECH is not set
 +
# CONFIG_MOUSE_PS2_SENTELIC is not set
 +
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 +
# CONFIG_MOUSE_SERIAL is not set
 +
# CONFIG_MOUSE_APPLETOUCH is not set
 +
# CONFIG_MOUSE_BCM5974 is not set
 +
# CONFIG_MOUSE_CYAPA is not set
 +
# CONFIG_MOUSE_VSXXXAA is not set
 +
# CONFIG_MOUSE_GPIO is not set
 +
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 +
# CONFIG_MOUSE_SYNAPTICS_USB is not set
 +
# CONFIG_INPUT_JOYSTICK is not set
 +
# CONFIG_INPUT_TABLET is not set
 +
# CONFIG_INPUT_TOUCHSCREEN is not set
 +
# CONFIG_INPUT_MISC is not set
 +
 +
#
 +
# Hardware I/O ports
 +
#
 +
CONFIG_SERIO=y
 +
CONFIG_SERIO_SERPORT=y
 +
# CONFIG_SERIO_AMBAKMI is not set
 +
# CONFIG_SERIO_PCIPS2 is not set
 +
CONFIG_SERIO_LIBPS2=y
 +
# CONFIG_SERIO_RAW is not set
 +
# CONFIG_SERIO_ALTERA_PS2 is not set
 +
# CONFIG_SERIO_PS2MULT is not set
 +
# CONFIG_SERIO_ARC_PS2 is not set
 +
# CONFIG_SERIO_APBPS2 is not set
 +
# CONFIG_SERIO_OLPC_APSP is not set
 +
# CONFIG_GAMEPORT is not set
 +
 +
#
 +
# Character devices
 +
#
 +
CONFIG_TTY=y
 +
CONFIG_VT=y
 +
CONFIG_CONSOLE_TRANSLATIONS=y
 +
CONFIG_VT_CONSOLE=y
 +
CONFIG_HW_CONSOLE=y
 +
CONFIG_VT_HW_CONSOLE_BINDING=y
 +
CONFIG_UNIX98_PTYS=y
 +
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 +
# CONFIG_LEGACY_PTYS is not set
 +
# CONFIG_SERIAL_NONSTANDARD is not set
 +
# CONFIG_NOZOMI is not set
 +
# CONFIG_N_GSM is not set
 +
# CONFIG_TRACE_SINK is not set
 +
# CONFIG_DEVKMEM is not set
 +
 +
#
 +
# Serial drivers
 +
#
 +
# CONFIG_SERIAL_8250 is not set
 +
 +
#
 +
# Non-8250 serial port support
 +
#
 +
# CONFIG_SERIAL_AMBA_PL010 is not set
 +
# CONFIG_SERIAL_AMBA_PL011 is not set
 +
# CONFIG_SERIAL_MAX3100 is not set
 +
# CONFIG_SERIAL_MAX310X is not set
 +
# CONFIG_SERIAL_MFD_HSU is not set
 +
# CONFIG_SERIAL_UARTLITE is not set
 +
CONFIG_SERIAL_CORE=y
 +
CONFIG_SERIAL_CORE_CONSOLE=y
 +
# CONFIG_SERIAL_JSM is not set
 +
# CONFIG_SERIAL_SCCNXP is not set
 +
# CONFIG_SERIAL_TIMBERDALE is not set
 +
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
 +
# CONFIG_SERIAL_ALTERA_UART is not set
 +
# CONFIG_SERIAL_IFX6X60 is not set
 +
# CONFIG_SERIAL_PCH_UART is not set
 +
CONFIG_SERIAL_XILINX_PS_UART=y
 +
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 +
# CONFIG_SERIAL_ARC is not set
 +
# CONFIG_SERIAL_RP2 is not set
 +
# CONFIG_SERIAL_FSL_LPUART is not set
 +
# CONFIG_SERIAL_ST_ASC is not set
 +
# CONFIG_TTY_PRINTK is not set
 +
# CONFIG_HVC_DCC is not set
 +
# CONFIG_VIRTIO_CONSOLE is not set
 +
# CONFIG_IPMI_HANDLER is not set
 +
# CONFIG_HW_RANDOM is not set
 +
CONFIG_XILINX_DEVCFG=y
 +
# CONFIG_R3964 is not set
 +
# CONFIG_APPLICOM is not set
 +
# CONFIG_RAW_DRIVER is not set
 +
# CONFIG_TCG_TPM is not set
 +
CONFIG_DEVPORT=y
 +
CONFIG_I2C=y
 +
CONFIG_I2C_BOARDINFO=y
 +
CONFIG_I2C_COMPAT=y
 +
CONFIG_I2C_CHARDEV=y
 +
CONFIG_I2C_MUX=y
 +
 +
#
 +
# Multiplexer I2C Chip support
 +
#
 +
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
 +
# CONFIG_I2C_MUX_GPIO is not set
 +
# CONFIG_I2C_MUX_PCA9541 is not set
 +
CONFIG_I2C_MUX_PCA954x=y
 +
CONFIG_I2C_HELPER_AUTO=y
 +
 +
#
 +
# I2C Hardware Bus support
 +
#
 +
 +
#
 +
# PC SMBus host controller drivers
 +
#
 +
# CONFIG_I2C_ALI1535 is not set
 +
# CONFIG_I2C_ALI1563 is not set
 +
# CONFIG_I2C_ALI15X3 is not set
 +
# CONFIG_I2C_AMD756 is not set
 +
# CONFIG_I2C_AMD8111 is not set
 +
# CONFIG_I2C_I801 is not set
 +
# CONFIG_I2C_ISCH is not set
 +
# CONFIG_I2C_PIIX4 is not set
 +
# CONFIG_I2C_NFORCE2 is not set
 +
# CONFIG_I2C_SIS5595 is not set
 +
# CONFIG_I2C_SIS630 is not set
 +
# CONFIG_I2C_SIS96X is not set
 +
# CONFIG_I2C_VIA is not set
 +
# CONFIG_I2C_VIAPRO is not set
 +
 +
#
 +
# I2C system bus drivers (mostly embedded / system-on-chip)
 +
#
 +
# CONFIG_I2C_CBUS_GPIO is not set
 +
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
 +
# CONFIG_I2C_DESIGNWARE_PCI is not set
 +
# CONFIG_I2C_EG20T is not set
 +
# CONFIG_I2C_GPIO is not set
 +
# CONFIG_I2C_NOMADIK is not set
 +
# CONFIG_I2C_OCORES is not set
 +
# CONFIG_I2C_PCA_PLATFORM is not set
 +
# CONFIG_I2C_PXA_PCI is not set
 +
# CONFIG_I2C_SIMTEC is not set
 +
# CONFIG_I2C_VERSATILE is not set
 +
CONFIG_I2C_ZYNQ=y
 +
# CONFIG_I2C_XILINX is not set
 +
 +
#
 +
# External I2C/SMBus adapter drivers
 +
#
 +
# CONFIG_I2C_DIOLAN_U2C is not set
 +
# CONFIG_I2C_PARPORT_LIGHT is not set
 +
# CONFIG_I2C_TAOS_EVM is not set
 +
# CONFIG_I2C_TINY_USB is not set
 +
 +
#
 +
# Other I2C/SMBus bus drivers
 +
#
 +
# CONFIG_I2C_STUB is not set
 +
# CONFIG_I2C_DEBUG_CORE is not set
 +
# CONFIG_I2C_DEBUG_ALGO is not set
 +
# CONFIG_I2C_DEBUG_BUS is not set
 +
CONFIG_SPI=y
 +
# CONFIG_SPI_DEBUG is not set
 +
CONFIG_SPI_MASTER=y
 +
 +
#
 +
# SPI Master Controller Drivers
 +
#
 +
# CONFIG_SPI_ALTERA is not set
 +
CONFIG_SPI_BITBANG=y
 +
# CONFIG_SPI_GPIO is not set
 +
# CONFIG_SPI_FSL_SPI is not set
 +
# CONFIG_SPI_FSL_DSPI is not set
 +
# CONFIG_SPI_OC_TINY is not set
 +
# CONFIG_SPI_PL022 is not set
 +
# CONFIG_SPI_PXA2XX is not set
 +
# CONFIG_SPI_PXA2XX_PCI is not set
 +
# CONFIG_SPI_SC18IS602 is not set
 +
# CONFIG_SPI_TOPCLIFF_PCH is not set
 +
# CONFIG_SPI_XCOMM is not set
 +
CONFIG_SPI_XILINX=y
 +
CONFIG_SPI_ZYNQ_QSPI=y
 +
# CONFIG_SPI_ZYNQ_QSPI_DUAL_STACKED is not set
 +
CONFIG_SPI_ZYNQ=y
 +
# CONFIG_SPI_DESIGNWARE is not set
 +
 +
#
 +
# SPI Protocol Masters
 +
#
 +
# CONFIG_SPI_SPIDEV is not set
 +
# CONFIG_SPI_TLE62X0 is not set
 +
# CONFIG_HSI is not set
 +
 +
#
 +
# PPS support
 +
#
 +
CONFIG_PPS=y
 +
# CONFIG_PPS_DEBUG is not set
 +
 +
#
 +
# PPS clients support
 +
#
 +
# CONFIG_PPS_CLIENT_KTIMER is not set
 +
# CONFIG_PPS_CLIENT_LDISC is not set
 +
# CONFIG_PPS_CLIENT_GPIO is not set
 +
 +
#
 +
# PPS generators support
 +
#
 +
 +
#
 +
# PTP clock support
 +
#
 +
CONFIG_PTP_1588_CLOCK=y
 +
 +
#
 +
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
 +
#
 +
CONFIG_ARCH_REQUIRE_GPIOLIB=y
 +
CONFIG_GPIO_DEVRES=y
 +
CONFIG_GPIOLIB=y
 +
CONFIG_OF_GPIO=y
 +
# CONFIG_DEBUG_GPIO is not set
 +
CONFIG_GPIO_SYSFS=y
 +
 +
#
 +
# Memory mapped GPIO drivers:
 +
#
 +
# CONFIG_GPIO_GENERIC_PLATFORM is not set
 +
# CONFIG_GPIO_EM is not set
 +
# CONFIG_GPIO_PL061 is not set
 +
# CONFIG_GPIO_RCAR is not set
 +
# CONFIG_GPIO_TS5500 is not set
 +
CONFIG_GPIO_XILINX=y
 +
CONFIG_GPIO_ZYNQ=y
 +
# CONFIG_GPIO_VX855 is not set
 +
# CONFIG_GPIO_GRGPIO is not set
 +
 +
#
 +
# I2C GPIO expanders:
 +
#
 +
# CONFIG_GPIO_MAX7300 is not set
 +
# CONFIG_GPIO_MAX732X is not set
 +
# CONFIG_GPIO_PCF857X is not set
 +
# CONFIG_GPIO_SX150X is not set
 +
# CONFIG_GPIO_ADP5588 is not set
 +
# CONFIG_GPIO_ADNP is not set
 +
 +
#
 +
# PCI GPIO expanders:
 +
#
 +
# CONFIG_GPIO_BT8XX is not set
 +
# CONFIG_GPIO_AMD8111 is not set
 +
# CONFIG_GPIO_ML_IOH is not set
 +
# CONFIG_GPIO_RDC321X is not set
 +
 +
#
 +
# SPI GPIO expanders:
 +
#
 +
# CONFIG_GPIO_MAX7301 is not set
 +
# CONFIG_GPIO_MCP23S08 is not set
 +
# CONFIG_GPIO_MC33880 is not set
 +
# CONFIG_GPIO_74X164 is not set
 +
 +
#
 +
# AC97 GPIO expanders:
 +
#
 +
 +
#
 +
# LPC GPIO expanders:
 +
#
 +
 +
#
 +
# MODULbus GPIO expanders:
 +
#
 +
 +
#
 +
# USB GPIO expanders:
 +
#
 +
# CONFIG_W1 is not set
 +
CONFIG_POWER_SUPPLY=y
 +
# CONFIG_POWER_SUPPLY_DEBUG is not set
 +
# CONFIG_PDA_POWER is not set
 +
# CONFIG_TEST_POWER is not set
 +
# CONFIG_BATTERY_DS2780 is not set
 +
# CONFIG_BATTERY_DS2781 is not set
 +
# CONFIG_BATTERY_DS2782 is not set
 +
# CONFIG_BATTERY_SBS is not set
 +
# CONFIG_BATTERY_BQ27x00 is not set
 +
# CONFIG_BATTERY_MAX17040 is not set
 +
# CONFIG_BATTERY_MAX17042 is not set
 +
# CONFIG_CHARGER_ISP1704 is not set
 +
# CONFIG_CHARGER_MAX8903 is not set
 +
# CONFIG_CHARGER_LP8727 is not set
 +
# CONFIG_CHARGER_GPIO is not set
 +
# CONFIG_CHARGER_BQ2415X is not set
 +
# CONFIG_CHARGER_BQ24190 is not set
 +
# CONFIG_CHARGER_SMB347 is not set
 +
CONFIG_POWER_RESET=y
 +
# CONFIG_POWER_RESET_GPIO is not set
 +
# CONFIG_POWER_RESET_RESTART is not set
 +
CONFIG_POWER_RESET_VEXPRESS=y
 +
# CONFIG_POWER_AVS is not set
 +
CONFIG_HWMON=y
 +
# CONFIG_HWMON_VID is not set
 +
# CONFIG_HWMON_DEBUG_CHIP is not set
 +
 +
#
 +
# Native drivers
 +
#
 +
# CONFIG_SENSORS_AD7314 is not set
 +
# CONFIG_SENSORS_AD7414 is not set
 +
# CONFIG_SENSORS_AD7418 is not set
 +
# CONFIG_SENSORS_ADCXX is not set
 +
# CONFIG_SENSORS_ADM1021 is not set
 +
# CONFIG_SENSORS_ADM1025 is not set
 +
# CONFIG_SENSORS_ADM1026 is not set
 +
# CONFIG_SENSORS_ADM1029 is not set
 +
# CONFIG_SENSORS_ADM1031 is not set
 +
# CONFIG_SENSORS_ADM9240 is not set
 +
# CONFIG_SENSORS_ADT7310 is not set
 +
# CONFIG_SENSORS_ADT7410 is not set
 +
# CONFIG_SENSORS_ADT7411 is not set
 +
# CONFIG_SENSORS_ADT7462 is not set
 +
# CONFIG_SENSORS_ADT7470 is not set
 +
# CONFIG_SENSORS_ADT7475 is not set
 +
# CONFIG_SENSORS_ASC7621 is not set
 +
# CONFIG_SENSORS_ATXP1 is not set
 +
# CONFIG_SENSORS_DS620 is not set
 +
# CONFIG_SENSORS_DS1621 is not set
 +
# CONFIG_SENSORS_I5K_AMB is not set
 +
# CONFIG_SENSORS_F71805F is not set
 +
# CONFIG_SENSORS_F71882FG is not set
 +
# CONFIG_SENSORS_F75375S is not set
 +
# CONFIG_SENSORS_G760A is not set
 +
# CONFIG_SENSORS_G762 is not set
 +
# CONFIG_SENSORS_GL518SM is not set
 +
# CONFIG_SENSORS_GL520SM is not set
 +
# CONFIG_SENSORS_GPIO_FAN is not set
 +
# CONFIG_SENSORS_HIH6130 is not set
 +
# CONFIG_SENSORS_HTU21 is not set
 +
# CONFIG_SENSORS_IT87 is not set
 +
# CONFIG_SENSORS_JC42 is not set
 +
# CONFIG_SENSORS_LINEAGE is not set
 +
# CONFIG_SENSORS_LM63 is not set
 +
# CONFIG_SENSORS_LM70 is not set
 +
# CONFIG_SENSORS_LM73 is not set
 +
# CONFIG_SENSORS_LM75 is not set
 +
# CONFIG_SENSORS_LM77 is not set
 +
# CONFIG_SENSORS_LM78 is not set
 +
# CONFIG_SENSORS_LM80 is not set
 +
# CONFIG_SENSORS_LM83 is not set
 +
# CONFIG_SENSORS_LM85 is not set
 +
# CONFIG_SENSORS_LM87 is not set
 +
# CONFIG_SENSORS_LM90 is not set
 +
# CONFIG_SENSORS_LM92 is not set
 +
# CONFIG_SENSORS_LM93 is not set
 +
# CONFIG_SENSORS_LTC4151 is not set
 +
# CONFIG_SENSORS_LTC4215 is not set
 +
# CONFIG_SENSORS_LTC4245 is not set
 +
# CONFIG_SENSORS_LTC4261 is not set
 +
# CONFIG_SENSORS_LM95234 is not set
 +
# CONFIG_SENSORS_LM95241 is not set
 +
# CONFIG_SENSORS_LM95245 is not set
 +
# CONFIG_SENSORS_MAX1111 is not set
 +
# CONFIG_SENSORS_MAX16065 is not set
 +
# CONFIG_SENSORS_MAX1619 is not set
 +
# CONFIG_SENSORS_MAX1668 is not set
 +
# CONFIG_SENSORS_MAX197 is not set
 +
# CONFIG_SENSORS_MAX6639 is not set
 +
# CONFIG_SENSORS_MAX6642 is not set
 +
# CONFIG_SENSORS_MAX6650 is not set
 +
# CONFIG_SENSORS_MAX6697 is not set
 +
# CONFIG_SENSORS_MCP3021 is not set
 +
# CONFIG_SENSORS_NCT6775 is not set
 +
# CONFIG_SENSORS_NTC_THERMISTOR is not set
 +
# CONFIG_SENSORS_PC87360 is not set
 +
# CONFIG_SENSORS_PC87427 is not set
 +
# CONFIG_SENSORS_PCF8591 is not set
 +
# CONFIG_PMBUS is not set
 +
# CONFIG_SENSORS_SHT15 is not set
 +
# CONFIG_SENSORS_SHT21 is not set
 +
# CONFIG_SENSORS_SIS5595 is not set
 +
# CONFIG_SENSORS_SMM665 is not set
 +
# CONFIG_SENSORS_DME1737 is not set
 +
# CONFIG_SENSORS_EMC1403 is not set
 +
# CONFIG_SENSORS_EMC2103 is not set
 +
# CONFIG_SENSORS_EMC6W201 is not set
 +
# CONFIG_SENSORS_SMSC47M1 is not set
 +
# CONFIG_SENSORS_SMSC47M192 is not set
 +
# CONFIG_SENSORS_SMSC47B397 is not set
 +
# CONFIG_SENSORS_SCH56XX_COMMON is not set
 +
# CONFIG_SENSORS_SCH5627 is not set
 +
# CONFIG_SENSORS_SCH5636 is not set
 +
# CONFIG_SENSORS_ADS1015 is not set
 +
# CONFIG_SENSORS_ADS7828 is not set
 +
# CONFIG_SENSORS_ADS7871 is not set
 +
# CONFIG_SENSORS_AMC6821 is not set
 +
# CONFIG_SENSORS_INA209 is not set
 +
# CONFIG_SENSORS_INA2XX is not set
 +
# CONFIG_SENSORS_THMC50 is not set
 +
# CONFIG_SENSORS_TMP102 is not set
 +
# CONFIG_SENSORS_TMP401 is not set
 +
# CONFIG_SENSORS_TMP421 is not set
 +
# CONFIG_SENSORS_VEXPRESS is not set
 +
# CONFIG_SENSORS_VIA686A is not set
 +
# CONFIG_SENSORS_VT1211 is not set
 +
# CONFIG_SENSORS_VT8231 is not set
 +
# CONFIG_SENSORS_W83781D is not set
 +
# CONFIG_SENSORS_W83791D is not set
 +
# CONFIG_SENSORS_W83792D is not set
 +
# CONFIG_SENSORS_W83793 is not set
 +
# CONFIG_SENSORS_W83795 is not set
 +
# CONFIG_SENSORS_W83L785TS is not set
 +
# CONFIG_SENSORS_W83L786NG is not set
 +
# CONFIG_SENSORS_W83627HF is not set
 +
# CONFIG_SENSORS_W83627EHF is not set
 +
CONFIG_SENSORS_XADCPS=y
 +
# CONFIG_THERMAL is not set
 +
CONFIG_WATCHDOG=y
 +
CONFIG_WATCHDOG_CORE=y
 +
# CONFIG_WATCHDOG_NOWAYOUT is not set
 +
 +
#
 +
# Watchdog Device Drivers
 +
#
 +
# CONFIG_SOFT_WATCHDOG is not set
 +
# CONFIG_ARM_SP805_WATCHDOG is not set
 +
# CONFIG_DW_WATCHDOG is not set
 +
CONFIG_ZYNQ_WATCHDOG=y
 +
# CONFIG_MAX63XX_WATCHDOG is not set
 +
# CONFIG_ALIM7101_WDT is not set
 +
# CONFIG_I6300ESB_WDT is not set
 +
CONFIG_XILINX_WATCHDOG=y
 +
# CONFIG_MEN_A21_WDT is not set
 +
 +
#
 +
# PCI-based Watchdog Cards
 +
#
 +
# CONFIG_PCIPCWATCHDOG is not set
 +
# CONFIG_WDTPCI is not set
 +
 +
#
 +
# USB-based Watchdog Cards
 +
#
 +
# CONFIG_USBPCWATCHDOG is not set
 +
CONFIG_SSB_POSSIBLE=y
 +
 +
#
 +
# Sonics Silicon Backplane
 +
#
 +
# CONFIG_SSB is not set
 +
CONFIG_BCMA_POSSIBLE=y
 +
 +
#
 +
# Broadcom specific AMBA
 +
#
 +
# CONFIG_BCMA is not set
 +
 +
#
 +
# Multifunction device drivers
 +
#
 +
# CONFIG_MFD_CORE is not set
 +
# CONFIG_MFD_AS3711 is not set
 +
# CONFIG_PMIC_ADP5520 is not set
 +
# CONFIG_MFD_AAT2870_CORE is not set
 +
# CONFIG_MFD_CROS_EC is not set
 +
# CONFIG_MFD_ASIC3 is not set
 +
# CONFIG_PMIC_DA903X is not set
 +
# CONFIG_MFD_DA9052_SPI is not set
 +
# CONFIG_MFD_DA9052_I2C is not set
 +
# CONFIG_MFD_DA9055 is not set
 +
# CONFIG_MFD_DA9063 is not set
 +
# CONFIG_MFD_MC13XXX_SPI is not set
 +
# CONFIG_MFD_MC13XXX_I2C is not set
 +
# CONFIG_HTC_EGPIO is not set
 +
# CONFIG_HTC_PASIC3 is not set
 +
# CONFIG_HTC_I2CPLD is not set
 +
# CONFIG_LPC_ICH is not set
 +
# CONFIG_LPC_SCH is not set
 +
# CONFIG_MFD_JANZ_CMODIO is not set
 +
# CONFIG_MFD_KEMPLD is not set
 +
# CONFIG_MFD_88PM800 is not set
 +
# CONFIG_MFD_88PM805 is not set
 +
# CONFIG_MFD_88PM860X is not set
 +
# CONFIG_MFD_MAX77686 is not set
 +
# CONFIG_MFD_MAX77693 is not set
 +
# CONFIG_MFD_MAX8907 is not set
 +
# CONFIG_MFD_MAX8925 is not set
 +
# CONFIG_MFD_MAX8997 is not set
 +
# CONFIG_MFD_MAX8998 is not set
 +
# CONFIG_EZX_PCAP is not set
 +
# CONFIG_MFD_VIPERBOARD is not set
 +
# CONFIG_MFD_RETU is not set
 +
# CONFIG_MFD_PCF50633 is not set
 +
# CONFIG_MFD_RDC321X is not set
 +
# CONFIG_MFD_RTSX_PCI is not set
 +
# CONFIG_MFD_RC5T583 is not set
 +
# CONFIG_MFD_SEC_CORE is not set
 +
# CONFIG_MFD_SI476X_CORE is not set
 +
# CONFIG_MFD_SM501 is not set
 +
# CONFIG_MFD_SMSC is not set
 +
# CONFIG_ABX500_CORE is not set
 +
# CONFIG_MFD_STMPE is not set
 +
# CONFIG_MFD_SYSCON is not set
 +
# CONFIG_MFD_TI_AM335X_TSCADC is not set
 +
# CONFIG_MFD_LP8788 is not set
 +
# CONFIG_MFD_PALMAS is not set
 +
# CONFIG_TPS6105X is not set
 +
# CONFIG_TPS65010 is not set
 +
# CONFIG_TPS6507X is not set
 +
# CONFIG_MFD_TPS65090 is not set
 +
# CONFIG_MFD_TPS65217 is not set
 +
# CONFIG_MFD_TPS6586X is not set
 +
# CONFIG_MFD_TPS65910 is not set
 +
# CONFIG_MFD_TPS65912 is not set
 +
# CONFIG_MFD_TPS65912_I2C is not set
 +
# CONFIG_MFD_TPS65912_SPI is not set
 +
# CONFIG_MFD_TPS80031 is not set
 +
# CONFIG_TWL4030_CORE is not set
 +
# CONFIG_TWL6040_CORE is not set
 +
# CONFIG_MFD_WL1273_CORE is not set
 +
# CONFIG_MFD_LM3533 is not set
 +
# CONFIG_MFD_TIMBERDALE is not set
 +
# CONFIG_MFD_TC3589X is not set
 +
# CONFIG_MFD_TMIO is not set
 +
# CONFIG_MFD_T7L66XB is not set
 +
# CONFIG_MFD_TC6387XB is not set
 +
# CONFIG_MFD_TC6393XB is not set
 +
# CONFIG_MFD_VX855 is not set
 +
# CONFIG_MFD_ARIZONA_I2C is not set
 +
# CONFIG_MFD_ARIZONA_SPI is not set
 +
# CONFIG_MFD_WM8400 is not set
 +
# CONFIG_MFD_WM831X_I2C is not set
 +
# CONFIG_MFD_WM831X_SPI is not set
 +
# CONFIG_MFD_WM8350_I2C is not set
 +
# CONFIG_MFD_WM8994 is not set
 +
CONFIG_VEXPRESS_CONFIG=y
 +
# CONFIG_REGULATOR is not set
 +
CONFIG_MEDIA_SUPPORT=y
 +
 +
#
 +
# Multimedia core support
 +
#
 +
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
 +
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
 +
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
 +
# CONFIG_MEDIA_RADIO_SUPPORT is not set
 +
# CONFIG_MEDIA_RC_SUPPORT is not set
 +
# CONFIG_VIDEO_ADV_DEBUG is not set
 +
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 +
# CONFIG_TTPCI_EEPROM is not set
 +
 +
#
 +
# Media drivers
 +
#
 +
# CONFIG_MEDIA_USB_SUPPORT is not set
 +
# CONFIG_MEDIA_PCI_SUPPORT is not set
 +
 +
#
 +
# Supported MMC/SDIO adapters
 +
#
 +
# CONFIG_CYPRESS_FIRMWARE is not set
 +
 +
#
 +
# Media ancillary drivers (tuners, sensors, i2c, frontends)
 +
#
 +
 +
#
 +
# Customise DVB Frontends
 +
#
 +
# CONFIG_DVB_TUNER_DIB0070 is not set
 +
# CONFIG_DVB_TUNER_DIB0090 is not set
 +
 +
#
 +
# Tools to develop new frontends
 +
#
 +
# CONFIG_DVB_DUMMY_FE is not set
 +
 +
#
 +
# Graphics support
 +
#
 +
CONFIG_VGA_ARB=y
 +
CONFIG_VGA_ARB_MAX_GPUS=16
 +
# CONFIG_DRM is not set
 +
# CONFIG_TEGRA_HOST1X is not set
 +
# CONFIG_VGASTATE is not set
 +
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 +
CONFIG_FB=y
 +
# CONFIG_FIRMWARE_EDID is not set
 +
# CONFIG_FB_DDC is not set
 +
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 +
CONFIG_FB_CFB_FILLRECT=y
 +
CONFIG_FB_CFB_COPYAREA=y
 +
CONFIG_FB_CFB_IMAGEBLIT=y
 +
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 +
# CONFIG_FB_SYS_FILLRECT is not set
 +
# CONFIG_FB_SYS_COPYAREA is not set
 +
# CONFIG_FB_SYS_IMAGEBLIT is not set
 +
# CONFIG_FB_FOREIGN_ENDIAN is not set
 +
# CONFIG_FB_SYS_FOPS is not set
 +
# CONFIG_FB_SVGALIB is not set
 +
# CONFIG_FB_MACMODES is not set
 +
# CONFIG_FB_BACKLIGHT is not set
 +
# CONFIG_FB_MODE_HELPERS is not set
 +
# CONFIG_FB_TILEBLITTING is not set
 +
 +
#
 +
# Frame buffer hardware drivers
 +
#
 +
# CONFIG_FB_CIRRUS is not set
 +
# CONFIG_FB_PM2 is not set
 +
# CONFIG_FB_ARMCLCD is not set
 +
# CONFIG_FB_CYBER2000 is not set
 +
# CONFIG_FB_ASILIANT is not set
 +
# CONFIG_FB_IMSTT is not set
 +
# CONFIG_FB_UVESA is not set
 +
# CONFIG_FB_S1D13XXX is not set
 +
# CONFIG_FB_NVIDIA is not set
 +
# CONFIG_FB_RIVA is not set
 +
# CONFIG_FB_I740 is not set
 +
# CONFIG_FB_MATROX is not set
 +
# CONFIG_FB_RADEON is not set
 +
# CONFIG_FB_ATY128 is not set
 +
# CONFIG_FB_ATY is not set
 +
# CONFIG_FB_S3 is not set
 +
# CONFIG_FB_SAVAGE is not set
 +
# CONFIG_FB_SIS is not set
 +
# CONFIG_FB_NEOMAGIC is not set
 +
# CONFIG_FB_KYRO is not set
 +
# CONFIG_FB_3DFX is not set
 +
# CONFIG_FB_VOODOO1 is not set
 +
# CONFIG_FB_VT8623 is not set
 +
# CONFIG_FB_TRIDENT is not set
 +
# CONFIG_FB_ARK is not set
 +
# CONFIG_FB_PM3 is not set
 +
# CONFIG_FB_CARMINE is not set
 +
# CONFIG_FB_SMSCUFX is not set
 +
# CONFIG_FB_UDL is not set
 +
# CONFIG_FB_XILINX is not set
 +
# CONFIG_FB_GOLDFISH is not set
 +
# CONFIG_FB_VIRTUAL is not set
 +
# CONFIG_FB_METRONOME is not set
 +
# CONFIG_FB_MB862XX is not set
 +
# CONFIG_FB_BROADSHEET is not set
 +
# CONFIG_FB_AUO_K190X is not set
 +
# CONFIG_FB_SIMPLE is not set
 +
CONFIG_FB_XYLON=y
 +
# CONFIG_FB_XYLON_PLATFORM is not set
 +
CONFIG_FB_XYLON_OF=y
 +
# CONFIG_FB_XYLON_PIXCLK is not set
 +
# CONFIG_FB_XYLON_MISC is not set
 +
# CONFIG_EXYNOS_VIDEO is not set
 +
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 +
 +
#
 +
# Console display driver support
 +
#
 +
CONFIG_DUMMY_CONSOLE=y
 +
CONFIG_FRAMEBUFFER_CONSOLE=y
 +
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 +
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 +
# CONFIG_LOGO is not set
 +
# CONFIG_FB_SSD1307 is not set
 +
# CONFIG_SOUND is not set
 +
 +
#
 +
# HID support
 +
#
 +
CONFIG_HID=y
 +
# CONFIG_HID_BATTERY_STRENGTH is not set
 +
# CONFIG_HIDRAW is not set
 +
# CONFIG_UHID is not set
 +
CONFIG_HID_GENERIC=y
 +
 +
#
 +
# Special HID drivers
 +
#
 +
# CONFIG_HID_A4TECH is not set
 +
# CONFIG_HID_ACRUX is not set
 +
# CONFIG_HID_APPLE is not set
 +
# CONFIG_HID_APPLEIR is not set
 +
# CONFIG_HID_AUREAL is not set
 +
# CONFIG_HID_BELKIN is not set
 +
# CONFIG_HID_CHERRY is not set
 +
# CONFIG_HID_CHICONY is not set
 +
# CONFIG_HID_CYPRESS is not set
 +
# CONFIG_HID_DRAGONRISE is not set
 +
# CONFIG_HID_EMS_FF is not set
 +
# CONFIG_HID_ELECOM is not set
 +
# CONFIG_HID_ELO is not set
 +
# CONFIG_HID_EZKEY is not set
 +
# CONFIG_HID_HOLTEK is not set
 +
# CONFIG_HID_HUION is not set
 +
# CONFIG_HID_KEYTOUCH is not set
 +
# CONFIG_HID_KYE is not set
 +
# CONFIG_HID_UCLOGIC is not set
 +
# CONFIG_HID_WALTOP is not set
 +
# CONFIG_HID_GYRATION is not set
 +
# CONFIG_HID_ICADE is not set
 +
# CONFIG_HID_TWINHAN is not set
 +
# CONFIG_HID_KENSINGTON is not set
 +
# CONFIG_HID_LCPOWER is not set
 +
# CONFIG_HID_LENOVO_TPKBD is not set
 +
# CONFIG_HID_LOGITECH is not set
 +
# CONFIG_HID_MAGICMOUSE is not set
 +
CONFIG_HID_MICROSOFT=y
 +
# CONFIG_HID_MONTEREY is not set
 +
# CONFIG_HID_MULTITOUCH is not set
 +
# CONFIG_HID_NTRIG is not set
 +
# CONFIG_HID_ORTEK is not set
 +
# CONFIG_HID_PANTHERLORD is not set
 +
# CONFIG_HID_PETALYNX is not set
 +
# CONFIG_HID_PICOLCD is not set
 +
# CONFIG_HID_PRIMAX is not set
 +
# CONFIG_HID_ROCCAT is not set
 +
# CONFIG_HID_SAITEK is not set
 +
# CONFIG_HID_SAMSUNG is not set
 +
# CONFIG_HID_SONY is not set
 +
# CONFIG_HID_SPEEDLINK is not set
 +
# CONFIG_HID_STEELSERIES is not set
 +
# CONFIG_HID_SUNPLUS is not set
 +
# CONFIG_HID_GREENASIA is not set
 +
# CONFIG_HID_SMARTJOYPLUS is not set
 +
# CONFIG_HID_TIVO is not set
 +
# CONFIG_HID_TOPSEED is not set
 +
# CONFIG_HID_THINGM is not set
 +
# CONFIG_HID_THRUSTMASTER is not set
 +
# CONFIG_HID_WACOM is not set
 +
# CONFIG_HID_WIIMOTE is not set
 +
# CONFIG_HID_XINMO is not set
 +
# CONFIG_HID_ZEROPLUS is not set
 +
# CONFIG_HID_ZYDACRON is not set
 +
# CONFIG_HID_SENSOR_HUB is not set
 +
 +
#
 +
# USB HID support
 +
#
 +
CONFIG_USB_HID=y
 +
# CONFIG_HID_PID is not set
 +
# CONFIG_USB_HIDDEV is not set
 +
 +
#
 +
# I2C HID support
 +
#
 +
# CONFIG_I2C_HID is not set
 +
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 +
CONFIG_USB_SUPPORT=y
 +
CONFIG_USB_COMMON=y
 +
CONFIG_USB_ARCH_HAS_HCD=y
 +
CONFIG_USB=y
 +
# CONFIG_USB_DEBUG is not set
 +
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 +
 +
#
 +
# Miscellaneous USB options
 +
#
 +
CONFIG_USB_DEFAULT_PERSIST=y
 +
# CONFIG_USB_DYNAMIC_MINORS is not set
 +
# CONFIG_USB_OTG_WHITELIST is not set
 +
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 +
# CONFIG_USB_MON is not set
 +
# CONFIG_USB_WUSB_CBAF is not set
 +
 +
#
 +
# USB Host Controller Drivers
 +
#
 +
# CONFIG_USB_C67X00_HCD is not set
 +
# CONFIG_USB_XHCI_HCD is not set
 +
CONFIG_USB_EHCI_HCD=y
 +
CONFIG_USB_EHCI_ROOT_HUB_TT=y
 +
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 +
CONFIG_USB_EHCI_PCI=y
 +
CONFIG_USB_XUSBPS_DR_OF=y
 +
CONFIG_USB_EHCI_XUSBPS=y
 +
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
 +
# CONFIG_USB_OXU210HP_HCD is not set
 +
# CONFIG_USB_ISP116X_HCD is not set
 +
# CONFIG_USB_ISP1760_HCD is not set
 +
# CONFIG_USB_ISP1362_HCD is not set
 +
# CONFIG_USB_FUSBH200_HCD is not set
 +
# CONFIG_USB_FOTG210_HCD is not set
 +
# CONFIG_USB_OHCI_HCD is not set
 +
# CONFIG_USB_UHCI_HCD is not set
 +
# CONFIG_USB_SL811_HCD is not set
 +
# CONFIG_USB_R8A66597_HCD is not set
 +
# CONFIG_USB_HCD_TEST_MODE is not set
 +
# CONFIG_USB_MUSB_HDRC is not set
 +
# CONFIG_USB_RENESAS_USBHS is not set
 +
 +
#
 +
# USB Device Class drivers
 +
#
 +
# CONFIG_USB_ACM is not set
 +
# CONFIG_USB_PRINTER is not set
 +
# CONFIG_USB_WDM is not set
 +
# CONFIG_USB_TMC is not set
 +
 +
#
 +
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 +
#
 +
 +
#
 +
# also be needed; see USB_STORAGE Help for more info
 +
#
 +
CONFIG_USB_STORAGE=y
 +
# CONFIG_USB_STORAGE_DEBUG is not set
 +
# CONFIG_USB_STORAGE_REALTEK is not set
 +
# CONFIG_USB_STORAGE_DATAFAB is not set
 +
# CONFIG_USB_STORAGE_FREECOM is not set
 +
# CONFIG_USB_STORAGE_ISD200 is not set
 +
# CONFIG_USB_STORAGE_USBAT is not set
 +
# CONFIG_USB_STORAGE_SDDR09 is not set
 +
# CONFIG_USB_STORAGE_SDDR55 is not set
 +
# CONFIG_USB_STORAGE_JUMPSHOT is not set
 +
# CONFIG_USB_STORAGE_ALAUDA is not set
 +
# CONFIG_USB_STORAGE_ONETOUCH is not set
 +
# CONFIG_USB_STORAGE_KARMA is not set
 +
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 +
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
 +
 +
#
 +
# USB Imaging devices
 +
#
 +
# CONFIG_USB_MDC800 is not set
 +
# CONFIG_USB_MICROTEK is not set
 +
# CONFIG_USB_DWC3 is not set
 +
# CONFIG_USB_CHIPIDEA is not set
 +
 +
#
 +
# USB port drivers
 +
#
 +
# CONFIG_USB_SERIAL is not set
 +
 +
#
 +
# USB Miscellaneous drivers
 +
#
 +
# CONFIG_USB_EMI62 is not set
 +
# CONFIG_USB_EMI26 is not set
 +
# CONFIG_USB_ADUTUX is not set
 +
# CONFIG_USB_SEVSEG is not set
 +
# CONFIG_USB_RIO500 is not set
 +
# CONFIG_USB_LEGOTOWER is not set
 +
# CONFIG_USB_LCD is not set
 +
# CONFIG_USB_LED is not set
 +
# CONFIG_USB_CYPRESS_CY7C63 is not set
 +
# CONFIG_USB_CYTHERM is not set
 +
# CONFIG_USB_IDMOUSE is not set
 +
# CONFIG_USB_FTDI_ELAN is not set
 +
# CONFIG_USB_APPLEDISPLAY is not set
 +
# CONFIG_USB_SISUSBVGA is not set
 +
# CONFIG_USB_LD is not set
 +
# CONFIG_USB_TRANCEVIBRATOR is not set
 +
# CONFIG_USB_IOWARRIOR is not set
 +
# CONFIG_USB_TEST is not set
 +
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
 +
# CONFIG_USB_ISIGHTFW is not set
 +
# CONFIG_USB_YUREX is not set
 +
# CONFIG_USB_EZUSB_FX2 is not set
 +
# CONFIG_USB_HSIC_USB3503 is not set
 +
 +
#
 +
# USB Physical Layer drivers
 +
#
 +
CONFIG_USB_PHY=y
 +
# CONFIG_NOP_USB_XCEIV is not set
 +
# CONFIG_AM335X_PHY_USB is not set
 +
# CONFIG_SAMSUNG_USB2PHY is not set
 +
# CONFIG_SAMSUNG_USB3PHY is not set
 +
# CONFIG_USB_GPIO_VBUS is not set
 +
# CONFIG_USB_ISP1301 is not set
 +
# CONFIG_USB_RCAR_PHY is not set
 +
CONFIG_USB_ULPI=y
 +
CONFIG_USB_ULPI_VIEWPORT=y
 +
CONFIG_USB_GADGET=y
 +
# CONFIG_USB_GADGET_DEBUG is not set
 +
# CONFIG_USB_GADGET_DEBUG_FILES is not set
 +
# CONFIG_USB_GADGET_DEBUG_FS is not set
 +
CONFIG_USB_GADGET_VBUS_DRAW=2
 +
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 +
 +
#
 +
# USB Peripheral Controller
 +
#
 +
CONFIG_USB_GADGET_XUSBPS=y
 +
CONFIG_XUSBPS_ERRATA_DT654401=y
 +
CONFIG_USB_XUSBPS=y
 +
# CONFIG_USB_FUSB300 is not set
 +
# CONFIG_USB_FOTG210_UDC is not set
 +
# CONFIG_USB_R8A66597 is not set
 +
CONFIG_USB_GADGET_XILINX=y
 +
# CONFIG_USB_PXA27X is not set
 +
# CONFIG_USB_MV_UDC is not set
 +
# CONFIG_USB_MV_U3D is not set
 +
# CONFIG_USB_M66592 is not set
 +
# CONFIG_USB_AMD5536UDC is not set
 +
# CONFIG_USB_NET2272 is not set
 +
# CONFIG_USB_NET2280 is not set
 +
# CONFIG_USB_GOKU is not set
 +
# CONFIG_USB_EG20T is not set
 +
# CONFIG_USB_DUMMY_HCD is not set
 +
CONFIG_USB_LIBCOMPOSITE=y
 +
CONFIG_USB_U_ETHER=y
 +
CONFIG_USB_U_RNDIS=y
 +
CONFIG_USB_F_ECM=y
 +
CONFIG_USB_F_SUBSET=y
 +
CONFIG_USB_F_RNDIS=y
 +
# CONFIG_USB_CONFIGFS is not set
 +
# CONFIG_USB_ZERO is not set
 +
CONFIG_USB_ETH=y
 +
CONFIG_USB_ETH_RNDIS=y
 +
# CONFIG_USB_ETH_EEM is not set
 +
# CONFIG_USB_G_NCM is not set
 +
# CONFIG_USB_GADGETFS is not set
 +
# CONFIG_USB_FUNCTIONFS is not set
 +
# CONFIG_USB_MASS_STORAGE is not set
 +
# CONFIG_USB_G_SERIAL is not set
 +
# CONFIG_USB_G_PRINTER is not set
 +
# CONFIG_USB_CDC_COMPOSITE is not set
 +
# CONFIG_USB_G_ACM_MS is not set
 +
# CONFIG_USB_G_MULTI is not set
 +
# CONFIG_USB_G_HID is not set
 +
# CONFIG_USB_G_DBGP is not set
 +
# CONFIG_UWB is not set
 +
CONFIG_MMC=y
 +
# CONFIG_MMC_DEBUG is not set
 +
# CONFIG_MMC_UNSAFE_RESUME is not set
 +
# CONFIG_MMC_CLKGATE is not set
 +
 +
#
 +
# MMC/SD/SDIO Card Drivers
 +
#
 +
CONFIG_MMC_BLOCK=y
 +
CONFIG_MMC_BLOCK_MINORS=8
 +
CONFIG_MMC_BLOCK_BOUNCE=y
 +
# CONFIG_SDIO_UART is not set
 +
# CONFIG_MMC_TEST is not set
 +
 +
#
 +
# MMC/SD/SDIO Host Controller Drivers
 +
#
 +
# CONFIG_MMC_ARMMMCI is not set
 +
CONFIG_MMC_SDHCI=y
 +
# CONFIG_MMC_SDHCI_PCI is not set
 +
CONFIG_MMC_SDHCI_PLTFM=y
 +
CONFIG_MMC_SDHCI_OF_ARASAN=y
 +
# CONFIG_MMC_SDHCI_PXAV3 is not set
 +
# CONFIG_MMC_SDHCI_PXAV2 is not set
 +
# CONFIG_MMC_TIFM_SD is not set
 +
# CONFIG_MMC_CB710 is not set
 +
# CONFIG_MMC_VIA_SDMMC is not set
 +
# CONFIG_MMC_DW is not set
 +
# CONFIG_MMC_VUB300 is not set
 +
# CONFIG_MMC_USHC is not set
 +
# CONFIG_MEMSTICK is not set
 +
CONFIG_NEW_LEDS=y
 +
CONFIG_LEDS_CLASS=m
 +
 +
#
 +
# LED drivers
 +
#
 +
# CONFIG_LEDS_LM3530 is not set
 +
# CONFIG_LEDS_LM3642 is not set
 +
# CONFIG_LEDS_PCA9532 is not set
 +
CONFIG_LEDS_GPIO=m
 +
# CONFIG_LEDS_LP3944 is not set
 +
# CONFIG_LEDS_LP5521 is not set
 +
# CONFIG_LEDS_LP5523 is not set
 +
# CONFIG_LEDS_LP5562 is not set
 +
# CONFIG_LEDS_LP8501 is not set
 +
# CONFIG_LEDS_PCA955X is not set
 +
# CONFIG_LEDS_PCA963X is not set
 +
# CONFIG_LEDS_DAC124S085 is not set
 +
# CONFIG_LEDS_BD2802 is not set
 +
# CONFIG_LEDS_LT3593 is not set
 +
# CONFIG_LEDS_TCA6507 is not set
 +
# CONFIG_LEDS_LM355x is not set
 +
# CONFIG_LEDS_OT200 is not set
 +
# CONFIG_LEDS_BLINKM is not set
 +
 +
#
 +
# LED Triggers
 +
#
 +
CONFIG_LEDS_TRIGGERS=y
 +
# CONFIG_LEDS_TRIGGER_TIMER is not set
 +
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
 +
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 +
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 +
# CONFIG_LEDS_TRIGGER_GPIO is not set
 +
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 +
 +
#
 +
# iptables trigger is under Netfilter config (LED target)
 +
#
 +
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
 +
# CONFIG_LEDS_TRIGGER_CAMERA is not set
 +
# CONFIG_ACCESSIBILITY is not set
 +
# CONFIG_INFINIBAND is not set
 +
CONFIG_EDAC=y
 +
CONFIG_EDAC_LEGACY_SYSFS=y
 +
# CONFIG_EDAC_DEBUG is not set
 +
CONFIG_EDAC_MM_EDAC=y
 +
CONFIG_EDAC_ZYNQ=y
 +
CONFIG_RTC_LIB=y
 +
CONFIG_RTC_CLASS=y
 +
CONFIG_RTC_HCTOSYS=y
 +
CONFIG_RTC_SYSTOHC=y
 +
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 +
# CONFIG_RTC_DEBUG is not set
 +
 +
#
 +
# RTC interfaces
 +
#
 +
CONFIG_RTC_INTF_SYSFS=y
 +
CONFIG_RTC_INTF_PROC=y
 +
CONFIG_RTC_INTF_DEV=y
 +
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 +
# CONFIG_RTC_DRV_TEST is not set
 +
 +
#
 +
# I2C RTC drivers
 +
#
 +
# CONFIG_RTC_DRV_DS1307 is not set
 +
# CONFIG_RTC_DRV_DS1374 is not set
 +
# CONFIG_RTC_DRV_DS1672 is not set
 +
# CONFIG_RTC_DRV_DS3232 is not set
 +
# CONFIG_RTC_DRV_MAX6900 is not set
 +
# CONFIG_RTC_DRV_RS5C372 is not set
 +
# CONFIG_RTC_DRV_ISL1208 is not set
 +
# CONFIG_RTC_DRV_ISL12022 is not set
 +
# CONFIG_RTC_DRV_X1205 is not set
 +
# CONFIG_RTC_DRV_PCF2127 is not set
 +
# CONFIG_RTC_DRV_PCF8523 is not set
 +
CONFIG_RTC_DRV_PCF8563=y
 +
# CONFIG_RTC_DRV_PCF8583 is not set
 +
# CONFIG_RTC_DRV_M41T80 is not set
 +
# CONFIG_RTC_DRV_BQ32K is not set
 +
# CONFIG_RTC_DRV_S35390A is not set
 +
# CONFIG_RTC_DRV_FM3130 is not set
 +
# CONFIG_RTC_DRV_RX8581 is not set
 +
# CONFIG_RTC_DRV_RX8025 is not set
 +
# CONFIG_RTC_DRV_EM3027 is not set
 +
# CONFIG_RTC_DRV_RV3029C2 is not set
 +
 +
#
 +
# SPI RTC drivers
 +
#
 +
# CONFIG_RTC_DRV_M41T93 is not set
 +
# CONFIG_RTC_DRV_M41T94 is not set
 +
# CONFIG_RTC_DRV_DS1305 is not set
 +
# CONFIG_RTC_DRV_DS1390 is not set
 +
# CONFIG_RTC_DRV_MAX6902 is not set
 +
# CONFIG_RTC_DRV_R9701 is not set
 +
# CONFIG_RTC_DRV_RS5C348 is not set
 +
# CONFIG_RTC_DRV_DS3234 is not set
 +
# CONFIG_RTC_DRV_PCF2123 is not set
 +
# CONFIG_RTC_DRV_RX4581 is not set
 +
 +
#
 +
# Platform RTC drivers
 +
#
 +
# CONFIG_RTC_DRV_CMOS is not set
 +
# CONFIG_RTC_DRV_DS1286 is not set
 +
# CONFIG_RTC_DRV_DS1511 is not set
 +
# CONFIG_RTC_DRV_DS1553 is not set
 +
# CONFIG_RTC_DRV_DS1742 is not set
 +
# CONFIG_RTC_DRV_STK17TA8 is not set
 +
# CONFIG_RTC_DRV_M48T86 is not set
 +
# CONFIG_RTC_DRV_M48T35 is not set
 +
# CONFIG_RTC_DRV_M48T59 is not set
 +
# CONFIG_RTC_DRV_MSM6242 is not set
 +
# CONFIG_RTC_DRV_BQ4802 is not set
 +
# CONFIG_RTC_DRV_RP5C01 is not set
 +
# CONFIG_RTC_DRV_V3020 is not set
 +
# CONFIG_RTC_DRV_DS2404 is not set
 +
 +
#
 +
# on-CPU RTC drivers
 +
#
 +
# CONFIG_RTC_DRV_PL030 is not set
 +
# CONFIG_RTC_DRV_PL031 is not set
 +
# CONFIG_RTC_DRV_SNVS is not set
 +
# CONFIG_RTC_DRV_MOXART is not set
 +
 +
#
 +
# HID Sensor RTC drivers
 +
#
 +
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
 +
CONFIG_DMADEVICES=y
 +
# CONFIG_DMADEVICES_DEBUG is not set
 +
 +
#
 +
# DMA Devices
 +
#
 +
CONFIG_XILINX_DMA_ENGINES=y
 +
CONFIG_XILINX_AXIDMA=y
 +
# CONFIG_XILINX_DMATEST is not set
 +
CONFIG_XILINX_AXIVDMA=y
 +
# CONFIG_XILINX_VDMATEST is not set
 +
CONFIG_XILINX_AXICDMA=y
 +
# CONFIG_XILINX_CDMATEST is not set
 +
# CONFIG_AMBA_PL08X is not set
 +
# CONFIG_DW_DMAC_CORE is not set
 +
# CONFIG_DW_DMAC is not set
 +
# CONFIG_DW_DMAC_PCI is not set
 +
# CONFIG_TIMB_DMA is not set
 +
CONFIG_PL330_DMA=y
 +
CONFIG_DMA_ENGINE=y
 +
CONFIG_DMA_OF=y
 +
 +
#
 +
# DMA Clients
 +
#
 +
# CONFIG_ASYNC_TX_DMA is not set
 +
# CONFIG_DMATEST is not set
 +
# CONFIG_AUXDISPLAY is not set
 +
CONFIG_UIO=y
 +
# CONFIG_UIO_CIF is not set
 +
CONFIG_UIO_PDRV_GENIRQ=y
 +
# CONFIG_UIO_DMEM_GENIRQ is not set
 +
# CONFIG_UIO_AEC is not set
 +
# CONFIG_UIO_SERCOS3 is not set
 +
# CONFIG_UIO_PCI_GENERIC is not set
 +
# CONFIG_UIO_NETX is not set
 +
# CONFIG_UIO_MF624 is not set
 +
CONFIG_UIO_XILINX_APM=y
 +
# CONFIG_VIRT_DRIVERS is not set
 +
CONFIG_VIRTIO=y
 +
 +
#
 +
# Virtio drivers
 +
#
 +
# CONFIG_VIRTIO_PCI is not set
 +
# CONFIG_VIRTIO_BALLOON is not set
 +
# CONFIG_VIRTIO_MMIO is not set
 +
 +
#
 +
# Microsoft Hyper-V guest support
 +
#
 +
# CONFIG_STAGING is not set
 +
CONFIG_CLKDEV_LOOKUP=y
 +
CONFIG_HAVE_CLK_PREPARE=y
 +
CONFIG_COMMON_CLK=y
 +
 +
#
 +
# Common Clock Framework
 +
#
 +
CONFIG_COMMON_CLK_DEBUG=y
 +
CONFIG_COMMON_CLK_VERSATILE=y
 +
# CONFIG_COMMON_CLK_SI5351 is not set
 +
CONFIG_COMMON_CLK_SI570=y
 +
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
 +
 +
#
 +
# Hardware Spinlock drivers
 +
#
 +
CONFIG_CLKSRC_OF=y
 +
CONFIG_CLKSRC_MMIO=y
 +
CONFIG_CADENCE_TTC_TIMER=y
 +
# CONFIG_MAILBOX is not set
 +
CONFIG_IOMMU_SUPPORT=y
 +
CONFIG_OF_IOMMU=y
 +
 +
#
 +
# Remoteproc drivers
 +
#
 +
CONFIG_REMOTEPROC=y
 +
# CONFIG_STE_MODEM_RPROC is not set
 +
CONFIG_ZYNQ_REMOTEPROC=y
 +
CONFIG_MB_REMOTEPROC=y
 +
 +
#
 +
# Rpmsg drivers
 +
#
 +
CONFIG_RPMSG=y
 +
# CONFIG_RPMSG_SERVER_SAMPLE is not set
 +
# CONFIG_RPMSG_OMX is not set
 +
# CONFIG_RPMSG_FREERTOS_STAT is not set
 +
# CONFIG_PM_DEVFREQ is not set
 +
# CONFIG_EXTCON is not set
 +
CONFIG_MEMORY=y
 +
CONFIG_ZYNQ_SMC=y
 +
# CONFIG_IIO is not set
 +
# CONFIG_VME_BUS is not set
 +
# CONFIG_PWM is not set
 +
CONFIG_IRQCHIP=y
 +
CONFIG_ARM_GIC=y
 +
# CONFIG_IPACK_BUS is not set
 +
# CONFIG_RESET_CONTROLLER is not set
 +
# CONFIG_FMC is not set
 +
 +
#
 +
# File systems
 +
#
 +
CONFIG_DCACHE_WORD_ACCESS=y
 +
CONFIG_EXT2_FS=y
 +
# CONFIG_EXT2_FS_XATTR is not set
 +
# CONFIG_EXT2_FS_XIP is not set
 +
CONFIG_EXT3_FS=y
 +
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 +
CONFIG_EXT3_FS_XATTR=y
 +
# CONFIG_EXT3_FS_POSIX_ACL is not set
 +
# CONFIG_EXT3_FS_SECURITY is not set
 +
CONFIG_EXT4_FS=y
 +
# CONFIG_EXT4_FS_POSIX_ACL is not set
 +
# CONFIG_EXT4_FS_SECURITY is not set
 +
# CONFIG_EXT4_DEBUG is not set
 +
CONFIG_JBD=y
 +
# CONFIG_JBD_DEBUG is not set
 +
CONFIG_JBD2=y
 +
# CONFIG_JBD2_DEBUG is not set
 +
CONFIG_FS_MBCACHE=y
 +
# CONFIG_REISERFS_FS is not set
 +
# CONFIG_JFS_FS is not set
 +
# CONFIG_XFS_FS is not set
 +
# CONFIG_GFS2_FS is not set
 +
# CONFIG_OCFS2_FS is not set
 +
# CONFIG_BTRFS_FS is not set
 +
# CONFIG_NILFS2_FS is not set
 +
# CONFIG_FS_POSIX_ACL is not set
 +
CONFIG_FILE_LOCKING=y
 +
CONFIG_FSNOTIFY=y
 +
# CONFIG_DNOTIFY is not set
 +
CONFIG_INOTIFY_USER=y
 +
# CONFIG_FANOTIFY is not set
 +
# CONFIG_QUOTA is not set
 +
# CONFIG_QUOTACTL is not set
 +
# CONFIG_AUTOFS4_FS is not set
 +
# CONFIG_FUSE_FS is not set
 +
 +
#
 +
# Caches
 +
#
 +
# CONFIG_FSCACHE is not set
 +
 +
#
 +
# CD-ROM/DVD Filesystems
 +
#
 +
# CONFIG_ISO9660_FS is not set
 +
# CONFIG_UDF_FS is not set
 +
 +
#
 +
# DOS/FAT/NT Filesystems
 +
#
 +
CONFIG_FAT_FS=y
 +
CONFIG_MSDOS_FS=y
 +
CONFIG_VFAT_FS=y
 +
CONFIG_FAT_DEFAULT_CODEPAGE=437
 +
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 +
# CONFIG_NTFS_FS is not set
 +
 +
#
 +
# Pseudo filesystems
 +
#
 +
CONFIG_PROC_FS=y
 +
CONFIG_PROC_SYSCTL=y
 +
CONFIG_PROC_PAGE_MONITOR=y
 +
CONFIG_SYSFS=y
 +
CONFIG_TMPFS=y
 +
# CONFIG_TMPFS_POSIX_ACL is not set
 +
# CONFIG_TMPFS_XATTR is not set
 +
# CONFIG_HUGETLB_PAGE is not set
 +
CONFIG_CONFIGFS_FS=y
 +
CONFIG_MISC_FILESYSTEMS=y
 +
# CONFIG_ADFS_FS is not set
 +
# CONFIG_AFFS_FS is not set
 +
# CONFIG_HFS_FS is not set
 +
# CONFIG_HFSPLUS_FS is not set
 +
# CONFIG_BEFS_FS is not set
 +
# CONFIG_BFS_FS is not set
 +
# CONFIG_EFS_FS is not set
 +
CONFIG_JFFS2_FS=y
 +
CONFIG_JFFS2_FS_DEBUG=0
 +
CONFIG_JFFS2_FS_WRITEBUFFER=y
 +
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 +
CONFIG_JFFS2_SUMMARY=y
 +
# CONFIG_JFFS2_FS_XATTR is not set
 +
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 +
CONFIG_JFFS2_ZLIB=y
 +
# CONFIG_JFFS2_LZO is not set
 +
CONFIG_JFFS2_RTIME=y
 +
# CONFIG_JFFS2_RUBIN is not set
 +
# CONFIG_LOGFS is not set
 +
# CONFIG_CRAMFS is not set
 +
# CONFIG_SQUASHFS is not set
 +
# CONFIG_VXFS_FS is not set
 +
# CONFIG_MINIX_FS is not set
 +
# CONFIG_OMFS_FS is not set
 +
# CONFIG_HPFS_FS is not set
 +
# CONFIG_QNX4FS_FS is not set
 +
# CONFIG_QNX6FS_FS is not set
 +
# CONFIG_ROMFS_FS is not set
 +
# CONFIG_PSTORE is not set
 +
# CONFIG_SYSV_FS is not set
 +
# CONFIG_UFS_FS is not set
 +
# CONFIG_F2FS_FS is not set
 +
CONFIG_NETWORK_FILESYSTEMS=y
 +
CONFIG_NFS_FS=y
 +
CONFIG_NFS_V2=y
 +
CONFIG_NFS_V3=y
 +
# CONFIG_NFS_V3_ACL is not set
 +
# CONFIG_NFS_V4 is not set
 +
# CONFIG_NFS_SWAP is not set
 +
CONFIG_ROOT_NFS=y
 +
# CONFIG_NFSD is not set
 +
CONFIG_LOCKD=y
 +
CONFIG_LOCKD_V4=y
 +
CONFIG_NFS_COMMON=y
 +
CONFIG_SUNRPC=y
 +
# CONFIG_SUNRPC_DEBUG is not set
 +
# CONFIG_CEPH_FS is not set
 +
# CONFIG_CIFS is not set
 +
# CONFIG_NCP_FS is not set
 +
# CONFIG_CODA_FS is not set
 +
# CONFIG_AFS_FS is not set
 +
CONFIG_NLS=y
 +
CONFIG_NLS_DEFAULT="iso8859-1"
 +
CONFIG_NLS_CODEPAGE_437=y
 +
# CONFIG_NLS_CODEPAGE_737 is not set
 +
# CONFIG_NLS_CODEPAGE_775 is not set
 +
# CONFIG_NLS_CODEPAGE_850 is not set
 +
# CONFIG_NLS_CODEPAGE_852 is not set
 +
# CONFIG_NLS_CODEPAGE_855 is not set
 +
# CONFIG_NLS_CODEPAGE_857 is not set
 +
# CONFIG_NLS_CODEPAGE_860 is not set
 +
# CONFIG_NLS_CODEPAGE_861 is not set
 +
# CONFIG_NLS_CODEPAGE_862 is not set
 +
# CONFIG_NLS_CODEPAGE_863 is not set
 +
# CONFIG_NLS_CODEPAGE_864 is not set
 +
# CONFIG_NLS_CODEPAGE_865 is not set
 +
# CONFIG_NLS_CODEPAGE_866 is not set
 +
# CONFIG_NLS_CODEPAGE_869 is not set
 +
# CONFIG_NLS_CODEPAGE_936 is not set
 +
# CONFIG_NLS_CODEPAGE_950 is not set
 +
# CONFIG_NLS_CODEPAGE_932 is not set
 +
# CONFIG_NLS_CODEPAGE_949 is not set
 +
# CONFIG_NLS_CODEPAGE_874 is not set
 +
# CONFIG_NLS_ISO8859_8 is not set
 +
# CONFIG_NLS_CODEPAGE_1250 is not set
 +
# CONFIG_NLS_CODEPAGE_1251 is not set
 +
CONFIG_NLS_ASCII=y
 +
CONFIG_NLS_ISO8859_1=y
 +
# CONFIG_NLS_ISO8859_2 is not set
 +
# CONFIG_NLS_ISO8859_3 is not set
 +
# CONFIG_NLS_ISO8859_4 is not set
 +
# CONFIG_NLS_ISO8859_5 is not set
 +
# CONFIG_NLS_ISO8859_6 is not set
 +
# CONFIG_NLS_ISO8859_7 is not set
 +
# CONFIG_NLS_ISO8859_9 is not set
 +
# CONFIG_NLS_ISO8859_13 is not set
 +
# CONFIG_NLS_ISO8859_14 is not set
 +
# CONFIG_NLS_ISO8859_15 is not set
 +
# CONFIG_NLS_KOI8_R is not set
 +
# CONFIG_NLS_KOI8_U is not set
 +
# CONFIG_NLS_MAC_ROMAN is not set
 +
# CONFIG_NLS_MAC_CELTIC is not set
 +
# CONFIG_NLS_MAC_CENTEURO is not set
 +
# CONFIG_NLS_MAC_CROATIAN is not set
 +
# CONFIG_NLS_MAC_CYRILLIC is not set
 +
# CONFIG_NLS_MAC_GAELIC is not set
 +
# CONFIG_NLS_MAC_GREEK is not set
 +
# CONFIG_NLS_MAC_ICELAND is not set
 +
# CONFIG_NLS_MAC_INUIT is not set
 +
# CONFIG_NLS_MAC_ROMANIAN is not set
 +
# CONFIG_NLS_MAC_TURKISH is not set
 +
# CONFIG_NLS_UTF8 is not set
 +
# CONFIG_DLM is not set
 +
 +
#
 +
# Kernel hacking
 +
#
 +
 +
#
 +
# printk and dmesg options
 +
#
 +
CONFIG_PRINTK_TIME=y
 +
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
 +
# CONFIG_BOOT_PRINTK_DELAY is not set
 +
CONFIG_DYNAMIC_DEBUG=y
 +
 +
#
 +
# Compile-time checks and compiler options
 +
#
 +
# CONFIG_DEBUG_INFO is not set
 +
# CONFIG_ENABLE_WARN_DEPRECATED is not set
 +
# CONFIG_ENABLE_MUST_CHECK is not set
 +
CONFIG_FRAME_WARN=1024
 +
# CONFIG_STRIP_ASM_SYMS is not set
 +
# CONFIG_READABLE_ASM is not set
 +
# CONFIG_UNUSED_SYMBOLS is not set
 +
CONFIG_DEBUG_FS=y
 +
# CONFIG_HEADERS_CHECK is not set
 +
# CONFIG_DEBUG_SECTION_MISMATCH is not set
 +
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 +
CONFIG_MAGIC_SYSRQ=y
 +
CONFIG_DEBUG_KERNEL=y
 +
 +
#
 +
# Memory Debugging
 +
#
 +
# CONFIG_DEBUG_PAGEALLOC is not set
 +
# CONFIG_DEBUG_OBJECTS is not set
 +
# CONFIG_SLUB_DEBUG_ON is not set
 +
# CONFIG_SLUB_STATS is not set
 +
CONFIG_HAVE_DEBUG_KMEMLEAK=y
 +
# CONFIG_DEBUG_KMEMLEAK is not set
 +
# CONFIG_DEBUG_STACK_USAGE is not set
 +
# CONFIG_DEBUG_VM is not set
 +
# CONFIG_DEBUG_MEMORY_INIT is not set
 +
# CONFIG_DEBUG_PER_CPU_MAPS is not set
 +
# CONFIG_DEBUG_HIGHMEM is not set
 +
 +
#
 +
# Debug Lockups and Hangs
 +
#
 +
CONFIG_LOCKUP_DETECTOR=y
 +
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 +
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 +
CONFIG_DETECT_HUNG_TASK=y
 +
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
 +
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
 +
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 +
# CONFIG_PANIC_ON_OOPS is not set
 +
CONFIG_PANIC_ON_OOPS_VALUE=0
 +
# CONFIG_SCHED_DEBUG is not set
 +
# CONFIG_SCHEDSTATS is not set
 +
# CONFIG_TIMER_STATS is not set
 +
CONFIG_DEBUG_PREEMPT=y
 +
 +
#
 +
# Lock Debugging (spinlocks, mutexes, etc...)
 +
#
 +
# CONFIG_DEBUG_RT_MUTEXES is not set
 +
# CONFIG_RT_MUTEX_TESTER is not set
 +
# CONFIG_DEBUG_SPINLOCK is not set
 +
# CONFIG_DEBUG_MUTEXES is not set
 +
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
 +
# CONFIG_DEBUG_LOCK_ALLOC is not set
 +
# CONFIG_PROVE_LOCKING is not set
 +
# CONFIG_LOCK_STAT is not set
 +
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
 +
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 +
CONFIG_STACKTRACE=y
 +
# CONFIG_DEBUG_KOBJECT is not set
 +
CONFIG_DEBUG_BUGVERBOSE=y
 +
# CONFIG_DEBUG_WRITECOUNT is not set
 +
# CONFIG_DEBUG_LIST is not set
 +
# CONFIG_DEBUG_SG is not set
 +
# CONFIG_DEBUG_NOTIFIERS is not set
 +
# CONFIG_DEBUG_CREDENTIALS is not set
 +
 +
#
 +
# RCU Debugging
 +
#
 +
# CONFIG_PROVE_RCU_DELAY is not set
 +
# CONFIG_SPARSE_RCU_POINTER is not set
 +
# CONFIG_RCU_TORTURE_TEST is not set
 +
CONFIG_RCU_CPU_STALL_TIMEOUT=60
 +
CONFIG_RCU_CPU_STALL_VERBOSE=y
 +
CONFIG_RCU_CPU_STALL_INFO=y
 +
# CONFIG_RCU_TRACE is not set
 +
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 +
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
 +
# CONFIG_FAULT_INJECTION is not set
 +
CONFIG_NOP_TRACER=y
 +
CONFIG_HAVE_FUNCTION_TRACER=y
 +
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 +
CONFIG_HAVE_DYNAMIC_FTRACE=y
 +
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 +
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 +
CONFIG_HAVE_C_RECORDMCOUNT=y
 +
CONFIG_TRACER_MAX_TRACE=y
 +
CONFIG_TRACE_CLOCK=y
 +
CONFIG_RING_BUFFER=y
 +
CONFIG_EVENT_TRACING=y
 +
CONFIG_CONTEXT_SWITCH_TRACER=y
 +
CONFIG_TRACING=y
 +
CONFIG_GENERIC_TRACER=y
 +
CONFIG_TRACING_SUPPORT=y
 +
CONFIG_FTRACE=y
 +
CONFIG_FUNCTION_TRACER=y
 +
# CONFIG_FUNCTION_GRAPH_TRACER is not set
 +
# CONFIG_IRQSOFF_TRACER is not set
 +
# CONFIG_PREEMPT_TRACER is not set
 +
CONFIG_SCHED_TRACER=y
 +
CONFIG_WAKEUP_LATENCY_HIST=y
 +
CONFIG_MISSED_TIMER_OFFSETS_HIST=y
 +
# CONFIG_FTRACE_SYSCALLS is not set
 +
CONFIG_TRACER_SNAPSHOT=y
 +
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
 +
CONFIG_BRANCH_PROFILE_NONE=y
 +
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 +
# CONFIG_PROFILE_ALL_BRANCHES is not set
 +
# CONFIG_STACK_TRACER is not set
 +
# CONFIG_BLK_DEV_IO_TRACE is not set
 +
# CONFIG_PROBE_EVENTS is not set
 +
CONFIG_DYNAMIC_FTRACE=y
 +
# CONFIG_FUNCTION_PROFILER is not set
 +
CONFIG_FTRACE_MCOUNT_RECORD=y
 +
# CONFIG_FTRACE_STARTUP_TEST is not set
 +
# CONFIG_RING_BUFFER_BENCHMARK is not set
 +
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
 +
 +
#
 +
# Runtime Testing
 +
#
 +
# CONFIG_LKDTM is not set
 +
# CONFIG_TEST_LIST_SORT is not set
 +
# CONFIG_BACKTRACE_SELF_TEST is not set
 +
# CONFIG_RBTREE_TEST is not set
 +
# CONFIG_INTERVAL_TREE_TEST is not set
 +
# CONFIG_ATOMIC64_SELFTEST is not set
 +
# CONFIG_TEST_STRING_HELPERS is not set
 +
# CONFIG_TEST_KSTRTOX is not set
 +
# CONFIG_DMA_API_DEBUG is not set
 +
# CONFIG_SAMPLES is not set
 +
CONFIG_HAVE_ARCH_KGDB=y
 +
# CONFIG_KGDB is not set
 +
# CONFIG_STRICT_DEVMEM is not set
 +
CONFIG_ARM_UNWIND=y
 +
# CONFIG_DEBUG_USER is not set
 +
CONFIG_DEBUG_LL=y
 +
# CONFIG_DEBUG_ZYNQ_UART0 is not set
 +
CONFIG_DEBUG_ZYNQ_UART1=y
 +
# CONFIG_DEBUG_VEXPRESS_UART0_DETECT is not set
 +
# CONFIG_DEBUG_VEXPRESS_UART0_CA9 is not set
 +
# CONFIG_DEBUG_VEXPRESS_UART0_RS1 is not set
 +
# CONFIG_DEBUG_ICEDCC is not set
 +
# CONFIG_DEBUG_SEMIHOSTING is not set
 +
# CONFIG_DEBUG_LL_UART_8250 is not set
 +
# CONFIG_DEBUG_LL_UART_PL01X is not set
 +
CONFIG_DEBUG_LL_INCLUDE="debug/zynq.S"
 +
# CONFIG_DEBUG_UART_PL01X is not set
 +
# CONFIG_DEBUG_UART_8250 is not set
 +
CONFIG_DEBUG_UNCOMPRESS=y
 +
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
 +
CONFIG_EARLY_PRINTK=y
 +
# CONFIG_OC_ETM is not set
 +
# CONFIG_PID_IN_CONTEXTIDR is not set
 +
 +
#
 +
# Security options
 +
#
 +
# CONFIG_KEYS is not set
 +
# CONFIG_SECURITY_DMESG_RESTRICT is not set
 +
# CONFIG_SECURITY is not set
 +
# CONFIG_SECURITYFS is not set
 +
CONFIG_DEFAULT_SECURITY_DAC=y
 +
CONFIG_DEFAULT_SECURITY=""
 +
CONFIG_CRYPTO=y
 +
 +
#
 +
# Crypto core or helper
 +
#
 +
# CONFIG_CRYPTO_FIPS is not set
 +
CONFIG_CRYPTO_ALGAPI=y
 +
CONFIG_CRYPTO_ALGAPI2=y
 +
CONFIG_CRYPTO_HASH=y
 +
CONFIG_CRYPTO_HASH2=y
 +
CONFIG_CRYPTO_RNG=y
 +
CONFIG_CRYPTO_RNG2=y
 +
# CONFIG_CRYPTO_MANAGER is not set
 +
# CONFIG_CRYPTO_MANAGER2 is not set
 +
# CONFIG_CRYPTO_USER is not set
 +
# CONFIG_CRYPTO_GF128MUL is not set
 +
# CONFIG_CRYPTO_NULL is not set
 +
# CONFIG_CRYPTO_PCRYPT is not set
 +
# CONFIG_CRYPTO_CRYPTD is not set
 +
# CONFIG_CRYPTO_AUTHENC is not set
 +
# CONFIG_CRYPTO_TEST is not set
 +
 +
#
 +
# Authenticated Encryption with Associated Data
 +
#
 +
# CONFIG_CRYPTO_CCM is not set
 +
# CONFIG_CRYPTO_GCM is not set
 +
# CONFIG_CRYPTO_SEQIV is not set
 +
 +
#
 +
# Block modes
 +
#
 +
# CONFIG_CRYPTO_CBC is not set
 +
# CONFIG_CRYPTO_CTR is not set
 +
# CONFIG_CRYPTO_CTS is not set
 +
# CONFIG_CRYPTO_ECB is not set
 +
# CONFIG_CRYPTO_LRW is not set
 +
# CONFIG_CRYPTO_PCBC is not set
 +
# CONFIG_CRYPTO_XTS is not set
 +
 +
#
 +
# Hash modes
 +
#
 +
# CONFIG_CRYPTO_CMAC is not set
 +
# CONFIG_CRYPTO_HMAC is not set
 +
# CONFIG_CRYPTO_XCBC is not set
 +
# CONFIG_CRYPTO_VMAC is not set
 +
 +
#
 +
# Digest
 +
#
 +
CONFIG_CRYPTO_CRC32C=y
 +
# CONFIG_CRYPTO_CRC32 is not set
 +
# CONFIG_CRYPTO_CRCT10DIF is not set
 +
# CONFIG_CRYPTO_GHASH is not set
 +
# CONFIG_CRYPTO_MD4 is not set
 +
# CONFIG_CRYPTO_MD5 is not set
 +
# CONFIG_CRYPTO_MICHAEL_MIC is not set
 +
# CONFIG_CRYPTO_RMD128 is not set
 +
# CONFIG_CRYPTO_RMD160 is not set
 +
# CONFIG_CRYPTO_RMD256 is not set
 +
# CONFIG_CRYPTO_RMD320 is not set
 +
# CONFIG_CRYPTO_SHA1 is not set
 +
# CONFIG_CRYPTO_SHA1_ARM is not set
 +
# CONFIG_CRYPTO_SHA256 is not set
 +
# CONFIG_CRYPTO_SHA512 is not set
 +
# CONFIG_CRYPTO_TGR192 is not set
 +
# CONFIG_CRYPTO_WP512 is not set
 +
 +
#
 +
# Ciphers
 +
#
 +
CONFIG_CRYPTO_AES=y
 +
# CONFIG_CRYPTO_AES_ARM is not set
 +
# CONFIG_CRYPTO_ANUBIS is not set
 +
# CONFIG_CRYPTO_ARC4 is not set
 +
# CONFIG_CRYPTO_BLOWFISH is not set
 +
# CONFIG_CRYPTO_CAMELLIA is not set
 +
# CONFIG_CRYPTO_CAST5 is not set
 +
# CONFIG_CRYPTO_CAST6 is not set
 +
# CONFIG_CRYPTO_DES is not set
 +
# CONFIG_CRYPTO_FCRYPT is not set
 +
# CONFIG_CRYPTO_KHAZAD is not set
 +
# CONFIG_CRYPTO_SALSA20 is not set
 +
# CONFIG_CRYPTO_SEED is not set
 +
# CONFIG_CRYPTO_SERPENT is not set
 +
# CONFIG_CRYPTO_TEA is not set
 +
# CONFIG_CRYPTO_TWOFISH is not set
 +
 +
#
 +
# Compression
 +
#
 +
# CONFIG_CRYPTO_DEFLATE is not set
 +
# CONFIG_CRYPTO_ZLIB is not set
 +
# CONFIG_CRYPTO_LZO is not set
 +
# CONFIG_CRYPTO_LZ4 is not set
 +
# CONFIG_CRYPTO_LZ4HC is not set
 +
 +
#
 +
# Random Number Generation
 +
#
 +
CONFIG_CRYPTO_ANSI_CPRNG=y
 +
# CONFIG_CRYPTO_USER_API_HASH is not set
 +
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
 +
CONFIG_CRYPTO_HW=y
 +
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 +
CONFIG_BINARY_PRINTF=y
 +
 +
#
 +
# Library routines
 +
#
 +
CONFIG_BITREVERSE=y
 +
CONFIG_GENERIC_STRNCPY_FROM_USER=y
 +
CONFIG_GENERIC_STRNLEN_USER=y
 +
CONFIG_GENERIC_NET_UTILS=y
 +
CONFIG_GENERIC_PCI_IOMAP=y
 +
CONFIG_GENERIC_IO=y
 +
# CONFIG_CRC_CCITT is not set
 +
CONFIG_CRC16=y
 +
# CONFIG_CRC_T10DIF is not set
 +
# CONFIG_CRC_ITU_T is not set
 +
CONFIG_CRC32=y
 +
# CONFIG_CRC32_SELFTEST is not set
 +
CONFIG_CRC32_SLICEBY8=y
 +
# CONFIG_CRC32_SLICEBY4 is not set
 +
# CONFIG_CRC32_SARWATE is not set
 +
# CONFIG_CRC32_BIT is not set
 +
# CONFIG_CRC7 is not set
 +
# CONFIG_LIBCRC32C is not set
 +
# CONFIG_CRC8 is not set
 +
CONFIG_ZLIB_INFLATE=y
 +
CONFIG_ZLIB_DEFLATE=y
 +
CONFIG_LZO_COMPRESS=y
 +
CONFIG_LZO_DECOMPRESS=y
 +
# CONFIG_XZ_DEC is not set
 +
# CONFIG_XZ_DEC_BCJ is not set
 +
CONFIG_DECOMPRESS_GZIP=y
 +
CONFIG_GENERIC_ALLOCATOR=y
 +
CONFIG_HAS_IOMEM=y
 +
CONFIG_HAS_DMA=y
 +
CONFIG_CPU_RMAP=y
 +
CONFIG_DQL=y
 +
CONFIG_NLATTR=y
 +
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 +
# CONFIG_AVERAGE is not set
 +
# CONFIG_CORDIC is not set
 +
# CONFIG_DDR is not set
 +
CONFIG_FONT_SUPPORT=y
 +
CONFIG_FONTS=y
 +
CONFIG_FONT_8x8=y
 +
CONFIG_FONT_8x16=y
 +
# CONFIG_FONT_6x11 is not set
 +
# CONFIG_FONT_7x14 is not set
 +
# CONFIG_FONT_PEARL_8x8 is not set
 +
# CONFIG_FONT_ACORN_8x8 is not set
 +
# CONFIG_FONT_MINI_4x6 is not set
 +
# CONFIG_FONT_SUN8x16 is not set
 +
# CONFIG_FONT_SUN12x22 is not set
 +
# CONFIG_FONT_10x18 is not set
 +
CONFIG_VIRTUALIZATION=y
 +
</source>
 +
|hidden = 1
 +
}}
 +
 +
=== Скачиваем ядро, патчи, патчим ядро ===
 +
 +
Скрипт:
 +
* скачивает с kernel.org ванильное ядро 3.12.24
 +
* скачивает с сайта OSADL забирает патчи (см. файл <code>series</code> и перечень ниже) для сборки rbs8:
 +
* применяет патчи к ядру (<code>quilt push -a</code>)
 +
* скачивает с сайта OSADL .config файл для сборки rbs8
 +
 +
В патчи входит:
 +
==== patch-3.12.24-rt38.patch ====
 +
Собственно PREEMPT_RT патч для данного ядра. Переписывает spinlock'и и т.п. так, чтобы более приоритетная задача их могла быстро выгрузить.
 +
==== zedboard-monster.patch ====
 +
 +
Огромный патч для поддержки Zynq'а. Содержит:
 +
* Патчи к ряду важнейших функция ядра
 +
* Набор device tree файлов (zynq-zc702.dtb, zynq-zc702-base-trd.dtb, zynq-zc702-drm-v4l2.dtb, zynq-afx-nand.dtb, zynq-afx-nor.dtb, zynq-cc108.dtb, zynq-zc770-xm010.dtb, zynq-zc770-xm011.dtb, zynq-zc770-xm012.dtb, zynq-zc770-xm013.dtb, zynq-zc706.dtb, zynq-zed.dtb)
 +
* Набор конфигов (xilinx_zynq_apf_defconfig, xilinx_zynq_trd_defconfig, xilinx_zynq_drm_defconfig, xilinx_zynq_defconfig)
 +
* Огромный набор драйверов (AXI, DMA, GPIO, xdevcfg, SPI, USB и т.д.)
 +
* Документация к драйверам
 +
 +
==== sched-add-per-cpu-load-measurement.patch ====
 +
==== add-kernel-parameter-to-disable-defect-cpus.patch ====
 +
==== drivers-misc-kconfig-replace-spaces-with-tabs.patch ====
 +
==== save-current-patchset-in-kernel.patch ====
 +
====  mm-slabinfo-fix-latency.patch ====
 +
Фиксит длительный mutex в чтении /proc/slabinfo
 +
 +
==== drivers-gpu-drm-try-loading-builtin-edids-first.patch ====
 +
==== drivers-gpu-drm-make-edid_load-return-a-void.patch ====
 +
==== add-cpufreq-operating-points-to-dt.patch ====
 +
 +
=== Сборка ядра ===
 +
 +
Рассказываем, где искать mkimage (потребуется для обертки ядра Image -> uImage)
 +
 +
<source lang="bash">
 +
cd u-boot-xlnx
 +
cd tools
 +
export PATH=`pwd`:$PATH
 +
</source>
 +
 +
Возвращаемся в linux-3.12.24-rt38.
 +
 +
Собираем ядро, выполнив в директории <code>linux-3.12.24-rt38</code> команду <code>make</code>:
 +
<source lang="bash">
 +
make ARCH=arm UIMAGE_LOADADDR=0x8000 uImage
 +
</source>
 +
 +
Минут через 5 получаем в каталоге ./arch/arm/boot собранное ядро.
 +
 +
== Ядро от Xilinx ==
 +
 +
Подробнее описано на Wiki Xilinx'а: [http://www.wiki.xilinx.com/Build+kernel Build kernel].
 +
 +
=== Получаем исходники ядра ===
 +
 +
<source lang="bash">
 +
git clone git://github.com/Xilinx/linux-xlnx.git
 +
</source>
 +
 +
В ядро уже включен набор драйверов от Xilinx'а.
 +
 +
=== Патчим ядро ===
 +
 +
На данный момент (02.03.2015) в репозитории лежит ядро 3.18, для которого есть доступный PREEMPT RT патч 3.18.7-rt2.
 +
 +
Качаем патч PREEMPT RT (может потребоваться актуализировать номер версии):
 +
<source lang="bash">
 +
cp -R linux-xlnx linux-rt     
 +
cd linux-rt
 +
wget https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.7-rt2.patch.gz
 +
gunzip patch-3.18.7-rt2.patch
 +
</source>
 +
 +
Применяем патч к ядру:
 +
<source lang="bash">
 +
cat patch-3.18.7-rt2.patch | patch -p1
 +
</source>
 +
 +
=== Конфигурируем ядро ===
 +
 +
Просим собрать конфиг по-умолчанию:
 +
<source lang="bash">
 +
make ARCH=arm xilinx_zynq_defconfig
 +
</source>
 +
 +
Вносим желаемые изменения в .config файл, компилируем...и это ядро не запускается на Ориксе.
 +
 +
== Пара слов о Device Tree ==
 +
 +
На PLDA'шных модулях можно найти скомпилированный Device Tree Blob файл. Он легко переводится в читаемый DTS вид:
 +
<source lang="bash">
 +
/dtc$ ./dtc -I dtb -O dts -o somz.dts somz.dtb
 +
</source>
 +
 +
Утилита dtc доступна в виде исходников в Xilinix'овском гитхабе. Для компиляции потребовалось установить в систему bison и flex.
 +
 +
Получаем:
 +
{{Hider|title = DTS-файл от PLDA 
 +
|content = <source lang="C">
 +
/dts-v1/;
 +
 +
/ {
 +
        #address-cells = <0x1>;
 +
        #size-cells = <0x1>;
 +
        compatible = "xlnx,zynq-7000";
 +
        model = "Xilinx Zynq";
 +
 +
        aliases {
 +
                ethernet0 = "/amba@0/ps7-ethernet@e000b000";
 +
                i2c0 = "/amba@0/i2c@81600000";
 +
                serial0 = "/amba@0/serial@e0000000";
 +
                spi0 = "/amba@0/ps7-qspi@e000d000";
 +
        };
 +
 +
        chosen {
 +
                bootargs = "console=ttyPS0, 115200";
 +
                linux,stdout-path = "/amba@0/serial@e0000000";
 +
        };
 +
 +
        cpus {
 +
                #address-cells = <0x1>;
 +
                #size-cells = <0x0>;
 +
 +
                cpu@0 {
 +
                        bus-handle = <0x1>;
 +
                        compatible = "arm,cortex-a9";
 +
                        d-cache-line-size = <0x20>;
 +
                        d-cache-size = <0x8000>;
 +
                        device_type = "cpu";
 +
                        i-cache-line-size = <0x20>;
 +
                        i-cache-size = <0x8000>;
 +
                        interrupt-handle = <0x2>;
 +
                        reg = <0x0>;
 +
                };
 +
 +
                cpu@1 {
 +
                        bus-handle = <0x1>;
 +
                        compatible = "arm,cortex-a9";
 +
                        d-cache-line-size = <0x20>;
 +
                        d-cache-size = <0x8000>;
 +
                        device_type = "cpu";
 +
                        i-cache-line-size = <0x20>;
 +
                        i-cache-size = <0x8000>;
 +
                        interrupt-handle = <0x2>;
 +
                        reg = <0x1>;
 +
                };
 +
        };
 +
 +
        pmu {
 +
                compatible = "arm,cortex-a9-pmu";
 +
                interrupt-parent = <0x2>;
 +
                interrupts = <0x0 0x5 0x4 0x0 0x6 0x4>;
 +
                reg = <0xf8891000 0x1000 0xf8893000 0x1000>;
 +
                reg-names = "cpu0", "cpu1";
 +
        };
 +
 +
        memory@0 {
 +
                device_type = "memory";
 +
                reg = <0x0 0x20000000>;
 +
        };
 +
 +
        amba@0 {
 +
                #address-cells = <0x1>;
 +
                #size-cells = <0x1>;
 +
                compatible = "xlnx,ps7-axi-interconnect-1.00.a", "simple-bus";
 +
                ranges;
 +
                linux,phandle = <0x1>;
 +
                phandle = <0x1>;
 +
 +
                axi-ext-slave-conn@40000000 {
 +
                        compatible = "xlnx,axi-ext-slave-conn-1.00.a";
 +
                        reg = <0x40000000 0x1000>;
 +
                        xlnx,s-axi-aruser-width = <0x1>;
 +
                        xlnx,s-axi-awuser-width = <0x1>;
 +
                        xlnx,s-axi-buser-width = <0x1>;
 +
                        xlnx,s-axi-id-width = <0x1>;
 +
                        xlnx,s-axi-num-addr-ranges = <0x1>;
 +
                        xlnx,s-axi-num-mem-addr-ranges = <0x0>;
 +
                        xlnx,s-axi-ruser-width = <0x1>;
 +
                        xlnx,s-axi-supports-read = <0x1>;
 +
                        xlnx,s-axi-supports-user-signals = <0x0>;
 +
                        xlnx,s-axi-supports-write = <0x1>;
 +
                        xlnx,s-axi-wuser-width = <0x1>;
 +
                        xlnx,use-advanced-ports = <0x0>;
 +
                };
 +
 +
                i2c@81600000 {
 +
                        compatible = "xlnx,axi-iic-1.02.a", "xlnx,xps-iic-2.00.a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x3b 0x4>;
 +
                        reg = <0x81600000 0x10000>;
 +
                        xlnx,gpo-width = <0x1>;
 +
                        xlnx,iic-freq = <0x186a0>;
 +
                        xlnx,instance = "axi_iic_eeprom";
 +
                        xlnx,scl-inertial-delay = <0x0>;
 +
                        xlnx,sda-inertial-delay = <0x0>;
 +
                        xlnx,sda-level = <0x1>;
 +
                        xlnx,ten-bit-adr = <0x0>;
 +
                };
 +
 +
                axi-xadc@80001000 {
 +
                        compatible = "xlnx,axi-xadc-1.00.a";
 +
                        reg = <0x80001000 0x1000>;
 +
                        xlnx,has-temp-bus = <0x1>;
 +
                        xlnx,include-intr = <0x0>;
 +
                        xlnx,instance = "axi_xadc_0";
 +
                        xlnx,sim-monitor-file = "Sysmon_Design.txt";
 +
                };
 +
 +
                ps7-afi@f8008000 {
 +
                        compatible = "xlnx,ps7-afi-1.00.a";
 +
                        reg = <0xf8008000 0x1000>;
 +
                };
 +
 +
                ps7-afi@f8009000 {
 +
                        compatible = "xlnx,ps7-afi-1.00.a";
 +
                        reg = <0xf8009000 0x1000>;
 +
                };
 +
 +
                ps7-afi@f800a000 {
 +
                        compatible = "xlnx,ps7-afi-1.00.a";
 +
                        reg = <0xf800a000 0x1000>;
 +
                };
 +
 +
                ps7-afi@f800b000 {
 +
                        compatible = "xlnx,ps7-afi-1.00.a";
 +
                        reg = <0xf800b000 0x1000>;
 +
                };
 +
 +
                ps7-ddrc@f8006000 {
 +
                        compatible = "xlnx,ps7-ddrc-1.00.a", "xlnx,ps7-ddrc";
 +
                        reg = <0xf8006000 0x1000>;
 +
                        xlnx,has-ecc = <0x0>;
 +
                };
 +
 +
                ps7-dev-cfg@f8007000 {
 +
                        clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
 +
                        clocks = <0x3 0xc 0x3 0xf 0x3 0x10 0x3 0x11 0x3 0x12>;
 +
                        compatible = "xlnx,ps7-dev-cfg-1.00.a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x8 0x4>;
 +
                        reg = <0xf8007000 0x100>;
 +
                };
 +
 +
                ps7-dma@f8003000 {
 +
                        #dma-cells = <0x1>;
 +
                        #dma-channels = <0x8>;
 +
                        #dma-requests = <0x4>;
 +
                        clock-names = "apb_pclk";
 +
                        clocks = <0x3 0x1b>;
 +
                        compatible = "xlnx,ps7-dma-1.00.a", "arm,primecell", "arm,pl330";
 +
                        interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0xd 0x4 0x0 0xe 0x4 0x0 0xf 0x4 0x0 0x10 0x4 0x0 0x11 0x4 0x0 0x28 0x4 0x0 0x29 0x4 0x0 0x2a 0x4 0x0 0x2b 0x4>;
 +
                        reg = <0xf8003000 0x1000>;
 +
                };
 +
 +
                ps7-ethernet@e000b000 {
 +
                        #address-cells = <0x1>;
 +
                        #size-cells = <0x0>;
 +
                        clock-names = "ref_clk", "aper_clk";
 +
                        clocks = <0x3 0xd 0x3 0x1e>;
 +
                        compatible = "xlnx,ps7-ethernet-1.00.a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x16 0x4>;
 +
                        local-mac-address = [00 0a 35 00 00 00];
 +
                        phy-handle = <0x4>;
 +
                        phy-mode = "rgmii-id";
 +
                        reg = <0xe000b000 0x1000>;
 +
                        xlnx,eth-mode = <0x1>;
 +
                        xlnx,has-mdio = <0x1>;
 +
                        xlnx,ptp-enet-clock = <0x69f6bcb>;
 +
 +
                        mdio {
 +
                                #address-cells = <0x1>;
 +
                                #size-cells = <0x0>;
 +
 +
                                phy@1 {
 +
                                        compatible = "micrel,ksz9021";
 +
                                        device_type = "ethernet-phy";
 +
                                        reg = <0x1>;
 +
                                        linux,phandle = <0x4>;
 +
                                        phandle = <0x4>;
 +
                                };
 +
                        };
 +
                };
 +
 +
                ps7-gpio@e000a000 {
 +
                        #gpio-cells = <0x2>;
 +
                        clocks = <0x3 0x2a>;
 +
                        compatible = "xlnx,ps7-gpio-1.00.a";
 +
                        emio-gpio-width = <0x40>;
 +
                        gpio-controller;
 +
                        gpio-mask-high = <0x3c000>;
 +
                        gpio-mask-low = <0x80>;
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x14 0x4>;
 +
                        reg = <0xe000a000 0x1000>;
 +
                        linux,phandle = <0x5>;
 +
                        phandle = <0x5>;
 +
                };
 +
 +
                ps7-iop-bus-config@e0200000 {
 +
                        compatible = "xlnx,ps7-iop-bus-config-1.00.a";
 +
                        reg = <0xe0200000 0x1000>;
 +
                };
 +
 +
                ps7-ocmc@f800c000 {
 +
                        compatible = "xlnx,ps7-ocmc-1.00.a", "xlnx,zynq-ocm-1.0";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x3 0x4>;
 +
                        reg = <0xf800c000 0x1000>;
 +
                };
 +
 +
                ps7-pl310@f8f02000 {
 +
                        arm,data-latency = <0x3 0x2 0x2>;
 +
                        arm,tag-latency = <0x2 0x2 0x2>;
 +
                        cache-level = <0x2>;
 +
                        cache-unified;
 +
                        compatible = "xlnx,ps7-pl310-1.00.a", "arm,pl310-cache";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x2 0x4>;
 +
                        reg = <0xf8f02000 0x1000>;
 +
                };
 +
 +
                ps7-qspi@e000d000 {
 +
                        clock-names = "ref_clk", "aper_clk";
 +
                        clocks = <0x3 0xa 0x3 0x2b>;
 +
                        compatible = "xlnx,ps7-qspi-1.00.a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x13 0x4>;
 +
                        is-dual = <0x0>;
 +
                        num-chip-select = <0x1>;
 +
                        reg = <0xe000d000 0x1000>;
 +
                        xlnx,fb-clk = <0x1>;
 +
                        xlnx,qspi-mode = <0x0>;
 +
                };
 +
 +
                ps7-qspi-linear@fc000000 {
 +
                        clock-names = "ref_clk", "aper_clk";
 +
                        clocks = <0x3 0xa 0x3 0x2b>;
 +
                        compatible = "xlnx,ps7-qspi-linear-1.00.a";
 +
                        reg = <0xfc000000 0x1000000>;
 +
                };
 +
 +
                ps7-scugic@f8f01000 {
 +
                        #address-cells = <0x2>;
 +
                        #interrupt-cells = <0x3>;
 +
                        #size-cells = <0x1>;
 +
                        compatible = "xlnx,ps7-scugic-1.00.a", "arm,cortex-a9-gic", "arm,gic";
 +
                        interrupt-controller;
 +
                        num_cpus = <0x2>;
 +
                        num_interrupts = <0x60>;
 +
                        reg = <0xf8f01000 0x1000 0xf8f00100 0x100>;
 +
                        linux,phandle = <0x2>;
 +
                        phandle = <0x2>;
 +
                };
 +
 +
                ps7-scutimer@f8f00600 {
 +
                        clocks = <0x3 0x4>;
 +
                        compatible = "xlnx,ps7-scutimer-1.00.a", "arm,cortex-a9-twd-timer";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x1 0xd 0x301>;
 +
                        reg = <0xf8f00600 0x20>;
 +
                };
 +
 +
                ps7-scuwdt@f8f00620 {
 +
                        clocks = <0x3 0x4>;
 +
                        compatible = "xlnx,ps7-scuwdt-1.00.a";
 +
                        device_type = "watchdog";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x1 0xe 0x301>;
 +
                        reg = <0xf8f00620 0xe0>;
 +
                };
 +
 +
                ps7-sdio@e0100000 {
 +
                        clock-frequency = <0x2faf080>;
 +
                        clock-names = "clk_xin", "clk_ahb";
 +
                        clocks = <0x3 0x15 0x3 0x20>;
 +
                        compatible = "xlnx,ps7-sdio-1.00.a", "generic-sdhci", "arasan,sdhci-8.9a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x18 0x4>;
 +
                        reg = <0xe0100000 0x1000>;
 +
                        xlnx,has-cd = <0x1>;
 +
                        xlnx,has-power = <0x0>;
 +
                        xlnx,has-wp = <0x0>;
 +
                };
 +
 +
                ps7-sdio@e0101000 {
 +
                        clock-frequency = <0x2faf080>;
 +
                        clock-names = "clk_xin", "clk_ahb";
 +
                        clocks = <0x3 0x16 0x3 0x21>;
 +
                        compatible = "xlnx,ps7-sdio-1.00.a", "generic-sdhci", "arasan,sdhci-8.9a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x2f 0x4>;
 +
                        reg = <0xe0101000 0x1000>;
 +
                        xlnx,has-cd = <0x1>;
 +
                        xlnx,has-power = <0x0>;
 +
                        xlnx,has-wp = <0x0>;
 +
                };
 +
 +
                ps7-slcr@f8000000 {
 +
                        compatible = "xlnx,ps7-slcr-1.00.a", "xlnx,zynq-slcr";
 +
                        reg = <0xf8000000 0x1000>;
 +
 +
                        clocks {
 +
                                #address-cells = <0x1>;
 +
                                #size-cells = <0x0>;
 +
 +
                                clkc {
 +
                                        #clock-cells = <0x1>;
 +
                                        clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", "dci", "lqspi", "smc", "pcap", "gem0", "gem1", "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma", "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper", "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper", "smc_aper", "swdt", "dbg_trc", "dbg_apb";
 +
                                        compatible = "xlnx,ps7-clkc";
 +
                                        fclk-enable = <0xf>;
 +
                                        ps-clk-frequency = <0x1fca055>;
 +
                                        linux,phandle = <0x3>;
 +
                                        phandle = <0x3>;
 +
                                };
 +
                        };
 +
                };
 +
 +
                ps7-ttc@f8001000 {
 +
                        clocks = <0x3 0x6>;
 +
                        compatible = "xlnx,ps7-ttc-1.00.a", "cdns,ttc";
 +
                        interrupt-names = "ttc0", "ttc1", "ttc2";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0xa 0x4 0x0 0xb 0x4 0x0 0xc 0x4>;
 +
                        reg = <0xf8001000 0x1000>;
 +
                };
 +
 +
                serial@e0000000 {
 +
                        clock-names = "ref_clk", "aper_clk";
 +
                        clocks = <0x3 0x17 0x3 0x28>;
 +
                        compatible = "xlnx,ps7-uart-1.00.a", "xlnx,xuartps";
 +
                        current-speed = <0x1c200>;
 +
                        device_type = "serial";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x1b 0x4>;
 +
                        port-number = <0x0>;
 +
                        reg = <0xe0000000 0x1000>;
 +
                        xlnx,has-modem = <0x0>;
 +
                };
 +
 +
                ps7-usb@e0002000 {
 +
                        clocks = <0x3 0x1c>;
 +
                        compatible = "xlnx,ps7-usb-1.00.a";
 +
                        usb-reset = <0x5 0x7 0x0>;
 +
                        dr_mode = "host";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x15 0x4>;
 +
                        phy_type = "ulpi";
 +
                        reg = <0xe0002000 0x1000>;
 +
                };
 +
 +
                ps7-wdt@f8005000 {
 +
                        clocks = <0x3 0x2d>;
 +
                        compatible = "xlnx,ps7-wdt-1.00.a";
 +
                        device_type = "watchdog";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x9 0x1>;
 +
                        reg = <0xf8005000 0x1000>;
 +
                        reset = <0x0>;
 +
                        timeout = <0xa>;
 +
                };
 +
 +
                ps7-xadc@f8007100 {
 +
                        clocks = <0x3 0xc>;
 +
                        compatible = "xlnx,ps7-xadc-1.00.a";
 +
                        interrupt-parent = <0x2>;
 +
                        interrupts = <0x0 0x7 0x4>;
 +
                        reg = <0xf8007100 0x20>;
 +
                };
 +
        };
 +
};
 +
</source>
 +
|hidden = 1
 +
}}
 +
 +
 +
{{Hider|title = DTS-файл от PLDA во второй партии модулей (ядро Linux-3.12.0-somz Wed Jul  9 10:55:30 2014)
 +
|content = <source lang="C">
 +
/dts-v1/;
 +
 +
/ {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x1>;
 +
compatible = "xlnx,zynq-7000";
 +
model = "Xilinx Zynq";
 +
 +
aliases {
 +
ethernet0 = "/amba@0/ps7-ethernet@e000b000";
 +
i2c0 = "/amba@0/ps7-i2c@e0004000";
 +
i2c1 = "/amba@0/i2c@41600000";
 +
serial0 = "/amba@0/serial@e0000000";
 +
spi0 = "/amba@0/ps7-qspi@e000d000";
 +
};
 +
 +
chosen {
 +
bootargs = "console=ttyPS0,115200";
 +
linux,stdout-path = "/amba@0/serial@e0000000";
 +
};
 +
 +
cpus {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x0>;
 +
 +
cpu@0 {
 +
bus-handle = <0x1>;
 +
compatible = "arm,cortex-a9";
 +
d-cache-line-size = <0x20>;
 +
d-cache-size = <0x8000>;
 +
device_type = "cpu";
 +
i-cache-line-size = <0x20>;
 +
i-cache-size = <0x8000>;
 +
interrupt-handle = <0x2>;
 +
reg = <0x0>;
 +
};
 +
 +
cpu@1 {
 +
bus-handle = <0x1>;
 +
compatible = "arm,cortex-a9";
 +
d-cache-line-size = <0x20>;
 +
d-cache-size = <0x8000>;
 +
device_type = "cpu";
 +
i-cache-line-size = <0x20>;
 +
i-cache-size = <0x8000>;
 +
interrupt-handle = <0x2>;
 +
reg = <0x1>;
 +
};
 +
};
 +
 +
pmu {
 +
compatible = "arm,cortex-a9-pmu";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x5 0x4 0x0 0x6 0x4>;
 +
reg = <0xf8891000 0x1000 0xf8893000 0x1000>;
 +
reg-names = "cpu0", "cpu1";
 +
};
 +
 +
memory@0 {
 +
device_type = "memory";
 +
reg = <0x0 0x40000000>;
 +
};
 +
 +
amba@0 {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x1>;
 +
compatible = "xlnx,ps7-axi-interconnect-1.00.a", "simple-bus";
 +
ranges;
 +
linux,phandle = <0x1>;
 +
phandle = <0x1>;
 +
 +
axi-ext-slave-conn@63e00000 {
 +
compatible = "xlnx,axi-ext-slave-conn-1.00.a";
 +
reg = <0x63e00000 0x10000>;
 +
xlnx,s-axi-aruser-width = <0x1>;
 +
xlnx,s-axi-awuser-width = <0x1>;
 +
xlnx,s-axi-buser-width = <0x1>;
 +
xlnx,s-axi-id-width = <0x1>;
 +
xlnx,s-axi-num-addr-ranges = <0x1>;
 +
xlnx,s-axi-num-mem-addr-ranges = <0x0>;
 +
xlnx,s-axi-ruser-width = <0x1>;
 +
xlnx,s-axi-supports-read = <0x1>;
 +
xlnx,s-axi-supports-user-signals = <0x0>;
 +
xlnx,s-axi-supports-write = <0x1>;
 +
xlnx,s-axi-wuser-width = <0x1>;
 +
xlnx,use-advanced-ports = <0x0>;
 +
};
 +
 +
logicvc@7fa00000 {
 +
compatible = "xylon,logicvc-3.02.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x3a 0x4>;
 +
reg = <0x7fa00000 0x10000>;
 +
xlnx,buffer-0-offset = <0x438>;
 +
xlnx,buffer-1-offset = <0x400>;
 +
xlnx,buffer-2-offset = <0x400>;
 +
xlnx,buffer-3-offset = <0x400>;
 +
xlnx,buffer-4-offset = <0x400>;
 +
xlnx,display-color-space = <0x1>;
 +
xlnx,display-interface = <0x0>;
 +
xlnx,dvi-clk-mode = <0x0>;
 +
xlnx,e-data-width = <0x18>;
 +
xlnx,e-layer = <0x0>;
 +
xlnx,increase-fifo = <0x1>;
 +
xlnx,ip-license-check = <0x1>;
 +
xlnx,ip-license-type = <0x1>;
 +
xlnx,ip-major-revision = <0x3>;
 +
xlnx,ip-minor-revision = <0x2>;
 +
xlnx,ip-patch-level = <0x0>;
 +
xlnx,ip-time-before-break = <0x1>;
 +
xlnx,layer-0-alpha-mode = <0x0>;
 +
xlnx,layer-0-data-width = <0x18>;
 +
xlnx,layer-0-offset = <0x0>;
 +
xlnx,layer-0-type = <0x0>;
 +
xlnx,layer-1-alpha-mode = <0x0>;
 +
xlnx,layer-1-data-width = <0x10>;
 +
xlnx,layer-1-offset = <0x800>;
 +
xlnx,layer-1-type = <0x0>;
 +
xlnx,layer-2-alpha-mode = <0x0>;
 +
xlnx,layer-2-data-width = <0x10>;
 +
xlnx,layer-2-offset = <0x1000>;
 +
xlnx,layer-2-type = <0x0>;
 +
xlnx,layer-3-alpha-mode = <0x0>;
 +
xlnx,layer-3-data-width = <0x10>;
 +
xlnx,layer-3-offset = <0x1800>;
 +
xlnx,layer-3-type = <0x0>;
 +
xlnx,layer-4-alpha-mode = <0x0>;
 +
xlnx,layer-4-data-width = <0x10>;
 +
xlnx,layer-4-offset = <0x2000>;
 +
xlnx,layer-4-type = <0x0>;
 +
xlnx,lvds-data-width = <0x4>;
 +
xlnx,mem-burst = <0x4>;
 +
xlnx,mem-byte-swap = <0x0>;
 +
xlnx,mem-little-endian = <0x1>;
 +
xlnx,mplb-awidth = <0x20>;
 +
xlnx,mplb-dwidth = <0x40>;
 +
xlnx,mplb-native-dwidth = <0x20>;
 +
xlnx,mplb-num-masters = <0x8>;
 +
xlnx,mplb-p2p = <0x0>;
 +
xlnx,mplb-priority = <0x3>;
 +
xlnx,mplb-smallest-slave = <0x20>;
 +
xlnx,mplb-support-bursts = <0x1>;
 +
xlnx,num-of-layers = <0x1>;
 +
xlnx,pixel-data-width = <0x10>;
 +
xlnx,readable-regs = <0x1>;
 +
xlnx,reg-byte-swap = <0x0>;
 +
xlnx,regs-interface = <0x2>;
 +
xlnx,row-stride = <0x800>;
 +
xlnx,use-background = <0x0>;
 +
xlnx,use-e-parallel-input = <0x0>;
 +
xlnx,use-e-vclk-bufgmux = <0x1>;
 +
xlnx,use-multiplier = <0x2>;
 +
xlnx,use-size-position = <0x1>;
 +
xlnx,use-vclk2 = <0x1>;
 +
xlnx,use-xtreme-dsp = <0x2>;
 +
xlnx,vclk-period = <0x61a8>;
 +
xlnx,vmem-baseaddr = <0x1c000000>;
 +
xlnx,vmem-highaddr = <0x1dffffff>;
 +
xlnx,vmem-interface = <0x2>;
 +
xlnx,xcolor = <0x0>;
 +
xlnx,xmb-data-bus-width = <0x40>;
 +
pixel-clock-source = <0x3>;
 +
pixel-data-invert = <0x0>;
 +
pixel-clock-active-high = <0x1>;
 +
pixel-component-format = "ARGB";
 +
pixel-component-layer = <0x0 0x1 0x2>;
 +
active-layer = <0x0>;
 +
videomode = "1920x1080";
 +
linux,phandle = <0x5>;
 +
phandle = <0x5>;
 +
 +
edid {
 +
preffered-videomode = <0x1>;
 +
display-data = <0x0>;
 +
};
 +
};
 +
 +
xylon-video-params {
 +
 +
1920x1080 {
 +
refresh = <0x3c>;
 +
xres = <0x780>;
 +
yres = <0x438>;
 +
pixclock-khz = <0x24414>;
 +
left-margin = <0x94>;
 +
right-margin = <0x58>;
 +
upper-margin = <0x24>;
 +
lower-margin = <0x4>;
 +
hsync-len = <0x2c>;
 +
vsync-len = <0x5>;
 +
sync = <0x0>;
 +
vmode = <0x0>;
 +
};
 +
};
 +
 +
i2c@41600000 {
 +
compatible = "xlnx,axi-iic-1.02.a", "xlnx,xps-iic-2.00.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x37 0x4>;
 +
reg = <0x41600000 0x10000>;
 +
xlnx,gpo-width = <0x1>;
 +
xlnx,iic-freq = <0x186a0>;
 +
xlnx,instance = "i2c_eeprom";
 +
xlnx,scl-inertial-delay = <0x0>;
 +
xlnx,sda-inertial-delay = <0x0>;
 +
xlnx,sda-level = <0x1>;
 +
xlnx,ten-bit-adr = <0x0>;
 +
};
 +
 +
ps7-afi@f8008000 {
 +
compatible = "xlnx,ps7-afi-1.00.a";
 +
reg = <0xf8008000 0x1000>;
 +
};
 +
 +
ps7-afi@f8009000 {
 +
compatible = "xlnx,ps7-afi-1.00.a";
 +
reg = <0xf8009000 0x1000>;
 +
};
 +
 +
ps7-afi@f800a000 {
 +
compatible = "xlnx,ps7-afi-1.00.a";
 +
reg = <0xf800a000 0x1000>;
 +
};
 +
 +
ps7-afi@f800b000 {
 +
compatible = "xlnx,ps7-afi-1.00.a";
 +
reg = <0xf800b000 0x1000>;
 +
};
 +
 +
ps7-ddrc@f8006000 {
 +
compatible = "xlnx,ps7-ddrc-1.00.a", "xlnx,ps7-ddrc";
 +
reg = <0xf8006000 0x1000>;
 +
xlnx,has-ecc = <0x0>;
 +
};
 +
 +
ps7-dev-cfg@f8007000 {
 +
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
 +
clocks = <0x3 0xc 0x3 0xf 0x3 0x10 0x3 0x11 0x3 0x12>;
 +
compatible = "xlnx,ps7-dev-cfg-1.00.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x8 0x4>;
 +
reg = <0xf8007000 0x100>;
 +
};
 +
 +
ps7-dma@f8003000 {
 +
#dma-cells = <0x1>;
 +
#dma-channels = <0x8>;
 +
#dma-requests = <0x4>;
 +
clock-names = "apb_pclk";
 +
clocks = <0x3 0x1b>;
 +
compatible = "xlnx,ps7-dma-1.00.a", "arm,primecell", "arm,pl330";
 +
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0xd 0x4 0x0 0xe 0x4 0x0 0xf 0x4 0x0 0x10 0x4 0x0 0x11 0x4 0x0 0x28 0x4 0x0 0x29 0x4 0x0 0x2a 0x4 0x0 0x2b 0x4>;
 +
reg = <0xf8003000 0x1000>;
 +
};
 +
 +
ps7-ethernet@e000b000 {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x0>;
 +
clock-names = "ref_clk", "aper_clk";
 +
clocks = <0x3 0xd 0x3 0x1e>;
 +
compatible = "xlnx,ps7-ethernet-1.00.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x16 0x4>;
 +
local-mac-address = [00 0a 35 00 00 00];
 +
phy-handle = <0x4>;
 +
phy-mode = "rgmii-id";
 +
reg = <0xe000b000 0x1000>;
 +
xlnx,eth-mode = <0x1>;
 +
xlnx,has-mdio = <0x1>;
 +
xlnx,ptp-enet-clock = <0x69f6bcb>;
 +
 +
mdio {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x0>;
 +
 +
phy@1 {
 +
compatible = "micrel,ksz9021";
 +
device_type = "ethernet-phy";
 +
reg = <0x1>;
 +
rxc-skew-ps = <0xbb8>;
 +
rxdv-skew-ps = <0x0>;
 +
txc-skew-ps = <0xbb8>;
 +
txen-skew-ps = <0x0>;
 +
rxd3-skew-ps = <0x0>;
 +
rxd2-skew-ps = <0x0>;
 +
rxd1-skew-ps = <0x0>;
 +
rxd0-skew-ps = <0x0>;
 +
linux,phandle = <0x4>;
 +
phandle = <0x4>;
 +
};
 +
};
 +
};
 +
 +
ps7-gpio@e000a000 {
 +
#gpio-cells = <0x2>;
 +
clocks = <0x3 0x2a>;
 +
compatible = "xlnx,ps7-gpio-1.00.a";
 +
emio-gpio-width = <0x40>;
 +
gpio-controller;
 +
gpio-mask-high = <0x3c000>;
 +
gpio-mask-low = <0xf200>;
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x14 0x4>;
 +
reg = <0xe000a000 0x1000>;
 +
linux,phandle = <0x6>;
 +
phandle = <0x6>;
 +
};
 +
 +
ps7-i2c@e0004000 {
 +
bus-id = <0x0>;
 +
clocks = <0x3 0x26>;
 +
compatible = "xlnx,ps7-i2c-1.00.a";
 +
i2c-clk = <0x61a80>;
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x19 0x4>;
 +
reg = <0xe0004000 0x1000>;
 +
xlnx,has-interrupt = <0x0>;
 +
#address-cells = <0x1>;
 +
#size-cells = <0x0>;
 +
 +
i2c_hdmi@39 {
 +
compatible = "adv7511";
 +
reg = <0x39>;
 +
interrupts = <0x0 0x36 0x4>;
 +
interrupt-parent = <0x2>;
 +
dma-request = <0x5>;
 +
edid-addr = <0x50>;
 +
};
 +
 +
i2c_usrclk@55 {
 +
compatible = "si570";
 +
reg = <0x55>;
 +
factory-fout = <0x989680>;
 +
initial-fout = <0x8d9ee20>;
 +
};
 +
};
 +
 +
ps7-iop-bus-config@e0200000 {
 +
compatible = "xlnx,ps7-iop-bus-config-1.00.a";
 +
reg = <0xe0200000 0x1000>;
 +
};
 +
 +
ps7-ocmc@f800c000 {
 +
compatible = "xlnx,ps7-ocmc-1.00.a", "xlnx,zynq-ocm-1.0";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x3 0x4>;
 +
reg = <0xf800c000 0x1000>;
 +
};
 +
 +
ps7-pl310@f8f02000 {
 +
arm,data-latency = <0x3 0x2 0x2>;
 +
arm,tag-latency = <0x2 0x2 0x2>;
 +
cache-level = <0x2>;
 +
cache-unified;
 +
compatible = "xlnx,ps7-pl310-1.00.a", "arm,pl310-cache";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x2 0x4>;
 +
reg = <0xf8f02000 0x1000>;
 +
};
 +
 +
ps7-qspi@e000d000 {
 +
clock-names = "ref_clk", "aper_clk";
 +
clocks = <0x3 0xa 0x3 0x2b>;
 +
compatible = "xlnx,ps7-qspi-1.00.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x13 0x4>;
 +
is-dual = <0x0>;
 +
num-chip-select = <0x1>;
 +
reg = <0xe000d000 0x1000>;
 +
xlnx,fb-clk = <0x1>;
 +
xlnx,qspi-mode = <0x0>;
 +
};
 +
 +
ps7-qspi-linear@fc000000 {
 +
clock-names = "ref_clk", "aper_clk";
 +
clocks = <0x3 0xa 0x3 0x2b>;
 +
compatible = "xlnx,ps7-qspi-linear-1.00.a";
 +
reg = <0xfc000000 0x1000000>;
 +
};
 +
 +
ps7-scugic@f8f01000 {
 +
#address-cells = <0x2>;
 +
#interrupt-cells = <0x3>;
 +
#size-cells = <0x1>;
 +
compatible = "xlnx,ps7-scugic-1.00.a", "arm,cortex-a9-gic", "arm,gic";
 +
interrupt-controller;
 +
num_cpus = <0x2>;
 +
num_interrupts = <0x60>;
 +
reg = <0xf8f01000 0x1000 0xf8f00100 0x100>;
 +
linux,phandle = <0x2>;
 +
phandle = <0x2>;
 +
};
 +
 +
ps7-scutimer@f8f00600 {
 +
clocks = <0x3 0x4>;
 +
compatible = "xlnx,ps7-scutimer-1.00.a", "arm,cortex-a9-twd-timer";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x1 0xd 0x301>;
 +
reg = <0xf8f00600 0x20>;
 +
};
 +
 +
ps7-scuwdt@f8f00620 {
 +
clocks = <0x3 0x4>;
 +
compatible = "xlnx,ps7-scuwdt-1.00.a";
 +
device_type = "watchdog";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x1 0xe 0x301>;
 +
reg = <0xf8f00620 0xe0>;
 +
};
 +
 +
ps7-sdio@e0100000 {
 +
clock-frequency = <0x2faf080>;
 +
clock-names = "clk_xin", "clk_ahb";
 +
clocks = <0x3 0x15 0x3 0x20>;
 +
compatible = "xlnx,ps7-sdio-1.00.a", "generic-sdhci", "arasan,sdhci-8.9a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x18 0x4>;
 +
reg = <0xe0100000 0x1000>;
 +
xlnx,has-cd = <0x1>;
 +
xlnx,has-power = <0x0>;
 +
xlnx,has-wp = <0x0>;
 +
};
 +
 +
ps7-slcr@f8000000 {
 +
compatible = "xlnx,ps7-slcr-1.00.a", "xlnx,zynq-slcr";
 +
reg = <0xf8000000 0x1000>;
 +
 +
clocks {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x0>;
 +
 +
clkc {
 +
#clock-cells = <0x1>;
 +
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", "dci", "lqspi", "smc", "pcap", "gem0", "gem1", "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma", "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper", "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper", "smc_aper", "swdt", "dbg_trc", "dbg_apb";
 +
compatible = "xlnx,ps7-clkc";
 +
fclk-enable = <0xf>;
 +
ps-clk-frequency = <0x1fca055>;
 +
linux,phandle = <0x3>;
 +
phandle = <0x3>;
 +
};
 +
};
 +
};
 +
 +
ps7-ttc@f8001000 {
 +
clocks = <0x3 0x6>;
 +
compatible = "xlnx,ps7-ttc-1.00.a", "cdns,ttc";
 +
interrupt-names = "ttc0", "ttc1", "ttc2";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0xa 0x4 0x0 0xb 0x4 0x0 0xc 0x4>;
 +
reg = <0xf8001000 0x1000>;
 +
};
 +
 +
serial@e0000000 {
 +
clock-names = "ref_clk", "aper_clk";
 +
clocks = <0x3 0x17 0x3 0x28>;
 +
compatible = "xlnx,ps7-uart-1.00.a", "xlnx,xuartps";
 +
current-speed = <0x1c200>;
 +
device_type = "serial";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x1b 0x4>;
 +
port-number = <0x0>;
 +
reg = <0xe0000000 0x1000>;
 +
xlnx,has-modem = <0x0>;
 +
};
 +
 +
ps7-usb@e0002000 {
 +
clocks = <0x3 0x1c>;
 +
compatible = "xlnx,ps7-usb-1.00.a";
 +
dr_mode = "host";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x15 0x4>;
 +
phy_type = "ulpi";
 +
reg = <0xe0002000 0x1000>;
 +
usb-reset = <0x6 0x7 0x0>;
 +
};
 +
 +
ps7-wdt@f8005000 {
 +
clocks = <0x3 0x2d>;
 +
compatible = "xlnx,ps7-wdt-1.00.a";
 +
device_type = "watchdog";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x9 0x1>;
 +
reg = <0xf8005000 0x1000>;
 +
reset = <0x0>;
 +
timeout = <0xa>;
 +
};
 +
 +
ps7-xadc@f8007100 {
 +
clocks = <0x3 0xc>;
 +
compatible = "xlnx,ps7-xadc-1.00.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x7 0x4>;
 +
reg = <0xf8007100 0x20>;
 +
};
 +
 +
sfilter-top@77800000 {
 +
compatible = "xlnx,sfilter-top-1.08.a";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x3b 0x4>;
 +
reg = <0x77800000 0x10000>;
 +
xlnx,input-stream-protocol = "GENERIC";
 +
xlnx,output-stream-protocol = "GENERIC";
 +
xlnx,s-axi-control-bus-addr-width = <0x5>;
 +
xlnx,s-axi-control-bus-data-width = <0x20>;
 +
xlnx,s-axi-control-bus-protocol = "AXI4LITE";
 +
};
 +
 +
axivdma@43000000 {
 +
#address-cells = <0x1>;
 +
#size-cells = <0x1>;
 +
compatible = "xlnx,axi-vdma";
 +
ranges = <0x43000000 0x43000000 0x10000>;
 +
reg = <0x43000000 0x10000>;
 +
xlnx,flush-fsync = <0x1>;
 +
xlnx,num-fstores = <0x1>;
 +
 +
dma-channel@43000000 {
 +
compatible = "xlnx,axi-vdma-mm2s-channel";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x39 0x4>;
 +
xlnx,datawidth = <0x20>;
 +
xlnx,device-id = <0x0>;
 +
xlnx,genlock-mode = <0x1>;
 +
};
 +
 +
dma-channel@43000030 {
 +
compatible = "xlnx,axi-vdma-s2mm-channel";
 +
interrupt-parent = <0x2>;
 +
interrupts = <0x0 0x38 0x4>;
 +
xlnx,datawidth = <0x20>;
 +
xlnx,device-id = <0x0>;
 +
xlnx,genlock-mode = <0x0>;
 +
};
 +
};
 +
 +
axi-xadc@43200000 {
 +
compatible = "xlnx,axi-xadc-1.00.a";
 +
reg = <0x43200000 0x10000>;
 +
xlnx,has-temp-bus = <0x1>;
 +
xlnx,include-intr = <0x0>;
 +
xlnx,instance = "xadc";
 +
xlnx,sim-monitor-file = "Sysmon_Design.txt";
 +
};
 +
};
 +
};
 +
</source>
 +
|hidden = 1
 +
}}
 +
 +
== Лог загрузки различных ядер ==
 +
 +
{{Hider|title = Ядро от PLDA 
 +
|content = <source lang="bash">
 +
U-Boot 2013.10-dirty (Jan 28 2014 - 17:52:15)
 +
 +
Memory: ECC disabled
 +
DRAM:  512 MiB
 +
Board: SOMZ-V2.0, PLDA Ltd <http://plda.com>
 +
MMC:  zynq_sdhci: 0, zynq_sdhci: 1
 +
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
 +
*** Warning - bad CRC, using default environment
 +
 +
In:    serial
 +
Out:  serial
 +
Err:  serial
 +
Net:  Gem.e000b000
 +
Hit any key to stop autoboot:  0
 +
Booting Debian from microSD Card...
 +
Device: zynq_sdhci
 +
Manufacturer ID: 1b
 +
OEM: 534d
 +
Name: 00000
 +
Tran Speed: 50000000
 +
Rd Block Len: 512
 +
SD version 2.0
 +
High Capacity: Yes
 +
Capacity: 7.3 GiB
 +
Bus Width: 4-bit
 +
reading uImage
 +
3245080 bytes read in 288 ms (10.7 MiB/s)
 +
reading somz.dtb
 +
8698 bytes read in 16 ms (530.3 KiB/s)
 +
## Booting kernel from Legacy Image at 03000000 ...
 +
  Image Name:  Linux-3.12.0-somz-dirty
 +
  Image Type:  ARM Linux Kernel Image (uncompressed)
 +
  Data Size:    3245016 Bytes = 3.1 MiB
 +
  Load Address: 00800000
 +
  Entry Point:  00800000
 +
  Verifying Checksum ... OK
 +
## Flattened Device Tree blob at 02a00000
 +
  Booting using the fdt blob at 0x2a00000
 +
  Loading Kernel Image ... OK
 +
  Loading Device Tree to 0fffa000, end 0ffff1f9 ... OK
 +
 +
Starting kernel ...
 +
 +
console [ttyPS0] enabled, bootconsole disabled
 +
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to d0866000
 +
brd: module loaded
 +
loop: module loaded
 +
xqspips e000d000.ps7-qspi: master is unqueued, this is deprecated
 +
xqspips e000d000.ps7-qspi: at 0xE000D000 mapped to 0xD0868000, irq=51
 +
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
 +
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
 +
libphy: XEMACPS mii bus: probed
 +
xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
 +
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +
ehci-pci: EHCI PCI platform driver
 +
ULPI transceiver vendor/product ID 0x0424/0x0006
 +
Found SMSC USB331x ULPI transceiver.
 +
ULPI integrity check: passed.
 +
xusbps-ehci xusbps-ehci.0: Xilinx PS USB EHCI Host Controller
 +
xusbps-ehci xusbps-ehci.0: new USB bus registered, assigned bus number 1
 +
xusbps-ehci xusbps-ehci.0: irq 53, io mem 0x00000000
 +
xusbps-ehci xusbps-ehci.0: USB 2.0 started, EHCI 1.00
 +
hub 1-0:1.0: USB hub found
 +
hub 1-0:1.0: 1 port detected
 +
usbcore: registered new interface driver usb-storage
 +
mousedev: PS/2 mouse device common for all mice
 +
i2c /dev entries driver
 +
usbcore: registered new interface driver uvcvideo
 +
USB Video Class driver (1.1.1)
 +
xadcps f8007100.ps7-xadc: enabled:      yes    reference:      external
 +
zynq_wdt f8005000.ps7-wdt: Xilinx Watchdog Timer at d0874000 with timeout 10s
 +
zynq-edac f8006000.ps7-ddrc: ecc not enabled
 +
sdhci: Secure Digital Host Controller Interface driver
 +
sdhci: Copyright(c) Pierre Ossman
 +
sdhci-pltfm: SDHCI platform and OF driver helper
 +
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
 +
mmc1: SDHCI controller on e0101000.ps7-sdio [e0101000.ps7-sdio] using ADMA
 +
usbcore: registered new interface driver usbhid
 +
mmc0: new high speed SDHC card at address 0002
 +
mmcblk0: mmc0:0002 00000 7.32 GiB
 +
mmcblk0: p1 p2
 +
usbhid: USB HID core driver
 +
TCP: cubic registered
 +
NET: Registered protocol family 17
 +
Registering SWP/SWPB emulation handler
 +
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
 +
xvdma xvdma.0: Xilinx VDMA probe successful
 +
xvdma xvdma.0: Devices Scanned 0
 +
Configuring Ethernet phy KSZ9021 for SOMZ V2.0
 +
IP-Config: Guessing netmask 255.255.0.0
 +
IP-Config: Gateway not on directly connected network
 +
EXT4-fs (mmcblk0p2): recovery complete
 +
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
 +
VFS: Mounted root (ext4 filesystem) on device 179:2.
 +
devtmpfs: mounted
 +
Freeing unused kernel memory: 172K (c0583000 - c05ae000)
 +
INIT: version 2.88 booting
 +
[info] Using makefile-style concurrent boot in runlevel S.
 +
[....] Starting the hotplug events dispatcher: udevdudevd[627]: starting version 175
 +
. ok
 +
[ ok ] Synthesizing the initial hotplug events...done.
 +
[ ok ] Waiting for /dev to be fully populated...done.
 +
[ ok ] Activating swap...done.
 +
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
 +
[....] Checking root file system...fsck from util-linux 2.20.1
 +
debian: clean, 22016/131072 files, 248926/524288 blocks
 +
done.
 +
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Activating lvm and md swap...done.
 +
[....] Checking file systems...fsck from util-linux 2.20.1
 +
done.
 +
[....] Mounting local filesystems...FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
 +
done.
 +
[ ok ] Activating swapfile swap...done.
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Setting kernel variables ...done.
 +
[....] Configuring network interfaces...Configuring Ethernet phy KSZ9021 for SOMZ V2.0
 +
xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
 +
xemacps e000b000.ps7-ethernet: link up (100/FULL)
 +
gw: No address associated with name
 +
ifconfig: `--help' gives usage information.
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
 +
[FAIL] startpar: service(s) returned failure: networking ... failed!
 +
INIT: Entering runlevel: 2
 +
[info] Using makefile-style concurrent boot in runlevel 2.
 +
Starting Dropbear SSH server: [abort] NO_START is not set to zero in /etc/default/dropbear
 +
NET: Registered protocol family 10
 +
[ ok ] Starting OpenBSD Secure Shell server: sshd.
 +
Zynq burning...
 +
[FAIL] Starting receiver daemon: receiver[....] receiver daemon failed to start ... failed!
 +
failed!
 +
[FAIL] startpar: service(s) returned failure: receiver ... failed!
 +
 +
Debian GNU/Linux 7 plda ttyPS0
 +
</source>
 +
|hidden = 1
 +
}}
 +
 +
{{Hider|title = Ядро от Xilinx 3.18 PREEMPT RT, собранное выше 
 +
|content = <source lang="bash">
 +
U-Boot 2013.10-dirty (Jan 28 2014 - 17:52:15)
 +
 +
Memory: ECC disabled
 +
DRAM:  512 MiB
 +
Board: SOMZ-V2.0, PLDA Ltd <http://plda.com>
 +
MMC:  zynq_sdhci: 0, zynq_sdhci: 1
 +
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
 +
*** Warning - bad CRC, using default environment
 +
 +
In:    serial
 +
Out:  serial
 +
Err:  serial
 +
Net:  Gem.e000b000
 +
Hit any key to stop autoboot:  0
 +
Booting Debian from microSD Card...
 +
Device: zynq_sdhci
 +
Manufacturer ID: 1b
 +
OEM: 534d
 +
Name: 00000
 +
Tran Speed: 50000000
 +
Rd Block Len: 512
 +
SD version 2.0
 +
High Capacity: Yes
 +
Capacity: 7.3 GiB
 +
Bus Width: 4-bit
 +
reading uImage
 +
3503408 bytes read in 309 ms (10.8 MiB/s)
 +
reading somz.dtb
 +
8698 bytes read in 16 ms (530.3 KiB/s)
 +
## Booting kernel from Legacy Image at 03000000 ...
 +
  Image Name:  Linux-3.18.0-rt2-xilinx-06188-gc
 +
  Image Type:  ARM Linux Kernel Image (uncompressed)
 +
  Data Size:    3503344 Bytes = 3.3 MiB
 +
  Load Address: 00008000
 +
  Entry Point:  00008000
 +
  Verifying Checksum ... OK
 +
## Flattened Device Tree blob at 02a00000
 +
  Booting using the fdt blob at 0x2a00000
 +
  Loading Kernel Image ... OK
 +
  Loading Device Tree to 0fffa000, end 0ffff1f9 ... OK
 +
 +
Starting kernel ...
 +
</source>
 +
|hidden = 1
 +
}}
 +
 +
{{Hider|title = Ядро OSADL 3.12.24 PREEMPT RT
 +
|content = <source lang="bash">
 +
U-Boot 2013.10-dirty (Jan 28 2014 - 17:52:15)
 +
 +
Memory: ECC disabled
 +
DRAM:  512 MiB
 +
Board: SOMZ-V2.0, PLDA Ltd <http://plda.com>
 +
MMC:  zynq_sdhci: 0, zynq_sdhci: 1
 +
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
 +
*** Warning - bad CRC, using default environment
 +
 +
In:    serial
 +
Out:  serial
 +
Err:  serial
 +
Net:  Gem.e000b000
 +
Hit any key to stop autoboot:  0
 +
Booting Debian from microSD Card...
 +
Device: zynq_sdhci
 +
Manufacturer ID: 1b
 +
OEM: 534d
 +
Name: 00000
 +
Tran Speed: 50000000
 +
Rd Block Len: 512
 +
SD version 2.0
 +
High Capacity: Yes
 +
Capacity: 7.3 GiB
 +
Bus Width: 4-bit
 +
reading uImage
 +
3488208 bytes read in 311 ms (10.7 MiB/s)
 +
reading somz.dtb
 +
8698 bytes read in 16 ms (530.3 KiB/s)
 +
## Booting kernel from Legacy Image at 03000000 ...
 +
  Image Name:  Linux-3.12.24-rt38-xilinx
 +
  Image Type:  ARM Linux Kernel Image (uncompressed)
 +
  Data Size:    3488144 Bytes = 3.3 MiB
 +
  Load Address: 00008000
 +
  Entry Point:  00008000
 +
  Verifying Checksum ... OK
 +
## Flattened Device Tree blob at 02a00000
 +
  Booting using the fdt blob at 0x2a00000
 +
  Loading Kernel Image ... OK
 +
  Loading Device Tree to 0fffa000, end 0ffff1f9 ... OK
 +
 +
Starting kernel ...
 +
 +
console [ttyPS0] enabled, bootconsole disabled
 +
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to d0866000
 +
brd: module loaded
 +
loop: module loaded
 +
hwlat_detector: version 1.0.0
 +
xqspips e000d000.ps7-qspi: master is unqueued, this is deprecated
 +
xqspips e000d000.ps7-qspi: at 0xE000D000 mapped to 0xD0868000, irq=51
 +
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
 +
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
 +
libphy: XEMACPS mii bus: probed
 +
xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
 +
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +
ehci-pci: EHCI PCI platform driver
 +
xusbps-dr e0002000.ps7-usb: Unable to init USB phy, missing?
 +
usbcore: registered new interface driver usb-storage
 +
mousedev: PS/2 mouse device common for all mice
 +
i2c /dev entries driver
 +
xadcps f8007100.ps7-xadc: enabled:      yes    reference:      external
 +
zynq_wdt f8005000.ps7-wdt: Xilinx Watchdog Timer at d0870000 with timeout 10s
 +
zynq-edac f8006000.ps7-ddrc: ecc not enabled
 +
sdhci: Secure Digital Host Controller Interface driver
 +
sdhci: Copyright(c) Pierre Ossman
 +
sdhci-pltfm: SDHCI platform and OF driver helper
 +
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
 +
mmc1: SDHCI controller on e0101000.ps7-sdio [e0101000.ps7-sdio] using ADMA
 +
usbcore: registered new interface driver usbhid
 +
mmc0: new high speed SDHC card at address 0002
 +
mmcblk0: mmc0:0002 00000 7.32 GiB
 +
mmcblk0: p1 p2
 +
usbhid: USB HID core driver
 +
ipip: IPv4 over IPv4 tunneling driver
 +
TCP: cubic registered
 +
NET: Registered protocol family 10
 +
sit: IPv6 over IPv4 tunneling driver
 +
NET: Registered protocol family 17
 +
8021q: 802.1Q VLAN Support v1.8
 +
NET: Registered protocol family 41
 +
Registering SWP/SWPB emulation handler
 +
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
 +
IP-Config: Guessing netmask 255.255.0.0
 +
IP-Config: Gateway not on directly connected network
 +
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
 +
VFS: Mounted root (ext4 filesystem) on device 179:2.
 +
devtmpfs: mounted
 +
Freeing unused kernel memory: 920K (c0682000 - c0768000)
 +
INIT: version 2.88 booting
 +
[info] Using makefile-style concurrent boot in runlevel S.
 +
[....] Starting the hotplug events dispatcher: udevdudevd[743]: starting version 175
 +
. ok
 +
[ ok ] Synthesizing the initial hotplug events...done.
 +
[ ok ] Waiting for /dev to be fully populated...done.
 +
[ ok ] Activating swap...done.
 +
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
 +
[....] Checking root file system...fsck from util-linux 2.20.1
 +
debian: clean, 22016/131072 files, 248929/524288 blocks
 +
done.
 +
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Activating lvm and md swap...done.
 +
[....] Checking file systems...fsck from util-linux 2.20.1
 +
done.
 +
[....] Mounting local filesystems...FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
 +
done.
 +
[ ok ] Activating swapfile swap...done.
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Setting kernel variables ...done.
 +
xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
 +
xemacps e000b000.ps7-ethernet: link up (100/FULL)
 +
[....] Configuring network interfaces...gw: No address associated with name
 +
ifconfig: `--help' gives usage information.
 +
[ ok ] Cleaning up temporary files....
 +
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
 +
[FAIL] startpar: service(s) returned failure: networking ... failed!
 +
INIT: Entering runlevel: 2
 +
[info] Using makefile-style concurrent boot in runlevel 2.
 +
Starting Dropbear SSH server: [abort] NO_START is not set to zero in /etc/default/dropbear
 +
xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
 +
xemacps e000b000.ps7-ethernet: link up (100/FULL)
 +
[ ok ] Starting OpenBSD Secure Shell server: sshd.
 +
Zynq burning...
 +
[FAIL] Starting receiver daemon: receiver[....] receiver daemon failed to start ... failed!
 +
failed!
 +
[FAIL] startpar: service(s) returned failure: receiver ... failed!
 +
 +
Debian GNU/Linux 7 plda ttyPS0
 +
</source>
 +
|hidden = 1
 +
}}
  
 
[[Категория:HOWTO]]
 
[[Категория:HOWTO]]
 
[[Категория:Oryx]]
 
[[Категория:Oryx]]
 +
[[Категория:Zynq]]
 +
[[Категория:EmbeddedLinux]]

Текущая версия на 15:03, 9 ноября 2016

Приведенный мануал справедлив для Kubuntu 14.04 64bit.

Xilinx-design-flow-linux.jpg

Втянуться в тему можно на странице Xilinx Wiki Getting Starting.

Наша цель - собрать новый uImage с применением патча PREEMPT_RT.

Если смотреть на схему, то складывается ощущение, что ядро входит в BOOT.BIN. Но на практике флешка содержит boot.bin, device tree, uImage и образ rootfs. Например, на ZC702:

root@zynq:/mnt# ls -la
drwxr-xr-x    3 root     root          4096 Jan  1 00:00 .
drwxrwxr-x   19 1000     1000             0 Aug 15  2014 ..
drwxr-xr-x    5 root     root          4096 Aug 15  2014 .Trash-1000
-rwxr-xr-x    1 root     root        442480 Jun 19  2014 boot.bin
-rwxr-xr-x    1 root     root          9219 Jun  3  2014 devicetree.dtb
-rwxr-xr-x    1 root     root       3488208 May 30  2001 uImage
-rwxr-xr-x    1 root     root       6054766 Aug 15  2014 uramdisk.image.gz

Поэтому простая подмена uImage тоже работает.

Содержание

[править] Устанавливаем кросскомпилятор

Теоретически этот шаг можно пропустить, воспользовавшись билд-сервером. Но на практике я использовал кросс-компилятор от Xilinx'а.

[править] Скачиваем инсталлер

Страница на Xilinx Wiki: Install Xilinx Tools ведет в раздел Downloads.

На текущий момент самая свежая версия имеет номер 2014.4, поэтому скачиваем Vivado 2014.4 WebInstall for Linux 64.

Потребуется зарегистрироваться на сайте (требует пароль с циферкой ;)).

В результате получаем файл типа Xilinx_Vivado_SDK_2014.4_1119_1_Lin64.bin

[править] Устанавливаем SDK

Устанавливаем SDK и, при желании, Vivado WebKit. Оба инструмента бесплатные:

sudo ./Xilinx_Vivado_SDK_2014.4_1119_1_Lin64.bin

В начале установки поступит предложение Select Edition to Install, выбираем:

  • Vivado Web Pack, если хотим установить Vivado+SDK
  • Software Development Kit, если хотим ограничиться SDK

Драйвер для кабеля для компиляции ядра не потребуется, но иметь в системе его полезно.

Директорию установки оставляем по-умолчанию в /opt

После скачивания файлов программа установки предложит получить лицензию на сайте Xilinx, что и следует сделать (Get Free License, далее Xilinx MicroBlaze/All Programmable SoC Software Development Kit - Standalone для SDK или Vivado WebPACK License для Vivado).

[править] Прописываем пути в PATH

По-умолчанию интерпретатор не знает пути до компиляторов. В переменную PATH их умеет добавлять специальный скрипт. Чтобы не вызывать его каждый раз руками, следует добавить строки в ~/.bashrc:

export CROSS_COMPILE=arm-xilinx-linux-gnueabi-
source /opt/Xilinx/SDK/2014.4/settings64.sh # use settings32.sh on 32-bit operating systems

Переменная CROSS_COMPILE используется в некоторых Makefile'ах ниже. Сейчас с её помощью выбран кросс-компилятор для целевой Linux.

Появились новые возможности:

  • можно открыть среду разработки командой xsdk
  • можно компилировать прошивку для приемника не на билд-сервере, а на своей машине.

[править] Заставляем работать кросскомпилятор

Самый простой способ убедиться, что кросскомпилятор начал работать - скомпилировать с его помощью прошивку для приемника.

Для этого в personal.conf изменяем SERVER_BUILD_FIRMWARE на 0 и добавляем TOOLS, GCC, GPP:

SERVER_BUILD_FIRMWARE=0

TOOLS=LC_ALL=POSIX arm-xilinx-linux-gnueabi
GCC=$(TOOLS)-gcc $(CFLAGS)
GPP=$(TOOLS)-g++ $(CFLAGS)

Дале выполняем make в /src/firmware, на что получаем невнятное сообщение об отсутствии в системе компилятора arm-xilinx-linux-gnueabi-g++. Дело в том, что для его работы нужен ряд 32-битных библиотек:

sudo apt-get install lib32z1

После чего кросскомплилятор начинает успешно работать.

[править] Собираем Xilinx U-boot

Нам потребуется mkimage, которая входит в пакет сборки u-boot'а. Эта утилита позволяет завернуть файл ядра Image в uIamge, который уже может быть запущен u-boot'ом.

Забираем у Xilinx'a:

git clone git://github.com/Xilinx/u-boot-xlnx.git

Собираем (нам потребуется пока только mkimage, поэтому конкретный конфиг не важен):

cd u-boot-xlnx
make zynq_zc70x_config
make

В каталоге ./tools появился mkimage, которым мы далее будем пользоваться.

[править] Ядро от OSADL

Существует замечательная контора OSADL, занимающаяся тестированием PREEMPT_RT патча на различных сборках и архитектурах. Они протестировали ядро 3.12.24 с PREEMPT_RT патчем на ZedBoard. Более того, они предоставляют удобные скрипты, которые сами скачивают все нужные ядра (доступен по ссылке внизу страницы, копия).


[править] Скачиваем ядро, патчи, патчим ядро

Скрипт:

  • скачивает с kernel.org ванильное ядро 3.12.24
  • скачивает с сайта OSADL забирает патчи (см. файл series и перечень ниже) для сборки rbs8:
  • применяет патчи к ядру (quilt push -a)
  • скачивает с сайта OSADL .config файл для сборки rbs8

В патчи входит:

[править] patch-3.12.24-rt38.patch

Собственно PREEMPT_RT патч для данного ядра. Переписывает spinlock'и и т.п. так, чтобы более приоритетная задача их могла быстро выгрузить.

[править] zedboard-monster.patch

Огромный патч для поддержки Zynq'а. Содержит:

  • Патчи к ряду важнейших функция ядра
  • Набор device tree файлов (zynq-zc702.dtb, zynq-zc702-base-trd.dtb, zynq-zc702-drm-v4l2.dtb, zynq-afx-nand.dtb, zynq-afx-nor.dtb, zynq-cc108.dtb, zynq-zc770-xm010.dtb, zynq-zc770-xm011.dtb, zynq-zc770-xm012.dtb, zynq-zc770-xm013.dtb, zynq-zc706.dtb, zynq-zed.dtb)
  • Набор конфигов (xilinx_zynq_apf_defconfig, xilinx_zynq_trd_defconfig, xilinx_zynq_drm_defconfig, xilinx_zynq_defconfig)
  • Огромный набор драйверов (AXI, DMA, GPIO, xdevcfg, SPI, USB и т.д.)
  • Документация к драйверам

[править] sched-add-per-cpu-load-measurement.patch

[править] add-kernel-parameter-to-disable-defect-cpus.patch

[править] drivers-misc-kconfig-replace-spaces-with-tabs.patch

[править] save-current-patchset-in-kernel.patch

[править] mm-slabinfo-fix-latency.patch

Фиксит длительный mutex в чтении /proc/slabinfo

[править] drivers-gpu-drm-try-loading-builtin-edids-first.patch

[править] drivers-gpu-drm-make-edid_load-return-a-void.patch

[править] add-cpufreq-operating-points-to-dt.patch

[править] Сборка ядра

Рассказываем, где искать mkimage (потребуется для обертки ядра Image -> uImage)

cd u-boot-xlnx
cd tools
export PATH=`pwd`:$PATH

Возвращаемся в linux-3.12.24-rt38.

Собираем ядро, выполнив в директории linux-3.12.24-rt38 команду make:

make ARCH=arm UIMAGE_LOADADDR=0x8000 uImage

Минут через 5 получаем в каталоге ./arch/arm/boot собранное ядро.

[править] Ядро от Xilinx

Подробнее описано на Wiki Xilinx'а: Build kernel.

[править] Получаем исходники ядра

git clone git://github.com/Xilinx/linux-xlnx.git

В ядро уже включен набор драйверов от Xilinx'а.

[править] Патчим ядро

На данный момент (02.03.2015) в репозитории лежит ядро 3.18, для которого есть доступный PREEMPT RT патч 3.18.7-rt2.

Качаем патч PREEMPT RT (может потребоваться актуализировать номер версии):

cp -R linux-xlnx linux-rt      
cd linux-rt
wget https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.7-rt2.patch.gz
gunzip patch-3.18.7-rt2.patch

Применяем патч к ядру:

cat patch-3.18.7-rt2.patch | patch -p1

[править] Конфигурируем ядро

Просим собрать конфиг по-умолчанию:

make ARCH=arm xilinx_zynq_defconfig

Вносим желаемые изменения в .config файл, компилируем...и это ядро не запускается на Ориксе.

[править] Пара слов о Device Tree

На PLDA'шных модулях можно найти скомпилированный Device Tree Blob файл. Он легко переводится в читаемый DTS вид:

/dtc$ ./dtc -I dtb -O dts -o somz.dts somz.dtb

Утилита dtc доступна в виде исходников в Xilinix'овском гитхабе. Для компиляции потребовалось установить в систему bison и flex.

Получаем:



[править] Лог загрузки различных ядер



Персональные инструменты
Пространства имён

Варианты
Действия
SRNS Wiki
Рабочие журналы
Приватный файлсервер
QNAP Сервер
Инструменты